Overclock.net › Forums › AMD › AMD CPUs › I need HELP getting 1100T to 4.2Ghz
New Posts  All Forums:Forum Nav:

I need HELP getting 1100T to 4.2Ghz - Page 2

post #11 of 25
Unless you have a VERY good chip, you need watercooling or a d14/SA to get a sustainable 4.2ghz clockspeed. Most guys i know with X6's need somewhere from 1.52-1.62v to get 4.2ghz. Running those voltages on air is silly,and in some cases, impossible to get stable. Mine isnt rock solid stable, even at 4ghz. it will fail at about 4 hours into p95. as far as vDroop goes, you need to actually mod the board. Also, your NB needs to be about 2x the speed of your ram. So if its a 1600mhz set, you need to have your NB at about 3200mhz
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
post #12 of 25
Thread Starter 
I'm gonna kick the multiplier down to 20.5 and see if it'll go stable at 4.1.
NEO 1
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2500K AsRock Fatal1ty Professional P67 ASUS Matrix GTX 580 @ 816/1632/1002 2 x 4GB G.Skill RipJaws X 
Hard DriveHard DriveOptical DriveCooling
Crucial M4128GB SSD 500GB Seagate Barracuda LiteOn DVD-RW Corsair H80 
OSMonitorKeyboardPower
Windows 7 Home 64bit SP1 Hanns-G 27.5" @ 1920x1200 Microsoft Sidewinder X4 SeaSonic X750 Gold 750W 
CaseMouseAudioOther
NZXT Tempest 410 Elite Saitek R.A.T. 5 Logitech G930 D-Link Xtreme DWA-556 
  hide details  
Reply
NEO 1
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2500K AsRock Fatal1ty Professional P67 ASUS Matrix GTX 580 @ 816/1632/1002 2 x 4GB G.Skill RipJaws X 
Hard DriveHard DriveOptical DriveCooling
Crucial M4128GB SSD 500GB Seagate Barracuda LiteOn DVD-RW Corsair H80 
OSMonitorKeyboardPower
Windows 7 Home 64bit SP1 Hanns-G 27.5" @ 1920x1200 Microsoft Sidewinder X4 SeaSonic X750 Gold 750W 
CaseMouseAudioOther
NZXT Tempest 410 Elite Saitek R.A.T. 5 Logitech G930 D-Link Xtreme DWA-556 
  hide details  
Reply
post #13 of 25
try increasing the ref clock. That will help you get clocks up. i know the ud3 can handle a max stable ref clock of 255.
Edited by R4Z0R - 12/9/11 at 4:09am
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
post #14 of 25
try increasing the ref clock. That will help you get clocks up without going nuts with the multi. i know the ud3 can handle a max stable ref clock of 255.
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
post #15 of 25
ugh. double post. damn internet.
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
post #16 of 25
can a mod please delete my DP? redface.gif
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
post #17 of 25
Thread Starter 
it seems pretty stable @ 4.1 with only 1.472v under load. Temp seems stable @ 50C after 10min. I think I'm gonna let it burn for a few hours and then try bumpin up the ref clock to get 4.2
NEO 1
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2500K AsRock Fatal1ty Professional P67 ASUS Matrix GTX 580 @ 816/1632/1002 2 x 4GB G.Skill RipJaws X 
Hard DriveHard DriveOptical DriveCooling
Crucial M4128GB SSD 500GB Seagate Barracuda LiteOn DVD-RW Corsair H80 
OSMonitorKeyboardPower
Windows 7 Home 64bit SP1 Hanns-G 27.5" @ 1920x1200 Microsoft Sidewinder X4 SeaSonic X750 Gold 750W 
CaseMouseAudioOther
NZXT Tempest 410 Elite Saitek R.A.T. 5 Logitech G930 D-Link Xtreme DWA-556 
  hide details  
Reply
NEO 1
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2500K AsRock Fatal1ty Professional P67 ASUS Matrix GTX 580 @ 816/1632/1002 2 x 4GB G.Skill RipJaws X 
Hard DriveHard DriveOptical DriveCooling
Crucial M4128GB SSD 500GB Seagate Barracuda LiteOn DVD-RW Corsair H80 
OSMonitorKeyboardPower
Windows 7 Home 64bit SP1 Hanns-G 27.5" @ 1920x1200 Microsoft Sidewinder X4 SeaSonic X750 Gold 750W 
CaseMouseAudioOther
NZXT Tempest 410 Elite Saitek R.A.T. 5 Logitech G930 D-Link Xtreme DWA-556 
  hide details  
Reply
post #18 of 25
Quote:
Originally Posted by toddville393 View Post

it seems pretty stable @ 4.1 with only 1.472v under load. Temp seems stable @ 50C after 10min. I think I'm gonna let it burn for a few hours and then try bumpin up the ref clock to get 4.2
I don't think you'll be able to hit 4.2 GHz.
You'd need more voltage to hit 4.2 GHz stable and by that time you'd run into temp issues.
Dead Ryzen
(12 items)
 
