Overclock.net › Forums › Intel › Intel CPUs › 124 BSOD only with FLASH
New Posts  All Forums:Forum Nav:

124 BSOD only with FLASH - Page 3

post #21 of 27
Thread Starter 
Quote:
Originally Posted by technot View Post

what is your vtt? i had to bump my vtt a bit to stabalize at 4.8ghz+ with all 4 dimms occupied on my i5-2500k. (with only 2 dimms i was stable with vtt left on auto)

I did bump VTT aka QPI on Gigabyte Boards. Each time I got it I bumped it up by the lowest amount all the way to 1.07 and was getting the BSOD more frequently. What was yours set at when you did 4.8ish? 4.8 Ghz was bad ass but I haven't had any 124's with flash since dropping to 4.6 at 1.33 and auto QPI/VTT. Also, computer is quieter, which is nice.
CYLONRAIDER
(16 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600K HT @ 4.6Ghz, 1.41v GIGABYTE GA-Z68XP-UD4 2 X ASUS DCII Radeon HD 6970 2GB, Crossfired Corsair Vengeance 16GB DDR3 1600Mhz 
Hard DriveHard DriveCoolingMonitor
Corsair Force Series GT 60GB SRT Caching Western Digital Velociraptor 450GB Antec KÜHLER H2O 920 w/ Scythe Gentle Typhoons 3X ASUS 21" IPS VS229H-P, Eyefinity 
KeyboardPowerCaseMouse
Logitech G15 SeaSonic 1000W 80 PLUS PLATINUM Modular Antec Lanboy Air, Red Logitech G600 
AudioAudio
Schiit BiFrost DAC+ Schiit Asgard Headphone Amp Logitech G930 
  hide details  
Reply
CYLONRAIDER
(16 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600K HT @ 4.6Ghz, 1.41v GIGABYTE GA-Z68XP-UD4 2 X ASUS DCII Radeon HD 6970 2GB, Crossfired Corsair Vengeance 16GB DDR3 1600Mhz 
Hard DriveHard DriveCoolingMonitor
Corsair Force Series GT 60GB SRT Caching Western Digital Velociraptor 450GB Antec KÜHLER H2O 920 w/ Scythe Gentle Typhoons 3X ASUS 21" IPS VS229H-P, Eyefinity 
KeyboardPowerCaseMouse
Logitech G15 SeaSonic 1000W 80 PLUS PLATINUM Modular Antec Lanboy Air, Red Logitech G600 
AudioAudio
Schiit BiFrost DAC+ Schiit Asgard Headphone Amp Logitech G930 
  hide details  
Reply
post #22 of 27
For me the 124 is caused by the CPU dropping to an idle state when doing light loads like 1.6 GHz and ~1 volt on the vcore, but it will fluctuate a bit and sometimes the vcore will be lower than it should be at the lower speeds and cause the BSOD. One way to fix this would be to lower your LLC level and increase vcore so that the idle volts will be slightly higher and when under load vdroop will take care of the rest.
MCP
(17 items)
 
Loki
(2 items)
 
Rinzler
(13 items)
 
CPUMotherboardGraphicsRAM
Intel 2700K 5GHz ~1.475v Asus P8Z68 Deluxe Gen3 EVGA GTX-1080 (4x8GB) Crucial Balistix 1600 MHz 
Hard DriveOptical DriveCoolingOS
A bunch of disks LG DVD Combo Apogee Xt Rev 1.0, 360 Rad + D5 Fedora 25 
OSMonitorMonitorMonitor
Windows 10 Acer 32" 4k Acer 32" 4k Wacom Cintiq 27 QHD 
KeyboardPowerCaseMouse
Ducky Corsair AX850 Coolermaster HAF-X Corsair 
Audio
Xonar DG 
CPUGraphics
Intel i7-4558U Intel Iris 
CPUMotherboardGraphicsRAM
i7 720QM Proprietary GTX 260M 4 gb DDR3 1066 
Hard Drive
500 GB WD Caviar Black 
  hide details  
Reply
MCP
(17 items)
 
Loki
(2 items)
 
Rinzler
(13 items)
 
CPUMotherboardGraphicsRAM
Intel 2700K 5GHz ~1.475v Asus P8Z68 Deluxe Gen3 EVGA GTX-1080 (4x8GB) Crucial Balistix 1600 MHz 
Hard DriveOptical DriveCoolingOS
A bunch of disks LG DVD Combo Apogee Xt Rev 1.0, 360 Rad + D5 Fedora 25 
OSMonitorMonitorMonitor
Windows 10 Acer 32" 4k Acer 32" 4k Wacom Cintiq 27 QHD 
KeyboardPowerCaseMouse
Ducky Corsair AX850 Coolermaster HAF-X Corsair 
Audio
Xonar DG 
CPUGraphics
Intel i7-4558U Intel Iris 
CPUMotherboardGraphicsRAM
i7 720QM Proprietary GTX 260M 4 gb DDR3 1066 
Hard Drive
500 GB WD Caviar Black 
  hide details  
Reply
post #23 of 27
i found 1.07 to be to little with all dimms occupied. anything below 1.2 should be safe, try another bump smile.gif
i7-3930K
(14 items)
 
