Overclock.net › Forums › Intel › Intel CPUs › [OFFICIAL] == Sandy Bridge-E == Overclock Leaderboard & Owners Club ==
New Posts  All Forums:Forum Nav:

[OFFICIAL] == Sandy Bridge-E == Overclock Leaderboard & Owners Club == - Page 129

post #1281 of 2282
Currently I am at 4.5GHZ with 1.378V measured and it is while folding, I get it about once every three of four days but I am 18 hours Prime 95 stable...
post #1282 of 2282
Quote:
Originally Posted by zdude View Post

Currently I am at 4.5GHZ with 1.378V measured and it is while folding, I get it about once every three of four days but I am 18 hours Prime 95 stable...
Temps?
Jenn
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7-3930k Asus rampage 4 extreme EVGA 670 FTW Patriot Viper Extreme  
Hard DriveOptical DriveCoolingCooling
OCZ Vertex 4  Asus 12X BDRW XSPC Raystorm RX360 Kit XSPC RX120mm Radiator 
CoolingCoolingOSMonitor
9X120mm Silenx 74CFM 15dBA Fans Radiator Fans: 4X120mm Delta 113.11CFM Jet Engi... Windows 7 Professional 64bit ViewSonic VX2453mh-LED 24"  
KeyboardPowerCaseMouse
Logitech G110 Cooler Master RS850-AMBAJ3-US Silent Pro M 850W Rosewill BlackHawk Ultra Cooler Master Storm 
  hide details  
Reply
Jenn
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7-3930k Asus rampage 4 extreme EVGA 670 FTW Patriot Viper Extreme  
Hard DriveOptical DriveCoolingCooling
OCZ Vertex 4  Asus 12X BDRW XSPC Raystorm RX360 Kit XSPC RX120mm Radiator 
CoolingCoolingOSMonitor
9X120mm Silenx 74CFM 15dBA Fans Radiator Fans: 4X120mm Delta 113.11CFM Jet Engi... Windows 7 Professional 64bit ViewSonic VX2453mh-LED 24"  
KeyboardPowerCaseMouse
Logitech G110 Cooler Master RS850-AMBAJ3-US Silent Pro M 850W Rosewill BlackHawk Ultra Cooler Master Storm 
  hide details  
Reply
post #1283 of 2282
Hottest cores hit 74C on a warm day like today (heatwave anyone)
post #1284 of 2282
At 4.5 my vcore was at 1.33. But every chip needs different settings so i really don't know what to tell you? This never happens at stock speeds? Like you went the 5 days with no issues?
Jenn
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7-3930k Asus rampage 4 extreme EVGA 670 FTW Patriot Viper Extreme  
Hard DriveOptical DriveCoolingCooling
OCZ Vertex 4  Asus 12X BDRW XSPC Raystorm RX360 Kit XSPC RX120mm Radiator 
CoolingCoolingOSMonitor
9X120mm Silenx 74CFM 15dBA Fans Radiator Fans: 4X120mm Delta 113.11CFM Jet Engi... Windows 7 Professional 64bit ViewSonic VX2453mh-LED 24"  
KeyboardPowerCaseMouse
Logitech G110 Cooler Master RS850-AMBAJ3-US Silent Pro M 850W Rosewill BlackHawk Ultra Cooler Master Storm 
  hide details  
Reply
Jenn
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7-3930k Asus rampage 4 extreme EVGA 670 FTW Patriot Viper Extreme  
Hard DriveOptical DriveCoolingCooling
OCZ Vertex 4  Asus 12X BDRW XSPC Raystorm RX360 Kit XSPC RX120mm Radiator 
CoolingCoolingOSMonitor
9X120mm Silenx 74CFM 15dBA Fans Radiator Fans: 4X120mm Delta 113.11CFM Jet Engi... Windows 7 Professional 64bit ViewSonic VX2453mh-LED 24"  
KeyboardPowerCaseMouse
Logitech G110 Cooler Master RS850-AMBAJ3-US Silent Pro M 850W Rosewill BlackHawk Ultra Cooler Master Storm 
  hide details  
Reply
post #1285 of 2282
Yes, I never had this happen at stock, and it is beginning to ***** me off.
post #1286 of 2282
1.378 is defintely what you need to be stable?
Jenn
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7-3930k Asus rampage 4 extreme EVGA 670 FTW Patriot Viper Extreme  
Hard DriveOptical DriveCoolingCooling
OCZ Vertex 4  Asus 12X BDRW XSPC Raystorm RX360 Kit XSPC RX120mm Radiator 
CoolingCoolingOSMonitor
9X120mm Silenx 74CFM 15dBA Fans Radiator Fans: 4X120mm Delta 113.11CFM Jet Engi... Windows 7 Professional 64bit ViewSonic VX2453mh-LED 24"  
KeyboardPowerCaseMouse
Logitech G110 Cooler Master RS850-AMBAJ3-US Silent Pro M 850W Rosewill BlackHawk Ultra Cooler Master Storm 
  hide details  
Reply
Jenn
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7-3930k Asus rampage 4 extreme EVGA 670 FTW Patriot Viper Extreme  
Hard DriveOptical DriveCoolingCooling
OCZ Vertex 4  Asus 12X BDRW XSPC Raystorm RX360 Kit XSPC RX120mm Radiator 
CoolingCoolingOSMonitor
9X120mm Silenx 74CFM 15dBA Fans Radiator Fans: 4X120mm Delta 113.11CFM Jet Engi... Windows 7 Professional 64bit ViewSonic VX2453mh-LED 24"  
KeyboardPowerCaseMouse
Logitech G110 Cooler Master RS850-AMBAJ3-US Silent Pro M 850W Rosewill BlackHawk Ultra Cooler Master Storm 
  hide details  
Reply
post #1287 of 2282
Hey guys. I been reading all of the guides but there are so many settings and I'm not sure if there's a few specific ones I should be concentrating on that help the most?

