Overclock.net › Forums › Hardware Vendors › Case Labs › Rubber feet on TH10
New Posts  All Forums:Forum Nav:

Rubber feet on TH10

post #1 of 3
Thread Starter 
Hello,
I received my TH10 recently and it looks great. I can't wait to start my new build in it. I have a small problem though. The bottom of the case has what seem like 4 places for the rubber feet, with 4 holes each in a square on each corner of the case. But the rubber feet are circular with a single large hole in the center for one screw each. Am I wrong in my thinking, get the wrong parts, or just doing it wrong? Any help would be appreciated. Thanks
post #2 of 3
the 4 holes are for the caster kit. the rubber feet can go in any one of the 4 holes... i think the outside corner one is the best fit.
stable again
(25 items)
 
  
CPUCPUMotherboardGraphics
E5-2687W E5-2687W ASUS Z9PED8-WS EVGA GTX 570 (Linux host) 
GraphicsRAMHard DriveHard Drive
EVGA GTX 970 FTW (win7 guest) 64GB G.SKILL 2133 2x Crucial M4 256GB raid1 4x 3TB raid 10 
CoolingCoolingCoolingCooling
2x Apogee HD  2x RX 480 2x MCP 655 RP-452x2 rev2 (new) 
CoolingCoolingOSOS
16x Cougar Turbine CFT12SB4 (new) EK FC 580 Gentoo (host) Gentoo (x23 guests) 
OSMonitorMonitorPower
windows 7 (guest w/ vfio-pci) Viewsonic 23" 1080P Viewsonic 19" Antec HCP Platinum 1000 (new) 
CaseOtherOther
Case Labs TH10 (still the best ever) 2x Lamptron FC-5 IOGEAR 2 way DVI KVM Switch 
  hide details  
Reply
stable again
(25 items)
 
  
CPUCPUMotherboardGraphics
E5-2687W E5-2687W ASUS Z9PED8-WS EVGA GTX 570 (Linux host) 
GraphicsRAMHard DriveHard Drive
EVGA GTX 970 FTW (win7 guest) 64GB G.SKILL 2133 2x Crucial M4 256GB raid1 4x 3TB raid 10 
CoolingCoolingCoolingCooling
2x Apogee HD  2x RX 480 2x MCP 655 RP-452x2 rev2 (new) 
CoolingCoolingOSOS
16x Cougar Turbine CFT12SB4 (new) EK FC 580 Gentoo (host) Gentoo (x23 guests) 
OSMonitorMonitorPower
windows 7 (guest w/ vfio-pci) Viewsonic 23" 1080P Viewsonic 19" Antec HCP Platinum 1000 (new) 
CaseOtherOther
Case Labs TH10 (still the best ever) 2x Lamptron FC-5 IOGEAR 2 way DVI KVM Switch 
  hide details  
Reply
post #3 of 3
Thread Starter 
Thanks Lloyd, I appreciate it. I can't believe I didn't try that before posting. I guess the screw for the rubber feet looked to big for the hole. But now that I try it it fits perfectly. Thanks
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Labs
Overclock.net › Forums › Hardware Vendors › Case Labs › Rubber feet on TH10