Overclock.net › Forums › AMD › AMD CPUs › FX8120 4.5ghz 15hrs prime95 stable but get BSOD 0x0D1 while gamming?
New Posts  All Forums:Forum Nav:

FX8120 4.5ghz 15hrs prime95 stable but get BSOD 0x0D1 while gamming? - Page 3

post #21 of 113
my bad, if anything the info may help the op out.
μRyzen
(12 items)
 
Mini Box
(4 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen R5 1400 MSI B350M Gaming Pro Zotac GTX 670 4GB G.SKILL FORTIS Series 8GB (2 x 4GB) 
Hard DriveCoolingOSOS
WD Green 3tb Wraith Stealth Windows 10 Debian 8.7 
MonitorKeyboardPowerMouse
ViewSonic VX-2257-8 Chinese backlit mechanical Kingwin 850w Chinese laser optical 
CPUMotherboardGraphicsRAM
Athlon 5350 Asus AM1I-A EVGA GTX 750 Ti SC 2x4GB DDR 3 1333 
  hide details  
Reply
μRyzen
(12 items)
 
Mini Box
(4 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen R5 1400 MSI B350M Gaming Pro Zotac GTX 670 4GB G.SKILL FORTIS Series 8GB (2 x 4GB) 
Hard DriveCoolingOSOS
WD Green 3tb Wraith Stealth Windows 10 Debian 8.7 
MonitorKeyboardPowerMouse
ViewSonic VX-2257-8 Chinese backlit mechanical Kingwin 850w Chinese laser optical 
CPUMotherboardGraphicsRAM
Athlon 5350 Asus AM1I-A EVGA GTX 750 Ti SC 2x4GB DDR 3 1333 
  hide details  
Reply
post #22 of 113
Thread Starter 
Quote:
Originally Posted by computerparts View Post

OP check your LLC setings. I had 1.45v in bios on 4.6 ghz but wasn't stable until I enabled LLC.

LLC is set to extreme. 1.375v gives me 1.428v load
Quote:
Originally Posted by KarathKasun View Post

my fx-4100 needs ~1.475 for 4.6ghz and ~1.45v for 4.5ghz.

So far, mine FX8120 need 1.428v (1.375v+LLC extreme) for 4.5ghz



Quote:
Originally Posted by ocmi_teddy View Post

Quote:
Originally Posted by Tslm View Post

Uhh 1.5-1.55v is way more than needed for FX chips at 4.5. Probably is memory related OP

agreed, everything looks fine for your cpu. What error are you BSODing? and which prime test did you run?

BSOD code D1

I ran a custom test with FFT starting at 1024k and ending at 4096k for 15 hours with 14712MB memory.

But after that core #7 failed prime95 with just blend test using 1600mb memory. Wierd.
post #23 of 113
Thread Starter 
Quote:
Originally Posted by KarathKasun View Post

my bad, if anything the info may help the op out.

Can you go higher? Or temps stop you?
post #24 of 113
I can get 4.8 with 1.5v (1.6v LLC) temps are definately a limiting factor at those settings though. I see 65c and higher with a decent air cooler @ 4.8.

My chip is definately not a good overclocker though.

Cant give definitive results for the other FX-4100 build Ive done, as its on stock cooling. It can do 4ghz on the crappy stock FX-4100 cooler.
Edited by KarathKasun - 12/23/11 at 12:41pm
μRyzen
(12 items)
 
Mini Box
(4 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen R5 1400 MSI B350M Gaming Pro Zotac GTX 670 4GB G.SKILL FORTIS Series 8GB (2 x 4GB) 
Hard DriveCoolingOSOS
WD Green 3tb Wraith Stealth Windows 10 Debian 8.7 
MonitorKeyboardPowerMouse
ViewSonic VX-2257-8 Chinese backlit mechanical Kingwin 850w Chinese laser optical 
CPUMotherboardGraphicsRAM
Athlon 5350 Asus AM1I-A EVGA GTX 750 Ti SC 2x4GB DDR 3 1333 
  hide details  
Reply
μRyzen
(12 items)
 
