Overclock.net › Forums › Cooling › Water Cooling › Proposing a new loop I've never done before...will it work?
New Posts  All Forums:Forum Nav:

Proposing a new loop I've never done before...will it work? - Page 2

post #11 of 20
You want positive pressure after your pump and running that through the res would diminish that. plus if any air bubbles run through that pump youll damage it. least likeliness of that is by having it at the bottom most part of the loop and after the res.

I needlessly watercool my ram as well, Im one of those people. Its been shown that my particular ram does no better under water vs. by air. I just wanna "bling" out my system. I felt I deserved it smile.gif
Edited by XiDillon - 12/23/11 at 6:56pm
post #12 of 20
If your res is right after your pump, it would have to be full and pushing through the tubes in order to get pressure, wouldn't it? That's kinda weird. I'm used to seeing 3/4 full res feeding the pump
Jermzz
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 3930k ASUS Rampage IV Extreme EVGA GTX 580 32 GB Corsair Dominator 1866 CL9 
Hard DriveCoolingOSMonitor
2x Corsair Force GT 120 RAID 0 water cooled Win 7 Ultimate x64 HP w24 
PowerCaseMouse
AX1200 Modded Reverse ATX TJ07 Lachesis 
  hide details  
Reply
Jermzz
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 3930k ASUS Rampage IV Extreme EVGA GTX 580 32 GB Corsair Dominator 1866 CL9 
Hard DriveCoolingOSMonitor
2x Corsair Force GT 120 RAID 0 water cooled Win 7 Ultimate x64 HP w24 
PowerCaseMouse
AX1200 Modded Reverse ATX TJ07 Lachesis 
  hide details  
Reply
post #13 of 20
All of the water pushing power from your pump would be wasted going into the reservoir, you want all of your pumping power pushing through your other components. It would also take to long for the water to circle around through your loop back to your pump, by this time your pump would be without any water when bleeding it! Also I've heard that the VRMs on the Sandy Bridge E get very hot when overclocking, that would be the only reason to cool your mobo components!
post #14 of 20
Thread Starter 
Quote:
Originally Posted by Los Hog View Post

He is cooling the ram for bling only

Thanks for clarifying. I was just about to tell these people that. lol

Ok guys, thanks so much for the help. I guess I will have my res feed the pump as I usually always do.

Incase anybody was wondering (other than Systemlord, lol), here's the current build I'm referring to: http://www.overclock.net/t/1180285/build-work-log-murderbox-inspired-tj07-underwater

And incase anybody was wondering (again, other than Systemlord), here's my previous build: http://www.overclock.net/t/1162029/koolance-600t-captain-americas-frozen-tomb-the-final-cut
     
CPUMotherboardGraphicsRAM
Intel Core i7-3930K ASUS Rampage IV Extreme Diamond Radeon HD 6970 Corsair Vengeance 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Agility 3 OCZ Agility 3 WD Caviar Black Asus External CD/DVD RW 
CoolingOSMonitorPower
Custom Setup Windows 7 Professional Dell ST2220L x3 Corsair AX850 
Case
Silverstone TJ07 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K P8Z68 DELUXE NVIDIA GeForce GTX 580 NVIDIA GeForce GTX 580 
RAMHard DriveHard DriveHard Drive
Corsair Vengeance OCZ Agility 3 SSD (Raid 0) OCZ Agility 3 SSD (Raid 0) Western Digital Caviar Black HDD 
Optical DriveCoolingCoolingOS
External ASUS CD/DVD-RW Drive Custom Koolance Liquid Cooling Bitspower Galaxy Freezer Liquid Cooling Windows 7 Pro - 64 bit 
MonitorKeyboardPowerCase
3x Dell ST2220L LED Monitors Logitech Wireless Corsair AX1200 Corsair 600T 
Mouse
Cyborg R.A.T. 9 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Core i7-3930K ASUS Rampage IV Extreme Diamond Radeon HD 6970 Corsair Vengeance 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Agility 3 OCZ Agility 3 WD Caviar Black Asus External CD/DVD RW 
CoolingOSMonitorPower
Custom Setup Windows 7 Professional Dell ST2220L x3 Corsair AX850 
Case
Silverstone TJ07 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K P8Z68 DELUXE NVIDIA GeForce GTX 580 NVIDIA GeForce GTX 580 
RAMHard DriveHard DriveHard Drive
Corsair Vengeance OCZ Agility 3 SSD (Raid 0) OCZ Agility 3 SSD (Raid 0) Western Digital Caviar Black HDD 
Optical DriveCoolingCoolingOS
External ASUS CD/DVD-RW Drive Custom Koolance Liquid Cooling Bitspower Galaxy Freezer Liquid Cooling Windows 7 Pro - 64 bit 
MonitorKeyboardPowerCase
3x Dell ST2220L LED Monitors Logitech Wireless Corsair AX1200 Corsair 600T 
Mouse
Cyborg R.A.T. 9 
  hide details  
Reply
post #15 of 20
Quote:
Originally Posted by XiDillon View Post