  
CPUMotherboardGraphicsGraphics
i7-3930K 4700mhz @ 1.376v sabertooth x79 Sapphire Radeon HD 6990 4GB Sapphire Radeon HD 6990 4GB 
RAMHard DriveCoolingOS
Corsair 4x8gb @ 1600mhz Corsair Force GT 120GB Corsair h100 Windows 7 
MonitorMonitorKeyboardPower
Acer 24" BenQ 21.5" Logitech g15 Corsair HX 1050w 
CaseMouse
CM HAF X Big Logitech g9x 
  hide details  
Reply
i7-3930K
(14 items)
 
  
CPUMotherboardGraphicsGraphics
i7-3930K 4700mhz @ 1.376v sabertooth x79 Sapphire Radeon HD 6990 4GB Sapphire Radeon HD 6990 4GB 
RAMHard DriveCoolingOS
Corsair 4x8gb @ 1600mhz Corsair Force GT 120GB Corsair h100 Windows 7 
MonitorMonitorKeyboardPower
Acer 24" BenQ 21.5" Logitech g15 Corsair HX 1050w 
CaseMouse
CM HAF X Big Logitech g9x 
  hide details  
Reply
post #24 of 27
you can also try another notch of vcore? 1.39 isnt really a lot for a 4.8 stable. even tho it may seem like lots of people get lucky and get good chips, i'm betting most chips are just "normal". mine needed 1.42v @ 4.8

edit: you're rig signature doesnt say what sort of a cooler you're using. but remember that these notches add up in temperature, and sufficiant cooling is needed smile.gif
i7-3930K
(14 items)
 
  
CPUMotherboardGraphicsGraphics
i7-3930K 4700mhz @ 1.376v sabertooth x79 Sapphire Radeon HD 6990 4GB Sapphire Radeon HD 6990 4GB 
RAMHard DriveCoolingOS
Corsair 4x8gb @ 1600mhz Corsair Force GT 120GB Corsair h100 Windows 7 
MonitorMonitorKeyboardPower
Acer 24" BenQ 21.5" Logitech g15 Corsair HX 1050w 
CaseMouse
CM HAF X Big Logitech g9x 
  hide details  
Reply
i7-3930K
(14 items)
 
  
CPUMotherboardGraphicsGraphics
i7-3930K 4700mhz @ 1.376v sabertooth x79 Sapphire Radeon HD 6990 4GB Sapphire Radeon HD 6990 4GB 
RAMHard DriveCoolingOS
Corsair 4x8gb @ 1600mhz Corsair Force GT 120GB Corsair h100 Windows 7 
MonitorMonitorKeyboardPower
Acer 24" BenQ 21.5" Logitech g15 Corsair HX 1050w 
CaseMouse
CM HAF X Big Logitech g9x 
  hide details  
Reply
post #25 of 27
Hello everyone, I don't post often but I browse often smile.gif.

Your BSOD is too low vcore during idle. It's brought on by CPU load/unload thrashing. I had this same problem when rendering videos which were bottlenecked by the HD instead of CPU. Only way to fix is increase vcore and allow a little more vdroop so you're not overvolting under load, just as Aesir suggested.
My PC
(16 items)
 
Living Room
(3 items)
 
 
CPUMotherboardGraphicsRAM
Intel 3770K @ 4.5 x 4 or 4.6 x 3, 1.26v, de-lid... MAXIMUS V GENE Radeon HD 7970 GHz @ 1080/1525 2 x 4GB G.Skill @ 2200MHz, 9-10-10-29-2t, 1.60v 
Hard DriveHard DriveOptical DriveCooling
Samsung 840 250GB 2 x 3TB Seagate ST3000VX000 LG Blu-Ray Burner Cooler Master Hyper 212 Evo Lapped 
OSMonitorKeyboardPower
Windows 8 64-bit ASUS VG236HE 23" 2ms 120Hz Logitech 920-000914 Black 106 Normal Keys USB W... Kingwin 550W Platinum 
CaseMouseMouse PadAudio
Fractal Design Define R4 Logitech G9x Rocketfish Sound Blaster ZxR 
MotherboardRAMOS
TZ68A+ Mushkin  Windows 7 Home Premium 64-bit 
  hide details  
Reply
My PC
(16 items)
 
Living Room
(3 items)
 
 
CPUMotherboardGraphicsRAM
Intel 3770K @ 4.5 x 4 or 4.6 x 3, 1.26v, de-lid... MAXIMUS V GENE Radeon HD 7970 GHz @ 1080/1525 2 x 4GB G.Skill @ 2200MHz, 9-10-10-29-2t, 1.60v 
Hard DriveHard DriveOptical DriveCooling
Samsung 840 250GB 2 x 3TB Seagate ST3000VX000 LG Blu-Ray Burner Cooler Master Hyper 212 Evo Lapped 
OSMonitorKeyboardPower
Windows 8 64-bit ASUS VG236HE 23" 2ms 120Hz Logitech 920-000914 Black 106 Normal Keys USB W... Kingwin 550W Platinum 
CaseMouseMouse PadAudio
Fractal Design Define R4 Logitech G9x Rocketfish Sound Blaster ZxR 
MotherboardRAMOS
TZ68A+ Mushkin  Windows 7 Home Premium 64-bit 
  hide details  
Reply
post #26 of 27
Thread Starter 
Quote:
Originally Posted by Aesir View Post

For me the 124 is caused by the CPU dropping to an idle state when doing light loads like 1.6 GHz and ~1 volt on the vcore, but it will fluctuate a bit and sometimes the vcore will be lower than it should be at the lower speeds and cause the BSOD. One way to fix this would be to lower your LLC level and increase vcore so that the idle volts will be slightly higher and when under load vdroop will take care of the rest.