Mini Box
(4 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen R5 1400 MSI B350M Gaming Pro Zotac GTX 670 4GB G.SKILL FORTIS Series 8GB (2 x 4GB) 
Hard DriveCoolingOSOS
WD Green 3tb Wraith Stealth Windows 10 Debian 8.7 
MonitorKeyboardPowerMouse
ViewSonic VX-2257-8 Chinese backlit mechanical Kingwin 850w Chinese laser optical 
CPUMotherboardGraphicsRAM
Athlon 5350 Asus AM1I-A EVGA GTX 750 Ti SC 2x4GB DDR 3 1333 
  hide details  
Reply
post #25 of 113
Thread Starter 
So most recent update:

Target Clock speed: 4500 mhz.
Target cpu/nb speed: 2200mhz
Target ht link speed: 2200mhz
Target Ram 1866mhz 9-10-9-28-42-2T

Vcore: 1,375v + LLC extreme
Vcpu/nb 1.3v + LLC extreme
Vram 1.525v


Result: after 3hrs 30min prime95 blend test --> BSOD 0x0D1.

Think I would like to know is, should i raise the CPU/NB voltage or DRAM voltage, or both?
post #26 of 113
Bump the vcore.

I only need 1.275v CPU-NB for 4.6ghz/2200 NB.
The only time I need 1.3v on the CPU-NB is when I push it to 2400-2600
VDDR hasnt affected my clocks at all.
Edited by KarathKasun - 12/23/11 at 4:17pm
μRyzen
(12 items)
 
Mini Box
(4 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen R5 1400 MSI B350M Gaming Pro Zotac GTX 670 4GB G.SKILL FORTIS Series 8GB (2 x 4GB) 
Hard DriveCoolingOSOS
WD Green 3tb Wraith Stealth Windows 10 Debian 8.7 
MonitorKeyboardPowerMouse
ViewSonic VX-2257-8 Chinese backlit mechanical Kingwin 850w Chinese laser optical 
CPUMotherboardGraphicsRAM
Athlon 5350 Asus AM1I-A EVGA GTX 750 Ti SC 2x4GB DDR 3 1333 
  hide details  
Reply
μRyzen
(12 items)
 
Mini Box
(4 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen R5 1400 MSI B350M Gaming Pro Zotac GTX 670 4GB G.SKILL FORTIS Series 8GB (2 x 4GB) 
Hard DriveCoolingOSOS
WD Green 3tb Wraith Stealth Windows 10 Debian 8.7 
MonitorKeyboardPowerMouse
ViewSonic VX-2257-8 Chinese backlit mechanical Kingwin 850w Chinese laser optical 
CPUMotherboardGraphicsRAM
Athlon 5350 Asus AM1I-A EVGA GTX 750 Ti SC 2x4GB DDR 3 1333 
  hide details  
Reply
post #27 of 113
Thread Starter 
If this run of blend also fails i'll bump the Vcore

From what I experienced Code D1 is IMC /memoruy
post #28 of 113
Bluescreen codes mean nothing when ocing. They will only point you to what thread is crapping out. (IE if your experience is with Ph2 cpu's, the same codes wont apply to FX cpu's)

Its better to do detailed subsystem tests before pinning it down to mem or cpu-nb voltages.

I start with cpu stock, mem stock, and bumping the cpu-nb to max stable.
Then only cpu core to max stable.
Followed by only max mem stable.

Then combine the overclocks and pinpoint issues with that, otherwise you have too many unknowns and glitches to track down.

The only voltage that seems out of the normal bounds for 4.5ghz is the Vcore. While CPU-NB is a bit high, it shouldnt affect stability other than pushing temps up.

Also, make sure that your BIOS is absolutely up to date or at least a known stable revision.
Edited by KarathKasun - 12/23/11 at 5:10pm
μRyzen
(12 items)
 
Mini Box
(4 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen R5 1400 MSI B350M Gaming Pro Zotac GTX 670 4GB G.SKILL FORTIS Series 8GB (2 x 4GB) 
Hard DriveCoolingOSOS
WD Green 3tb Wraith Stealth Windows 10 Debian 8.7 
MonitorKeyboardPowerMouse
ViewSonic VX-2257-8 Chinese backlit mechanical Kingwin 850w Chinese laser optical 
CPUMotherboardGraphicsRAM
Athlon 5350 Asus AM1I-A EVGA GTX 750 Ti SC 2x4GB DDR 3 1333 
  hide details  
Reply
μRyzen
(12 items)
 