.

I needlessly watercool my ram as well, Im one of those people. Its been shown that my particular ram does no better under water vs. by air. I just wanna "bling" out my system. I felt I deserved it smile.gif
Same here. I like the way it looks to... but really thought I needed it since I didn't want to use the noisy airflow fans. Oh well, I still like it, and I would still buy it for the bling factor.smile.gif
    
CPUMotherboardGraphicsRAM
[Intel] i7 4930K [ASUS] Rampage IV Black Edition [EVGA] 3x GTX 780 SC tri-SLI [Corsair] Dominator Platinum 4x4GB 2133 1.5v 
Hard DriveHard DriveHard DriveOptical Drive
[Crucial] M4 SSD 128gb [Samsung] 840 Pro 256gb [WD] Caviar Black 2TB [LG] CD/DVD/Blu-Ray Black 
CoolingCoolingCoolingOS
[Custom WC Radiators] 360 + 240 + 120 [EK] 3x EK-FC GTX Titan/780 c/p + BP [EK] Supremacy Clean CSO c/p (CPU) [Microsoft] Windows 8.1 Pro 64 
MonitorKeyboardPowerCase
[BenQ] 3x XL2420T 120hz [Filco] tenkeyless cherry mx blue [Corsair] AX1200i [Corsair] 800D 
MouseAudioAudioOther
[Logitech] G700s [Creative] Sound Blaster Recon3D Fatal1ty Profe... [Corsair] SP2500 2.1 PC Speaker System [NVIDIA] 3D Vision 2 Wireless Glasses Kit 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
[Intel] i7 4930K [ASUS] Rampage IV Black Edition [EVGA] 3x GTX 780 SC tri-SLI [Corsair] Dominator Platinum 4x4GB 2133 1.5v 
Hard DriveHard DriveHard DriveOptical Drive
[Crucial] M4 SSD 128gb [Samsung] 840 Pro 256gb [WD] Caviar Black 2TB [LG] CD/DVD/Blu-Ray Black 
CoolingCoolingCoolingOS
[Custom WC Radiators] 360 + 240 + 120 [EK] 3x EK-FC GTX Titan/780 c/p + BP [EK] Supremacy Clean CSO c/p (CPU) [Microsoft] Windows 8.1 Pro 64 
MonitorKeyboardPowerCase
[BenQ] 3x XL2420T 120hz [Filco] tenkeyless cherry mx blue [Corsair] AX1200i [Corsair] 800D 
MouseAudioAudioOther
[Logitech] G700s [Creative] Sound Blaster Recon3D Fatal1ty Profe... [Corsair] SP2500 2.1 PC Speaker System [NVIDIA] 3D Vision 2 Wireless Glasses Kit 
  hide details  
Reply
post #16 of 20
Quote:
Originally Posted by jermzz View Post