See this is where my lack of understanding about some things starts to come in. My LLC is 6 or 7, which is certainly higher. I've never been super certain entirely about vdroop and how LLC effects voltages while running. I bet you're on to something though. I'm going to give this a shot.
Quote:
Originally Posted by technot View Post

you can also try another notch of vcore? 1.39 isnt really a lot for a 4.8 stable. even tho it may seem like lots of people get lucky and get good chips, i'm betting most chips are just "normal". mine needed 1.42v @ 4.8
edit: you're rig signature doesnt say what sort of a cooler you're using. but remember that these notches add up in temperature, and sufficiant cooling is needed smile.gif

Just for reference, what did you QPI/VTT look like at 4.8? That seems to be what I may be having an issue with, running 16GB at 1600 and having my 2600 running at 4.8 and all.

I hadn't updated my rig stats since they changed the interface. I've since updated it. My CPU cooler handles the 4.8 pretty well, albiet a bit loudly after it's been under full load for awhile.
Quote:
Originally Posted by technot View Post

i found 1.07 to be to little with all dimms occupied. anything below 1.2 should be safe, try another bump smile.gif

Well like I said I was getting more BSODs, or so it seemed, with 1.07. So it felt like I was going in the wrong direction. I think Aesir may be on to something.

Thanks for the support everyone.
CYLONRAIDER
(16 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600K HT @ 4.6Ghz, 1.41v GIGABYTE GA-Z68XP-UD4 2 X ASUS DCII Radeon HD 6970 2GB, Crossfired Corsair Vengeance 16GB DDR3 1600Mhz 
Hard DriveHard DriveCoolingMonitor
Corsair Force Series GT 60GB SRT Caching Western Digital Velociraptor 450GB Antec KÜHLER H2O 920 w/ Scythe Gentle Typhoons 3X ASUS 21" IPS VS229H-P, Eyefinity 
KeyboardPowerCaseMouse
Logitech G15 SeaSonic 1000W 80 PLUS PLATINUM Modular Antec Lanboy Air, Red Logitech G600 
AudioAudio
Schiit BiFrost DAC+ Schiit Asgard Headphone Amp Logitech G930 
  hide details  
Reply
CYLONRAIDER
(16 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600K HT @ 4.6Ghz, 1.41v GIGABYTE GA-Z68XP-UD4 2 X ASUS DCII Radeon HD 6970 2GB, Crossfired Corsair Vengeance 16GB DDR3 1600Mhz 
Hard DriveHard DriveCoolingMonitor
Corsair Force Series GT 60GB SRT Caching Western Digital Velociraptor 450GB Antec KÜHLER H2O 920 w/ Scythe Gentle Typhoons 3X ASUS 21" IPS VS229H-P, Eyefinity 
KeyboardPowerCaseMouse
Logitech G15 SeaSonic 1000W 80 PLUS PLATINUM Modular Antec Lanboy Air, Red Logitech G600 
AudioAudio
Schiit BiFrost DAC+ Schiit Asgard Headphone Amp Logitech G930 
  hide details  
Reply
post #27 of 27
I'd try Aesir's suggestion first. And should it now help, try mine smile.gif

I actually had to run my vtt at 1.17v btw.
i7-3930K
(14 items)
 
  
CPUMotherboardGraphicsGraphics
i7-3930K 4700mhz @ 1.376v sabertooth x79 Sapphire Radeon HD 6990 4GB Sapphire Radeon HD 6990 4GB 
RAMHard DriveCoolingOS
Corsair 4x8gb @ 1600mhz Corsair Force GT 120GB Corsair h100 Windows 7 
MonitorMonitorKeyboardPower
Acer 24" BenQ 21.5" Logitech g15 Corsair HX 1050w 
CaseMouse
CM HAF X Big Logitech g9x 
  hide details  
Reply
i7-3930K
(14 items)
 
  
CPUMotherboardGraphicsGraphics
i7-3930K 4700mhz @ 1.376v sabertooth x79 Sapphire Radeon HD 6990 4GB Sapphire Radeon HD 6990 4GB 
RAMHard DriveCoolingOS
Corsair 4x8gb @ 1600mhz Corsair Force GT 120GB Corsair h100 Windows 7 
MonitorMonitorKeyboardPower
Acer 24" BenQ 21.5" Logitech g15 Corsair HX 1050w 
CaseMouse
CM HAF X Big Logitech g9x 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › 124 BSOD only with FLASH