I recently bought 3 x 1280x1024 Flatron L1942P Monitors off ebay dirt cheap (£45 each) for some eyefinity fun.
I have already removed the bezel on one of the monitors to see what's underneath and there is a substantial difference in bezel size - so IMO it is worth it remove the bezels all together seeing as i can effectivly half the interuption between the screens - and i can still use the original stands too due to the screw holes being inbedded in the back of the monitor itself (not just the plastic casing).
There are a few problems i'll need to resolve first though.
1.) When i take the shroud off the monitor, the part that powers the monitor and the monitor itself becomes disconnected. I was thinking of using metal adhesive to join them permenantly. Would it be okay to use what effectivly is 'metal-glue' to connect these parts back together again?
2.) With the power box being exposed at the back is there any risk of electric shock or something shorting out? If so, is there any kind of box or make-shift shroud that would mitigate such a problem?
3.) There is a long green PCB running along the top rear of the monitor. Same question as above really - is there any danger to having such a componant exposed?
Any helpful advice or comments would be greatly appriciated.
Thanks in advance!