If your res is right after your pump, it would have to be full and pushing through the tubes in order to get pressure, wouldn't it? That's kinda weird. I'm used to seeing 3/4 full res feeding the pump

well air will pressurize differently than water so you could still really get pressure from it but Its just weird to me to even think about doing it that way. plus itll make it difficult to fill the loop which i bet all of you didnt even think about..
post #17 of 20
don't know if this would work, putting a T/drain line into the inlet of the pump and use that for filling the loop
swimming haf-x
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500k 4.7 1.37 v asus p8p67 deluxe vtx3d black HD 7870 kiningston hyper x 1600 
Hard DriveCoolingCoolingOS
hitachi xspc raystorm phobya 360 Ek-vga Bridge edition  windows 7 ultimate 
MonitorPowerCaseMouse
aoc 23.5" mushkin joules 800w coolermaster HaF-X gigabyte 
  hide details  
Reply
swimming haf-x
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500k 4.7 1.37 v asus p8p67 deluxe vtx3d black HD 7870 kiningston hyper x 1600 
Hard DriveCoolingCoolingOS
hitachi xspc raystorm phobya 360 Ek-vga Bridge edition  windows 7 ultimate 
MonitorPowerCaseMouse
aoc 23.5" mushkin joules 800w coolermaster HaF-X gigabyte 
  hide details  
Reply
post #18 of 20
Thread Starter 
Quote:
Originally Posted by Greenback View Post

don't know if this would work, putting a T/drain line into the inlet of the pump and use that for filling the loop

You know, I think I've seen someone do that. I don't think he used an actual reservoir.

Link to what I'm talking about: http://www.million-dollar-pc.com/systems-2008/murderbox/murderbox.htm
     
CPUMotherboardGraphicsRAM
Intel Core i7-3930K ASUS Rampage IV Extreme Diamond Radeon HD 6970 Corsair Vengeance 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Agility 3 OCZ Agility 3 WD Caviar Black Asus External CD/DVD RW 
CoolingOSMonitorPower
Custom Setup Windows 7 Professional Dell ST2220L x3 Corsair AX850 
Case
Silverstone TJ07 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K P8Z68 DELUXE NVIDIA GeForce GTX 580 NVIDIA GeForce GTX 580 
RAMHard DriveHard DriveHard Drive
Corsair Vengeance OCZ Agility 3 SSD (Raid 0) OCZ Agility 3 SSD (Raid 0) Western Digital Caviar Black HDD 
Optical DriveCoolingCoolingOS
External ASUS CD/DVD-RW Drive Custom Koolance Liquid Cooling Bitspower Galaxy Freezer Liquid Cooling Windows 7 Pro - 64 bit 
MonitorKeyboardPowerCase
3x Dell ST2220L LED Monitors Logitech Wireless Corsair AX1200 Corsair 600T 
Mouse
Cyborg R.A.T. 9 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Core i7-3930K ASUS Rampage IV Extreme Diamond Radeon HD 6970 Corsair Vengeance 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Agility 3 OCZ Agility 3 WD Caviar Black Asus External CD/DVD RW 
CoolingOSMonitorPower
Custom Setup Windows 7 Professional Dell ST2220L x3 Corsair AX850 
Case
Silverstone TJ07 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K P8Z68 DELUXE NVIDIA GeForce GTX 580 NVIDIA GeForce GTX 580 
RAMHard DriveHard DriveHard Drive
Corsair Vengeance OCZ Agility 3 SSD (Raid 0) OCZ Agility 3 SSD (Raid 0) Western Digital Caviar Black HDD 
Optical DriveCoolingCoolingOS
External ASUS CD/DVD-RW Drive Custom Koolance Liquid Cooling Bitspower Galaxy Freezer Liquid Cooling Windows 7 Pro - 64 bit 
MonitorKeyboardPowerCase
3x Dell ST2220L LED Monitors Logitech Wireless Corsair AX1200 Corsair 600T 
Mouse
Cyborg R.A.T. 9 
  hide details  
Reply
post #19 of 20
Quote:
Originally Posted by Los Hog View Post

