Ok newest Updates I am now clearcoating and hopefully cutting the Plexi tonight for my window.And then getting ready to drain the system and tear it all back apart again.heres some Photos of Clear Coating the front door and i added a few Pictures showing my tiny spray booth i made for Spraying outside.I add a de humidifier and small heater in the little booth before painting.Its so small i have to paint kneeling down.I also add to spotlights inside so i can see how the paint is laying on.
Here's The Photos. Hope you like Them:
Here's the tiny paint booth i paint in (Its kinda funny but works well) Also the shed i do all my work out of .Its crammed full of stuff including Powder coating setup,Compressor,Sandblasting station, Grining wheel,Welder and other stuff like that.I dont get much room to work.But if thats what it takes to be able to Mod then that's what i have to do.
The Gloss Clear coat Lacquer and Gun i used for this job. (Added an extra air filter equaling 4 do to the weather)
Here's the front door before clear coat. All the black snake and Venom name is Paint not a sticker!
Only shot of me actually Painting.I dont trust the camera in there with the paint mist everywhere.What i am doing in the Photo is laying down a very light mist coat of clear.I let that tack up a little and then start laying down medium coats.I will probally lay down 7 coats on this door then knock it down by wetsanding and buffing.That will give the Glass like effect when you look at it will feel smooth as glass after buffing and polishing :
AND HERE'S ME BEING A GOOF BALL!
Will post more photos when its finished!Edited by mybadomen - 1/13/12 at 3:26pm