This is a working project that is aimed at installing a dual tec chiller/block for universal cpu's without having the headaches of finding external power supplies, condensation and all the other hassles of tecs.
The projects main goal is using tecs in an overclocked 24/7 rig.
Requirements are at least 2 triple radiators for cooling.
I'm working this project in 3 phases:
1. chiller/block This will house 2 62mm tec @12v with a power consumption of 150w each or total 300w. (FINISHED)
2. controller. This will keep the the cold loop from going under Dew Point. This runs off computers psu and requires 2 pcie cables. Finished
3. base unit. I want to build a base unit that will sit above the cpu that will hold the chiller/block with a built in waterpump/reservoir for the cold loop. This is still in the design phase but any input on this is greatly appreciated. Finished
Progress So Far:
Test Results: Note: Ambient 18c
Edited by Mindchi|l - 1/7/12 at 1:04pm