Mini Box
(4 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen R5 1400 MSI B350M Gaming Pro Zotac GTX 670 4GB G.SKILL FORTIS Series 8GB (2 x 4GB) 
Hard DriveCoolingOSOS
WD Green 3tb Wraith Stealth Windows 10 Debian 8.7 
MonitorKeyboardPowerMouse
ViewSonic VX-2257-8 Chinese backlit mechanical Kingwin 850w Chinese laser optical 
CPUMotherboardGraphicsRAM
Athlon 5350 Asus AM1I-A EVGA GTX 750 Ti SC 2x4GB DDR 3 1333 
  hide details  
Reply
post #29 of 113
Thread Starter 
Quote:
Originally Posted by KarathKasun View Post

Bluescreen codes mean nothing when ocing. They will only point you to what thread is crapping out. (IE if your experience is with Ph2 cpu's, the same codes wont apply to FX cpu's)
Its better to do detailed subsystem tests before pinning it down to mem or cpu-nb voltages.
I start with cpu stock, mem stock, and bumping the cpu-nb to max stable.
Then only cpu core to max stable.
Followed by only max mem stable.
Then combine the overclocks and pinpoint issues with that, otherwise you have too many unknowns and glitches to track down.
The only voltage that seems out of the normal bounds for 4.5ghz is the Vcore. While CPU-NB is a bit high, it shouldnt affect stability other than pushing temps up.
Also, make sure that your BIOS is absolutely up to date or at least a known stable revision.

My experienced came from OC'ing this cpu my first bulldozer, but it seems not to be true that 0x0D1 is IMC/memory, i just got a new bsod just under 2 hours.

And I am doing a detailed subsystem test, starting with the Cpu clock, everything else IS at stock, but the cpu/nb voltage which is 1.275v now instead of 1.2v.

The only variable i have is the cpu clock.

Tonight when i go to sleep all try another setting, 4.5ghz @ 1.4v + LLC extreme
The rest is at stock, only raised the cpu/nb voltage to 1.275v due to 16gb ram.

I'm using BIOS 1003. The lastest.
post #30 of 113
Your 12 volt is pretty low. Wonder if that has anything to do with it...
2nd Rig
(17 items)
 
  
CPUMotherboardGraphicsRAM
[Intel] 2500k [4.5ghz] [1.3 volts] [AsRock] P67 Extreme 6 [Sapphire] 6950 Toxic (@ Stock) [Samsung] Low voltage memory [@1866 mHz 9-9-9-24] 
Hard DriveOptical DriveCoolingOS
[Corsair] 120gb Force GT Some Lite-On thing [Coolermaster] V8 Winders 
MonitorKeyboardPowerCase
[Gateway] FDH2402 [CM Storm] QuickFire TK [XFX] Core Edition PRO850W [In Win] Dragon Rider 
MouseAudioAudioAudio
[CM Storm] Sentinel Advance II [AUDIOTRAK] Prodigy HD2 ADVANCE DE [Polk Audio] PSW 505 and Monitor 40's Denon AVR-791 
Audio
Infinity P153's 
  hide details  
Reply
2nd Rig
(17 items)
 
  
CPUMotherboardGraphicsRAM
[Intel] 2500k [4.5ghz] [1.3 volts] [AsRock] P67 Extreme 6 [Sapphire] 6950 Toxic (@ Stock) [Samsung] Low voltage memory [@1866 mHz 9-9-9-24] 
Hard DriveOptical DriveCoolingOS
[Corsair] 120gb Force GT Some Lite-On thing [Coolermaster] V8 Winders 
MonitorKeyboardPowerCase
[Gateway] FDH2402 [CM Storm] QuickFire TK [XFX] Core Edition PRO850W [In Win] Dragon Rider 
MouseAudioAudioAudio
[CM Storm] Sentinel Advance II [AUDIOTRAK] Prodigy HD2 ADVANCE DE [Polk Audio] PSW 505 and Monitor 40's Denon AVR-791 
Audio
Infinity P153's 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
  • FX8120 4.5ghz 15hrs prime95 stable but get BSOD 0x0D1 while gamming?
Overclock.net › Forums › AMD › AMD CPUs › FX8120 4.5ghz 15hrs prime95 stable but get BSOD 0x0D1 while gamming?