Overclock.net › Forums › Software, Programming and Coding › Networking & Security › Celeron D can't handle Gigabit?
New Posts  All Forums:Forum Nav:

Celeron D can't handle Gigabit?

post #1 of 16
Thread Starter 
So, since my old Asus board in my server only had 100 megabit, I wanted to upgrade...I replaced my old Linksys 100 megabit card with a Gigabit Rosewill one. When transferring files, the transfer speed caps at about 46 MB/s, I look in Task Manager and the CPU usage is @ 100% The processor is a Celeron D 3.33GHz (3.33/512K/533) This seems strange because some people have told me that their server with a Pentium 3 can saturate a gigabit connection just fine. If it is my CPU, you think a 2.93/1M/533 P4 would make a difference? Or possibly a 3.0/1M/800?
Keeps me warm
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 2500K @ 4.4GHz Asus Sabertooth P67 HIS IceQ Radeon HD 7950 3GB 16GB G.Skill Ares @ 1600MHz 
Hard DriveCoolingOSMonitor
500GB Seagate + 1TB Samsung Corsair H80 Windows 7 Ultimate 64 Samsung 23" 1920x1080 
PowerCase
Thortech Thunderbolt 650W Antec 200 
  hide details  
Reply
Keeps me warm
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 2500K @ 4.4GHz Asus Sabertooth P67 HIS IceQ Radeon HD 7950 3GB 16GB G.Skill Ares @ 1600MHz 
Hard DriveCoolingOSMonitor
500GB Seagate + 1TB Samsung Corsair H80 Windows 7 Ultimate 64 Samsung 23" 1920x1080 
PowerCase
Thortech Thunderbolt 650W Antec 200 
  hide details  
Reply
post #2 of 16
Running any sort of RAID?
Das Rig, Ja?
(12 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 1700 Asus Crosshair VI EVGA 1080Ti SC2 2x16G GSkill RGB 3200 
Hard DriveCoolingOSMonitor
500 GB 960 EVO Enermax T50A-BVT Windows 10 Pro 27" Asus 
KeyboardPowerCaseMouse
Logitech K350 EVGA 1600G2 Fractal Define C Rosewill M55 RGB 
  hide details  
Reply
Das Rig, Ja?
(12 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 1700 Asus Crosshair VI EVGA 1080Ti SC2 2x16G GSkill RGB 3200 
Hard DriveCoolingOSMonitor
500 GB 960 EVO Enermax T50A-BVT Windows 10 Pro 27" Asus 
KeyboardPowerCaseMouse
Logitech K350 EVGA 1600G2 Fractal Define C Rosewill M55 RGB 
  hide details  
Reply
post #3 of 16
Celeron D's are terrible chips, unless you have a dedicated gigabit network card and not onboard it will bog down that CPU like no tomorrow. Yes I would try a P4 and see if that improve the performance.
post #4 of 16
Thread Starter 
No RAID running. Well, when the onboard ethernet is sending 12MB/s the CPU usage goes to around 35% If you do the math that sounds about right going to 100% usage @ 46MB/s. I know the Celeron D's are pretty bad, that's why it's in a file server tongue.gif
Keeps me warm
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 2500K @ 4.4GHz Asus Sabertooth P67 HIS IceQ Radeon HD 7950 3GB 16GB G.Skill Ares @ 1600MHz 
Hard DriveCoolingOSMonitor
500GB Seagate + 1TB Samsung Corsair H80 Windows 7 Ultimate 64 Samsung 23" 1920x1080 
PowerCase
Thortech Thunderbolt 650W Antec 200 
  hide details  
Reply
Keeps me warm
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 2500K @ 4.4GHz Asus Sabertooth P67 HIS IceQ Radeon HD 7950 3GB 16GB G.Skill Ares @ 1600MHz 
Hard DriveCoolingOSMonitor
500GB Seagate + 1TB Samsung Corsair H80 Windows 7 Ultimate 64 Samsung 23" 1920x1080 
PowerCase
Thortech Thunderbolt 650W Antec 200 
  hide details  
Reply
post #5 of 16
Me thinks it's the NIC offloading all the work to the CPU.

I have a P3 1Ghz system that has no issues hitting 80-90MB/Sec. The NIC I use is a Intel Pro 1000 MT.
    
CPUMotherboardGraphicsRAM
Intel Overdrive 486DX4 100Mhz Digital Venturis 466 S3 Trio 32 1MB 68MB 72 Pin SIMMs 
Hard DriveOptical DriveOSMonitor
1.2Gb & 270Mb 32X CD-ROM Windows 98 SE LG 23" Flatron 
KeyboardPowerCaseMouse
Microsoft PS/2 Lite-On Digital Venturis 466 Logitech PS/2 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Overdrive 486DX4 100Mhz Digital Venturis 466 S3 Trio 32 1MB 68MB 72 Pin SIMMs 
Hard DriveOptical DriveOSMonitor
1.2Gb & 270Mb 32X CD-ROM Windows 98 SE LG 23" Flatron 
KeyboardPowerCaseMouse
Microsoft PS/2 Lite-On Digital Venturis 466 Logitech PS/2 
  hide details  
Reply
post #6 of 16
Thread Starter 
Quote:
Originally Posted by killabytes View Post

Me thinks it's the NIC offloading all the work to the CPU.
I have a P3 1Ghz system that has no issues hitting 80-90MB/Sec. The NIC I use is a Intel Pro 1000 MT.

