Hi guys,
I'm about to start my new build. Details can be found here: http://www.overclock.net/t/1178217/build-log-i73930k-rampage-iv-extreme-case-labs-m8-3-sli-gtx580-full-wc/0_20
I do have a question though:
The top cover of 85mm, is it 85mm usable within the top cover or its outside size? I plan on sticking the RADs in there as they are 58mm thick (RX360 rev2) so that would make 83mm with the fans, that's a tight fit. Feasible?
Edited by yannickhk - 12/4/11 at 11:42pm
I'm about to start my new build. Details can be found here: http://www.overclock.net/t/1178217/build-log-i73930k-rampage-iv-extreme-case-labs-m8-3-sli-gtx580-full-wc/0_20
I do have a question though:
The top cover of 85mm, is it 85mm usable within the top cover or its outside size? I plan on sticking the RADs in there as they are 58mm thick (RX360 rev2) so that would make 83mm with the fans, that's a tight fit. Feasible?
Edited by yannickhk - 12/4/11 at 11:42pm






Some shipping to be done to China lol
). Basically what is the clearance that is left between the PSU and the bottom. If it's more than 25mm that'd be ideal.