Current situation- I need Vcore of 1.5v to be able to get into Windows. I set the boot voltage higher, but it wasn't helping much since I would get to the Windows logo and would crash after a few seconds, until I raised Vcore to 1.5v. It's stable at that speed, stable enough to run 3dMark11, and Prime for me to check out temps. But looking at the OP it seems everyone else is using much less voltage when I checked out a few validations of ~5Ghz. I played around a bit with VCCSA and CPU PLL OV, but they didn't seem to help much even with +.2v overvolt. I think I had LLC on High for this as well, so load voltage was actually slightly higher than 1.5v. Any suggestions on maintaining stability while being able to lower Vcore?
My Only Hobby
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 3930k Rampage IV Extreme EVGA 980Ti SC 16GB Samsung 30nm 
Hard DriveCoolingOSMonitor
Seagate 3TB 7200rpm H100 Windows 8.1 Acer XB240H 
KeyboardPowerCaseMouse
Razer Lycosa Cooler Master 1200w Silent Pro Gold Cooler Master HAF X Razer DeathAdder 
  hide details  
Reply
My Only Hobby
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 3930k Rampage IV Extreme EVGA 980Ti SC 16GB Samsung 30nm 
Hard DriveCoolingOSMonitor
Seagate 3TB 7200rpm H100 Windows 8.1 Acer XB240H 
KeyboardPowerCaseMouse
Razer Lycosa Cooler Master 1200w Silent Pro Gold Cooler Master HAF X Razer DeathAdder 
  hide details  
Reply
post #1288 of 2282
Quote:
Originally Posted by dph314 View Post