Hmmmm, is there any way around this? It's running Windows Server 2003
Keeps me warm
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 2500K @ 4.4GHz Asus Sabertooth P67 HIS IceQ Radeon HD 7950 3GB 16GB G.Skill Ares @ 1600MHz 
Hard DriveCoolingOSMonitor
500GB Seagate + 1TB Samsung Corsair H80 Windows 7 Ultimate 64 Samsung 23" 1920x1080 
PowerCase
Thortech Thunderbolt 650W Antec 200 
  hide details  
Reply
Keeps me warm
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 2500K @ 4.4GHz Asus Sabertooth P67 HIS IceQ Radeon HD 7950 3GB 16GB G.Skill Ares @ 1600MHz 
Hard DriveCoolingOSMonitor
500GB Seagate + 1TB Samsung Corsair H80 Windows 7 Ultimate 64 Samsung 23" 1920x1080 
PowerCase
Thortech Thunderbolt 650W Antec 200 
  hide details  
Reply
post #7 of 16
What chipset does the NIC use?
SG06
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-3570S 65W ASRock Z77E-ITX VisionTek AMD Radeon RX 480 8GB Reference G.SKILL Sniper DDR3-2400 (@ 1866 9-10-10-28) 2x8GB 
Hard DriveHard DriveCoolingCooling
Crucial m4 256GB Toshiba P300 3TB Prolimatech Samuel 17 Noctua NF-F12 
OSMonitorMonitorKeyboard
Windows 10 Pro x64 HP Omen 32" HP Pavilion 27xi Das Model S Professional Silent 
PowerCaseMouseAudio
Silverstone SST-ST45SF Silverstone SG06 Microsoft Intellimouse Realtek ALC898 
  hide details  
Reply
SG06
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-3570S 65W ASRock Z77E-ITX VisionTek AMD Radeon RX 480 8GB Reference G.SKILL Sniper DDR3-2400 (@ 1866 9-10-10-28) 2x8GB 
Hard DriveHard DriveCoolingCooling
Crucial m4 256GB Toshiba P300 3TB Prolimatech Samuel 17 Noctua NF-F12 
OSMonitorMonitorKeyboard
Windows 10 Pro x64 HP Omen 32" HP Pavilion 27xi Das Model S Professional Silent 
PowerCaseMouseAudio
Silverstone SST-ST45SF Silverstone SG06 Microsoft Intellimouse Realtek ALC898 
  hide details  
Reply
post #8 of 16
My Opteron 1214 at 3GHz used to show serious sluggishness issues when pumping files at full speed throughout the dual Gigabit LAN on my M2N-SLi Deluxe (Hard drives were at around 90% of their theoretical sequential reading speeds). Transfer speeds were effectively reaching 100MB/s on both outputs, but at a very high cost. Windows was barely usable.

My guess is that you'll need a dedicated Gigabit controller that includes a processor to avoid the NIC handing out the work to the processor.
   
AGP bencher
(14 items)
 
CPUMotherboardGraphicsRAM
Ryzen R7 1700 Gigabyte GA-AX370-Gaming 5 Sapphire HD 6950 2GiB 2x8GB KFA2 HOF DDR4-3600 
Hard DriveHard DriveHard DriveHard Drive
Crucial MX100 256GB Seagate 600 Series 240GB Seagate 7200.14 2TB Samsung F3 1TB 
CoolingCoolingCoolingCooling
EKWB Supreme HF XSPC Rasa GPU EK XT360 EK 4.0 
OSMonitorMonitorKeyboard
W10 Pro LG IPS235 LG E2250V KUL ES-87 
PowerCaseMouseAudio
SF Leadex II 650W Lian Li PC-A05NB Logitech G9 Xonar DX 
AudioAudio
SMSL SA-S3+Technics CB-250 Sennheiser HD555 
CPUMotherboardRAMHard Drive
AMD A10-5700 Gigabyte F2A75M-HD2 G.SKILL Ares 2133 CL9 Hitachi 5K750 
Hard DriveCoolingOSMonitor
Momentus .7 200GB Noctua NH-L9a Server 2012 R2 Standard AUO B156HW01 
PowerCaseOther
PicoPSU-80-WI-25V AIO Aluminium Handmade TP-Link Archer Something Something Wi-Fi AC 
CPUCPUCPUMotherboard
Core2Duo E6400 Core2Quad Q6600 Pentium Dual Core E5200 AsRock 4COREDUAL-SATA2 R2.0 
GraphicsRAMHard DriveOptical Drive
A dumpload of ancient AGP cards Kingston Value DDR2-667 CL4 2T @CL3 1T Seagate 160GB 7200.10 LG IDE DVD-ROM 
CoolingCoolingOSMonitor
Ghettomade CPU waterblock 49cc 2stroke engine copper radiator WinXP SP2 32bit ProView 17" 
PowerCase
Tacens Radix V 550W Ghetto aluminium bench 
  hide details  
Reply
   
