Overclock.net › Forums › AMD › AMD - General › AMD Zosma 960T/1600T/1605T CPU Club
New Posts  All Forums:Forum Nav:

AMD Zosma 960T/1600T/1605T CPU Club - Page 111

post #1101 of 2790
my last score smile.gif

x6 3800MHz @1,3V (BIOS, cpu-z shows 1.332V)
NB 3000MHz @1.25V


338
post #1102 of 2790
So I updated to the latest BIOS for my sabertooth 990fx. Loaded default bios settings didn't change anything other then boot order and set to unlock the cores and it finally booted with 6 cores. (Was able to on my old board but haven't been able till now on my Sabertooth.)

So now i'm going to try and OC some more and see if I can get back to my 4.2ghz on 6 cores.
Bertha
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8150 ASUS Sabertooth 990FX Asus GTX 970 Strix Kingston HyperX 4x4GB DDR3 1600 
Hard DriveHard DriveCoolingOS
OCZ Agility 4 128gb Seagate SSHD 2TB Corsair H110 Windows 10 Pro 
MonitorKeyboardPowerCase
BenQ GW2760S Corsair Strafe OCZ Zt 750w Corsair Air 540 
Mouse
Logitech G602 
  hide details  
Reply
Bertha
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8150 ASUS Sabertooth 990FX Asus GTX 970 Strix Kingston HyperX 4x4GB DDR3 1600 
Hard DriveHard DriveCoolingOS
OCZ Agility 4 128gb Seagate SSHD 2TB Corsair H110 Windows 10 Pro 
MonitorKeyboardPowerCase
BenQ GW2760S Corsair Strafe OCZ Zt 750w Corsair Air 540 
Mouse
Logitech G602 
  hide details  
Reply
post #1103 of 2790
Lucky duck! smile.gif I would complain about mine not unlocking, but I'll be replacing it with the 2500K in my sig rig when I upgrade to Ivy wink.gif
    
CPUGraphicsRAMHard Drive
Intel Core i7 6700HQ nVidia GTX 965m 16GB DDR4-2133 120GB M.2.SSD 
Hard DriveOSMonitorKeyboard
480GB Crucial M500 Windows 10 Pro Dell Ultrasharp u2713hm Corsair Vengeance K70 
MouseAudio
Logitech G600 Creative T20 
  hide details  
Reply
    
CPUGraphicsRAMHard Drive
Intel Core i7 6700HQ nVidia GTX 965m 16GB DDR4-2133 120GB M.2.SSD 
Hard DriveOSMonitorKeyboard
480GB Crucial M500 Windows 10 Pro Dell Ultrasharp u2713hm Corsair Vengeance K70 
MouseAudio
Logitech G600 Creative T20 
  hide details  
Reply
post #1104 of 2790
So far I can boot to 4.2ghz on 6 cores. But Prime95 fails after about 3minutes.
At 3.8ghz I ran for about 15min so far just to test and it was fine.
Only things I've changed is my ram I manually set to 1600 and the CPU voltage to 1.475v


http://valid.canardpc.com/show_oc.php?id=2322731


375
Bertha
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8150 ASUS Sabertooth 990FX Asus GTX 970 Strix Kingston HyperX 4x4GB DDR3 1600 
Hard DriveHard DriveCoolingOS
OCZ Agility 4 128gb Seagate SSHD 2TB Corsair H110 Windows 10 Pro 
MonitorKeyboardPowerCase
BenQ GW2760S Corsair Strafe OCZ Zt 750w Corsair Air 540 
Mouse
Logitech G602 
  hide details  
Reply
Bertha
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8150 ASUS Sabertooth 990FX Asus GTX 970 Strix Kingston HyperX 4x4GB DDR3 1600 
Hard DriveHard DriveCoolingOS
OCZ Agility 4 128gb Seagate SSHD 2TB Corsair H110 Windows 10 Pro 
MonitorKeyboardPowerCase
BenQ GW2760S Corsair Strafe OCZ Zt 750w Corsair Air 540 
Mouse
Logitech G602 
  hide details  
Reply
post #1105 of 2790
So as soon as I try to up the NB and it's Voltage my PC won't boot. It tries to reboot after the BIOS changes. Does start but has power. I hit reset and then it goes to post and says the Unlock failed.

Now since I've done that i can't get it to boot at any settings with the cores unlocked till I set the BIOS back to default boot then go into BIOS and set it back to unlocked....

I guess at this point I'll just go for a higher OC with 4 cores. Debating on getting an FX anywho..
Bertha
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8150 ASUS Sabertooth 990FX Asus GTX 970 Strix Kingston HyperX 4x4GB DDR3 1600 
Hard DriveHard DriveCoolingOS
OCZ Agility 4 128gb Seagate SSHD 2TB Corsair H110 Windows 10 Pro 
MonitorKeyboardPowerCase
BenQ GW2760S Corsair Strafe OCZ Zt 750w Corsair Air 540 
Mouse
Logitech G602 
  hide details  
Reply
Bertha
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8150 ASUS Sabertooth 990FX Asus GTX 970 Strix Kingston HyperX 4x4GB DDR3 1600 
Hard DriveHard DriveCoolingOS
OCZ Agility 4 128gb Seagate SSHD 2TB Corsair H110 Windows 10 Pro 
MonitorKeyboardPowerCase
BenQ GW2760S Corsair Strafe OCZ Zt 750w Corsair Air 540 
Mouse
Logitech G602 
  hide details  
Reply
post #1106 of 2790
Quote:
Originally Posted by TwiggLe View Post

