Overclock.net › Forums › AMD › AMD CPUs › AMD FX CPU Overclock: Post your settings here
New Posts  All Forums:Forum Nav:

AMD FX CPU Overclock: Post your settings here

post #1 of 2
Thread Starter 
Just thought we should have a place for everyone with an FX processor to post the settings for their stable 24/7 overclock. We should list the following to help others.

CPU type
MB type and Bios rev
Memory(type/amount and speed)
CPU FSB/Multiplier
CPU/NB speed
HTT speed

Voltages:

Vcore
CPU/NB
DRAM
HTT
NB
VDDA

Other settings:

CPU LLC
CPU/NB LLC
CPU Current Capability
CPU/NB Current Capability
CPU Power Phase Control
CPU Voltage Frequency
post #2 of 2
FX 6100 Zambezi
Asus M5A78L-M/USB3 0801
8GB Corsair XM3 1333mhz (@1180mhz)
CPU: 221mhz x 19 / 4199mhz
CPU/NB: 2210Mhz (board default 2000)
HTT: 2210 Mhz

Voltages:

Vcore 1.375v
CPU/NB 1.25v
DRAM 1.5v
HTT (auto)
NB (auto)
VDDA (auto)

CPU LLC: 35% (Default 48% - Most important factor in stability on this board imo = changed Vdroop under load from 0.05-0.06 to a steady 0.02)
CPU/NB LLC: N/A
CPU Current Capability: N/A
CPU/NB Current Capability: N/A
CPU Power Phase Control: N/A
CPU Voltage Frequency: N/A

This stands up to 30 min Prime95s so far. Need to schedule a longer run I expect. Running normally without any probs.

I invite criticisms heartily. I've read and seen data to suggest that the NB is not as important to overclocking with Bulldozers, but rather, the most important change is that some clocking is done from the FSB, I may increase mine, just not sure how far I should push it.

It's possible that extra voltage on the CPU NB even if not massively overclocking helps stability. Dropping from 1.25 to 1.225 seemed to cost me stability.
Edited by IPFreely - 12/18/11 at 4:57pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › AMD FX CPU Overclock: Post your settings here