AGP bencher
(14 items)
 
CPUMotherboardGraphicsRAM
Ryzen R7 1700 Gigabyte GA-AX370-Gaming 5 Sapphire HD 6950 2GiB 2x8GB KFA2 HOF DDR4-3600 
Hard DriveHard DriveHard DriveHard Drive
Crucial MX100 256GB Seagate 600 Series 240GB Seagate 7200.14 2TB Samsung F3 1TB 
CoolingCoolingCoolingCooling
EKWB Supreme HF XSPC Rasa GPU EK XT360 EK 4.0 
OSMonitorMonitorKeyboard
W10 Pro LG IPS235 LG E2250V KUL ES-87 
PowerCaseMouseAudio
SF Leadex II 650W Lian Li PC-A05NB Logitech G9 Xonar DX 
AudioAudio
SMSL SA-S3+Technics CB-250 Sennheiser HD555 
CPUMotherboardRAMHard Drive
AMD A10-5700 Gigabyte F2A75M-HD2 G.SKILL Ares 2133 CL9 Hitachi 5K750 
Hard DriveCoolingOSMonitor
Momentus .7 200GB Noctua NH-L9a Server 2012 R2 Standard AUO B156HW01 
PowerCaseOther
PicoPSU-80-WI-25V AIO Aluminium Handmade TP-Link Archer Something Something Wi-Fi AC 
CPUCPUCPUMotherboard
Core2Duo E6400 Core2Quad Q6600 Pentium Dual Core E5200 AsRock 4COREDUAL-SATA2 R2.0 
GraphicsRAMHard DriveOptical Drive
A dumpload of ancient AGP cards Kingston Value DDR2-667 CL4 2T @CL3 1T Seagate 160GB 7200.10 LG IDE DVD-ROM 
CoolingCoolingOSMonitor
Ghettomade CPU waterblock 49cc 2stroke engine copper radiator WinXP SP2 32bit ProView 17" 
PowerCase
Tacens Radix V 550W Ghetto aluminium bench 
  hide details  
Reply
post #9 of 16
Thread Starter 
The chipset is a Realtek RTL8169/8110. Get a new one? Well that sucks lol. What are the chances that the P4 will be able to handle it a lot better? Pretty much the only difference is the bigger cache

Edit: Okay, So I found this interesting....When moving something FROM my server to my sig rig, it caps at 50MB/s but the Celeron D is only at 45% CPU usage, but when I move something TO my server, the speed caps at 50MB/s and CPU usage is at 100% I find that strange
Edited by Pentium-David - 12/15/11 at 3:09pm
Keeps me warm
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 2500K @ 4.4GHz Asus Sabertooth P67 HIS IceQ Radeon HD 7950 3GB 16GB G.Skill Ares @ 1600MHz 
Hard DriveCoolingOSMonitor
500GB Seagate + 1TB Samsung Corsair H80 Windows 7 Ultimate 64 Samsung 23" 1920x1080 
PowerCase
Thortech Thunderbolt 650W Antec 200 
  hide details  
Reply
Keeps me warm
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 2500K @ 4.4GHz Asus Sabertooth P67 HIS IceQ Radeon HD 7950 3GB 16GB G.Skill Ares @ 1600MHz 
Hard DriveCoolingOSMonitor
500GB Seagate + 1TB Samsung Corsair H80 Windows 7 Ultimate 64 Samsung 23" 1920x1080 
PowerCase
Thortech Thunderbolt 650W Antec 200 
  hide details  
Reply
post #10 of 16
Thread Starter 
Anyone else have an idea? Cause I'm lazy and don't wanna switch procs tongue.gif but if no one else has any ideas then I will biggrin.gif
Keeps me warm
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 2500K @ 4.4GHz Asus Sabertooth P67 HIS IceQ Radeon HD 7950 3GB 16GB G.Skill Ares @ 1600MHz 
Hard DriveCoolingOSMonitor
500GB Seagate + 1TB Samsung Corsair H80 Windows 7 Ultimate 64 Samsung 23" 1920x1080 
PowerCase
Thortech Thunderbolt 650W Antec 200 
  hide details  
Reply
Keeps me warm
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 2500K @ 4.4GHz Asus Sabertooth P67 HIS IceQ Radeon HD 7950 3GB 16GB G.Skill Ares @ 1600MHz 
Hard DriveCoolingOSMonitor
500GB Seagate + 1TB Samsung Corsair H80 Windows 7 Ultimate 64 Samsung 23" 1920x1080 
PowerCase
Thortech Thunderbolt 650W Antec 200 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Networking & Security
Overclock.net › Forums › Software, Programming and Coding › Networking & Security › Celeron D can't handle Gigabit?