So as soon as I try to up the NB and it's Voltage my PC won't boot. It tries to reboot after the BIOS changes. Does start but has power. I hit reset and then it goes to post and says the Unlock failed.
Now since I've done that i can't get it to boot at any settings with the cores unlocked till I set the BIOS back to default boot then go into BIOS and set it back to unlocked....
I guess at this point I'll just go for a higher OC with 4 cores. Debating on getting an FX anywho..

if you are still using the 212, then that is what's prolly holding your chip back. I had the 212. the highest stable oc as a hex was 4GHz and that was when the weather was cooler.
Second Intel Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
2700 4.5/ 1.28 77 290 (2) 16 / 1866 
Hard DriveCoolingOSMonitor
1000 360/240 10 64 28 2160 
PowerCase
850 540 
  hide details  
Reply
Second Intel Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
2700 4.5/ 1.28 77 290 (2) 16 / 1866 
Hard DriveCoolingOSMonitor
1000 360/240 10 64 28 2160 
PowerCase
850 540 
  hide details  
Reply
post #1107 of 2790
2322840.png
picture.php?albumid=37&pictureid=123

I think I can go higher on my cpu overclock but need to get my ht link down. is this ht link a thing I can adjust with a multi? I need to look I think it is set to auto. But I am running smooth. I have a Thermalright true black heatsink so I think I may be able to go as high as 4.1 or maybe 4.2. But What do you use to monitor temps? because when you unlock they report incorrectly right?
Thanks for any advice.
Also I am runnin 4 x4gig mem. gskill ares.

I tried to use core temp but it gave me a ? where the temp was. Is there a program you can use to monitor the socket temp on the motherboard. ? Thanks. I also lowered my multi for the ht link and got it down to around 2000. But if it runs at 2750MHz would there be any reason not to run it there?
Edited by chemojay - 4/6/12 at 10:38pm
post #1108 of 2790
Quote:
Originally Posted by chemojay View Post

2322840.png
picture.php?albumid=37&pictureid=123
I think I can go higher on my cpu overclock but need to get my ht link down. is this ht link a thing I can adjust with a multi? I need to look I think it is set to auto. But I am running smooth. I have a Thermalright true black heatsink so I think I may be able to go as high as 4.1 or maybe 4.2. But What do you use to monitor temps? because when you unlock they report incorrectly right?
Thanks for any advice.
Also I am runnin 4 x4gig mem. gskill ares.
I tried to use core temp but it gave me a ? where the temp was. Is there a program you can use to monitor the socket temp on the motherboard. ? Thanks. I also lowered my multi for the ht link and got it down to around 2000. But if it runs at 2750MHz would there be any reason not to run it there?

Chem, look at Luke's (post #1101) cpuz screenshots. see the the HT Link reading of 2000MHz under CPU tab? it is the same with Twiggle and that is ideal. Under the Memory tab of cpuz it shows NB as 3000MHz - now that is outstanding. that NB is labeled CPU/NB in my mobo not sure what it is in your mobo.

if your sig is running great, then leave it. goiing past 4GHz as a hex might make you tweak HT Link and NB (CPU/NB) as shown above.

gl!
Second Intel Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
2700 4.5/ 1.28 77 290 (2) 16 / 1866 
Hard DriveCoolingOSMonitor
1000 360/240 10 64 28 2160 
PowerCase
850 540 
  hide details  
Reply
Second Intel Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
2700 4.5/ 1.28 77 290 (2) 16 / 1866 
Hard DriveCoolingOSMonitor
1000 360/240 10 64 28 2160 
PowerCase
850 540 
  hide details  
Reply
post #1109 of 2790
Leave HT alone , you can change NB
SR71
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 960T GA-880GM-USB3 AMD Radeon HD 7750 2GB DDR3 Series Hyundai Electronics  
RAMRAMHard DriveOptical Drive
Hyundai Electronics  Hyundai Electronics  WD 360 GB / 160 GB Sony 
CoolingOSMonitorKeyboard
Cooler Master Hyper TX3 (Push & Pull) Win 7 64 bit / Suse 12.1 64 Acer 20 " Led Wide Logitech 
PowerCaseMouseMouse Pad
VIP Gold 500w Cooler Master Elite 370 Logitech My Underwear 
Audio
Altec Lansing AVS300 / Altec Lansing BXR1121 
  hide details  
Reply
SR71
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 960T GA-880GM-USB3 AMD Radeon HD 7750 2GB DDR3 Series Hyundai Electronics  
RAMRAMHard DriveOptical Drive
Hyundai Electronics  Hyundai Electronics  WD 360 GB / 160 GB Sony 
CoolingOSMonitorKeyboard
Cooler Master Hyper TX3 (Push & Pull) Win 7 64 bit / Suse 12.1 64 Acer 20 " Led Wide Logitech 
PowerCaseMouseMouse Pad
VIP Gold 500w Cooler Master Elite 370 Logitech My Underwear 
Audio
Altec Lansing AVS300 / Altec Lansing BXR1121 
  hide details  
Reply
post #1110 of 2790
Quote:
Originally Posted by staryoshi View Post

Lucky duck! smile.gif I would complain about mine not unlocking, but I'll be replacing it with the 2500K in my sig rig when I upgrade to Ivy wink.gif
Hah, I wish I could say the same. Desperately need a job, then car and then I can start spending on my PC again biggrin.gif

EDIT:

Got this stable: http://valid.canardpc.com/show_oc.php?id=2323407
Edited by bluestr - 4/7/12 at 5:41am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD - General
Overclock.net › Forums › AMD › AMD - General › AMD Zosma 960T/1600T/1605T CPU Club