Project Venom - NZXT Phantom Build - Page 16

Yeah i am just going to keep saving and maby the 7990 will be out by the time i have the money. 7970 is great but not sure if its almost $1000. great once i add a water block and ram plate.I stare at Venom all night right now thinking about making some huge changes in the Modding the case section but really not sure what to do to be Honest.

He he i worked so hard on that lettering .That's all Painted on with a HVLP Spray gun.And thank you for the Compliment.The Venom and snake are because all the fans are Viper's and they all have snake heads on them so i named it Venom.

No a 7970 roughly 650. plus shipping for the card 169. for the water block and and 37.99 for the ram plate plus shipping from 2 different places.Not to mention the fittings are 20 bucks each.

Or a 6990 for roughly 600.used with a water block installed already.

The 6970 im my Build is now listed For Sale in The Market Place.Great Card i just want to upgrade.

Here is a 3dmark06 run i just ran just now.


Edited by mybadomen - 1/20/12 at 2:28pm

Only do to later adding a second 6990 for quad crossfire.Pretty sure i am going 7970 at this point.At least thats what i am saving for.But that could change any time.
and sorry can get the block for 129.99 without a ram plate though plus shipping .i just looked it up.
Edited by mybadomen - 1/20/12 at 4:34pm

Just wanted to post some more Shots since tomorrows the big Day for Mod of the Month contest .please vote if you like it. I worked very hard on it as can be seen in this Log.And did it all out of my own pocket which isn't very big. Also all the modding was done by me besides the Masking I used for painting the name and Logo. Credit for that goes to OCN member named Kaged!

Specs:
Intel i7-2700k @ 5ghz 8 threads 24/7
AsRock Fatal1ty Pro Z68 Gen3
Powercolor (Reference) HD6970 2gig
4 Gigs Corsair Dominator GT's 1.5v C9 @. 2136 MHz 9.11.9.27 1T
2 Vertex3 SSD's raid 0 @ over 1000mbs
Cougar Sx1050 Painted and Fully Sleeved( no extensions)
Case: Modded NZXT Phantom including many mods.(removed HDD cages/Completly redesigned 5.25 bays even had to do some welding/made rear plate to cover all open area's of the rear of the case/ made plate and brackets to mount hidden 2Tb WD Black HDD/made custom easily removable plates to mount SSD drives and EK 8 port Res./Complete custom paint done by me with a HVLP gun Base coat , clear coat Lacquer Auto paint. Also wet sanded and buffed out to have an amazing finish./made custom harnessed/ made and sleeved 2 Led Strips./rewired Antec Veris to get rid of the big motherboard adapter that comes with it. But made it so it will still power the Pc on or off by remote. There is even way more mods then this in Venom and I paid attention to every detail.

Cooling:
Rs 360 up top push/pull
Magicool Extreme 240 bottom Push/pull
XSPC res/pump Combo
XSPC CPu Block
10 Asaka Viper 120 Fans @ 86 CFM
1 Asaka Viper 140 Fan @ 110 CFM
EK Nickel HD6970 Block
EK Black Gpu Ram plate
EK Nickel Dominator Ram Block
EK 8 Port Res.
10' Primochill Primoflex pro Tubing Black 1/2ID x 3/4OD
7 Bitspower Nickel Compression fittings .
3 Bitspower Nickel rotary 45 degree compression fittings
3 Bitspower Nickel 90 degree Rotary snake fittings.
Modded stock Fan controller with white LED's( was very difficult )
1/2 Gallon Distilled Water
3 drops Dead Water Biocide
Silver Coil added inside Res.

That's all I can think of at the moment.More plans ahead for Venom but this is the finished point for the Mod of the Month Contest.

Wish i was a better photographer but i did my best using an iPhone for these photos.(I wish you guys could see it up close)The paint job is immaculate Glass like Finish.

I hope you enjoy these and please do vote tomorrow if you do.

BEFORE:





AFTER:



























































Dont forget my new little buddy that was born during this Build! (Sugar Glider)



Thank you guys for all the support while building Venom.now I need your support the most. Vote on it in the Mod of the Month contest,but only if you think it deserves it.

Contest is here and Voting i believe begins tomorrow the 22nd or January 2012 : http://www.overclock.net/t/1184204/january-2012-mod-of-the-month-contest-nominations-open-until-january-22nd

Thanks, MybadOmen
Edited by mybadomen - 1/23/12 at 6:05am