You can change the pump top to something that might work for you LINK

I think this would be the best solution if you wanted to use a res tbh
swimming haf-x
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500k 4.7 1.37 v asus p8p67 deluxe vtx3d black HD 7870 kiningston hyper x 1600 
Hard DriveCoolingCoolingOS
hitachi xspc raystorm phobya 360 Ek-vga Bridge edition  windows 7 ultimate 
MonitorPowerCaseMouse
aoc 23.5" mushkin joules 800w coolermaster HaF-X gigabyte 
  hide details  
Reply
swimming haf-x
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500k 4.7 1.37 v asus p8p67 deluxe vtx3d black HD 7870 kiningston hyper x 1600 
Hard DriveCoolingCoolingOS
hitachi xspc raystorm phobya 360 Ek-vga Bridge edition  windows 7 ultimate 
MonitorPowerCaseMouse
aoc 23.5" mushkin joules 800w coolermaster HaF-X gigabyte 
  hide details  
Reply
post #20 of 20
Thread Starter 
Quote:
Originally Posted by Greenback View Post

Quote:
Originally Posted by Los Hog View Post

You can change the pump top to something that might work for you LINK

I think this would be the best solution if you wanted to use a res tbh

Yes, I've used a pump adapter like that before (on my previous build) but had run into a problem where the part that attached the pump to the adapter kept unscrewing itself under hot temps and popping off causing a major leak. Been scared to use an adapter after that experience.
     
CPUMotherboardGraphicsRAM
Intel Core i7-3930K ASUS Rampage IV Extreme Diamond Radeon HD 6970 Corsair Vengeance 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Agility 3 OCZ Agility 3 WD Caviar Black Asus External CD/DVD RW 
CoolingOSMonitorPower
Custom Setup Windows 7 Professional Dell ST2220L x3 Corsair AX850 
Case
Silverstone TJ07 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K P8Z68 DELUXE NVIDIA GeForce GTX 580 NVIDIA GeForce GTX 580 
RAMHard DriveHard DriveHard Drive
Corsair Vengeance OCZ Agility 3 SSD (Raid 0) OCZ Agility 3 SSD (Raid 0) Western Digital Caviar Black HDD 
Optical DriveCoolingCoolingOS
External ASUS CD/DVD-RW Drive Custom Koolance Liquid Cooling Bitspower Galaxy Freezer Liquid Cooling Windows 7 Pro - 64 bit 
MonitorKeyboardPowerCase
3x Dell ST2220L LED Monitors Logitech Wireless Corsair AX1200 Corsair 600T 
Mouse
Cyborg R.A.T. 9 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Core i7-3930K ASUS Rampage IV Extreme Diamond Radeon HD 6970 Corsair Vengeance 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Agility 3 OCZ Agility 3 WD Caviar Black Asus External CD/DVD RW 
CoolingOSMonitorPower
Custom Setup Windows 7 Professional Dell ST2220L x3 Corsair AX850 
Case
Silverstone TJ07 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K P8Z68 DELUXE NVIDIA GeForce GTX 580 NVIDIA GeForce GTX 580 
RAMHard DriveHard DriveHard Drive
Corsair Vengeance OCZ Agility 3 SSD (Raid 0) OCZ Agility 3 SSD (Raid 0) Western Digital Caviar Black HDD 
Optical DriveCoolingCoolingOS
External ASUS CD/DVD-RW Drive Custom Koolance Liquid Cooling Bitspower Galaxy Freezer Liquid Cooling Windows 7 Pro - 64 bit 
MonitorKeyboardPowerCase
3x Dell ST2220L LED Monitors Logitech Wireless Corsair AX1200 Corsair 600T 
Mouse
Cyborg R.A.T. 9 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Proposing a new loop I've never done before...will it work?