Penguin Box
(9 items)
 
 
CPUMotherboardGraphicsRAM
AMD RYZEN 7 1800X  MSI B350M MORTAR ARCTIC AMD Radeon Vega Frontier Edition G.SKILL TridentZ Series 32GB DDR4 3200 (2 x 16G... 
Hard DriveHard DriveCoolingMonitor
SAMSUNG SSD 950 PRO 512GB Crucial MX300 2TB Noctua NH-U12S  BenQ XL2730Z - 27” 2560x1440 
KeyboardPowerCaseMouse
Das Keyboard 4 Professional Soft Tactile (MX Br... Seasonic X-850(SS-850KM3 Active PFC F3) Fractal Design Define Mini C BenQ ZOWIE EC1-A 
CPUMotherboardGraphicsRAM
Intel Core i7-2600K @4.6 GHz P8Z68-V AMD Radeon RX 480 (ref. design) Mushkin Enhanced Stealth 8GB (2 x 4GB) (PC3 17000) 
Hard DriveCoolingOSPower
SanDisk Extreme PRO 480GB Noctua NH-U12 S Arch Linux Seasonic SS-520FL 520W 
Case
Corsair Vengeance Series C70 
  hide details  
Reply
Dead Ryzen
(12 items)
 
Penguin Box
(9 items)
 
 
CPUMotherboardGraphicsRAM
AMD RYZEN 7 1800X  MSI B350M MORTAR ARCTIC AMD Radeon Vega Frontier Edition G.SKILL TridentZ Series 32GB DDR4 3200 (2 x 16G... 
Hard DriveHard DriveCoolingMonitor
SAMSUNG SSD 950 PRO 512GB Crucial MX300 2TB Noctua NH-U12S  BenQ XL2730Z - 27” 2560x1440 
KeyboardPowerCaseMouse
Das Keyboard 4 Professional Soft Tactile (MX Br... Seasonic X-850(SS-850KM3 Active PFC F3) Fractal Design Define Mini C BenQ ZOWIE EC1-A 
CPUMotherboardGraphicsRAM
Intel Core i7-2600K @4.6 GHz P8Z68-V AMD Radeon RX 480 (ref. design) Mushkin Enhanced Stealth 8GB (2 x 4GB) (PC3 17000) 
Hard DriveCoolingOSPower
SanDisk Extreme PRO 480GB Noctua NH-U12 S Arch Linux Seasonic SS-520FL 520W 
Case
Corsair Vengeance Series C70 
  hide details  
Reply
post #19 of 25
Thread Starter 
Quote:
Originally Posted by Evil Penguin View Post

I don't think you'll be able to hit 4.2 GHz.
You'd need more voltage to hit 4.2 GHz stable and by that time you'd run into temp issues.

well after about 30min I had one worker fail @ 4.1 with 1.47 so I'm turning it up to 1.5v. I think I'm done with 4.2.
NEO 1
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2500K AsRock Fatal1ty Professional P67 ASUS Matrix GTX 580 @ 816/1632/1002 2 x 4GB G.Skill RipJaws X 
Hard DriveHard DriveOptical DriveCooling
Crucial M4128GB SSD 500GB Seagate Barracuda LiteOn DVD-RW Corsair H80 
OSMonitorKeyboardPower
Windows 7 Home 64bit SP1 Hanns-G 27.5" @ 1920x1200 Microsoft Sidewinder X4 SeaSonic X750 Gold 750W 
CaseMouseAudioOther
NZXT Tempest 410 Elite Saitek R.A.T. 5 Logitech G930 D-Link Xtreme DWA-556 
  hide details  
Reply
NEO 1
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2500K AsRock Fatal1ty Professional P67 ASUS Matrix GTX 580 @ 816/1632/1002 2 x 4GB G.Skill RipJaws X 
Hard DriveHard DriveOptical DriveCooling
Crucial M4128GB SSD 500GB Seagate Barracuda LiteOn DVD-RW Corsair H80 
OSMonitorKeyboardPower
Windows 7 Home 64bit SP1 Hanns-G 27.5" @ 1920x1200 Microsoft Sidewinder X4 SeaSonic X750 Gold 750W 
CaseMouseAudioOther
NZXT Tempest 410 Elite Saitek R.A.T. 5 Logitech G930 D-Link Xtreme DWA-556 
  hide details  
Reply
post #20 of 25
well, 4.1 is still bloody fast mate thumb.gif
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › I need HELP getting 1100T to 4.2Ghz