Hey guys. I been reading all of the guides but there are so many settings and I'm not sure if there's a few specific ones I should be concentrating on that help the most?
Current situation- I need Vcore of 1.5v to be able to get into Windows. I set the boot voltage higher, but it wasn't helping much since I would get to the Windows logo and would crash after a few seconds, until I raised Vcore to 1.5v. It's stable at that speed, stable enough to run 3dMark11, and Prime for me to check out temps. But looking at the OP it seems everyone else is using much less voltage when I checked out a few validations of ~5Ghz. I played around a bit with VCCSA and CPU PLL OV, but they didn't seem to help much even with +.2v overvolt. I think I had LLC on High for this as well, so load voltage was actually slightly higher than 1.5v. Any suggestions on maintaining stability while being able to lower Vcore?
Motherboard?
Jenn
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7-3930k Asus rampage 4 extreme EVGA 670 FTW Patriot Viper Extreme  
Hard DriveOptical DriveCoolingCooling
OCZ Vertex 4  Asus 12X BDRW XSPC Raystorm RX360 Kit XSPC RX120mm Radiator 
CoolingCoolingOSMonitor
9X120mm Silenx 74CFM 15dBA Fans Radiator Fans: 4X120mm Delta 113.11CFM Jet Engi... Windows 7 Professional 64bit ViewSonic VX2453mh-LED 24"  
KeyboardPowerCaseMouse
Logitech G110 Cooler Master RS850-AMBAJ3-US Silent Pro M 850W Rosewill BlackHawk Ultra Cooler Master Storm 
  hide details  
Reply
Jenn
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7-3930k Asus rampage 4 extreme EVGA 670 FTW Patriot Viper Extreme  
Hard DriveOptical DriveCoolingCooling
OCZ Vertex 4  Asus 12X BDRW XSPC Raystorm RX360 Kit XSPC RX120mm Radiator 
CoolingCoolingOSMonitor
9X120mm Silenx 74CFM 15dBA Fans Radiator Fans: 4X120mm Delta 113.11CFM Jet Engi... Windows 7 Professional 64bit ViewSonic VX2453mh-LED 24"  
KeyboardPowerCaseMouse
Logitech G110 Cooler Master RS850-AMBAJ3-US Silent Pro M 850W Rosewill BlackHawk Ultra Cooler Master Storm 
  hide details  
Reply
post #1289 of 2282
Quote:
Originally Posted by struddles View Post

Quote:
Originally Posted by dph314 View Post

Hey guys. I been reading all of the guides but there are so many settings and I'm not sure if there's a few specific ones I should be concentrating on that help the most?
Current situation- I need Vcore of 1.5v to be able to get into Windows. I set the boot voltage higher, but it wasn't helping much since I would get to the Windows logo and would crash after a few seconds, until I raised Vcore to 1.5v. It's stable at that speed, stable enough to run 3dMark11, and Prime for me to check out temps. But looking at the OP it seems everyone else is using much less voltage when I checked out a few validations of ~5Ghz. I played around a bit with VCCSA and CPU PLL OV, but they didn't seem to help much even with +.2v overvolt. I think I had LLC on High for this as well, so load voltage was actually slightly higher than 1.5v. Any suggestions on maintaining stability while being able to lower Vcore?
Motherboard?

check his sig, RIVE...
post #1290 of 2282
Is it because HT is on? It usually require that much more voltage?
My Only Hobby
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 3930k Rampage IV Extreme EVGA 980Ti SC 16GB Samsung 30nm 
Hard DriveCoolingOSMonitor
Seagate 3TB 7200rpm H100 Windows 8.1 Acer XB240H 
KeyboardPowerCaseMouse
Razer Lycosa Cooler Master 1200w Silent Pro Gold Cooler Master HAF X Razer DeathAdder 
  hide details  
Reply
My Only Hobby
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 3930k Rampage IV Extreme EVGA 980Ti SC 16GB Samsung 30nm 
Hard DriveCoolingOSMonitor
Seagate 3TB 7200rpm H100 Windows 8.1 Acer XB240H 
KeyboardPowerCaseMouse
Razer Lycosa Cooler Master 1200w Silent Pro Gold Cooler Master HAF X Razer DeathAdder 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [OFFICIAL] == Sandy Bridge-E == Overclock Leaderboard & Owners Club ==