Originally Posted by Barbecuesaus
Oke funny to know this
I am currently clocking a x6 1605T at 3.2Ghz
I had it Stable at 3.0Ghz for Hour and 30 mins with prime95
OKe i bumped up the FBS a notch to get to 3.2Ghz
and after 10 min the Pc just shut itself down.
I never had this before with overclocking....
Also i use Windows 8 pro sinds this week
Not gonna do anything anymore until i figure out what this means....
Back to 3.7Ghz Quad
not familiar with asrock but Redwoodz is. he might chime in. meanwhile try these settings if you have good cooling . . .
1. Reset the bios to Default
2. Disable Turbo, Cool & Quiet, and C1E
3. Set multiplier to 16
4. Set FSB (BLCK) to 250
5. Set CPU/NB vcore to 1.35v - 1.375v
6 Reset HT Link (NB in Bios) to 2000 MHz (NB vcore to auto)
7. Reset Ram to 1333 MHz/ 1600MHz or default speed
8. Set CPU vcore to 1.40v
9. Set LLC for both CPU and CPU/NB to Enabled or highest setting
8. Unlock Cores
NOTE: Up the CPU vcore 0.01v until it boots. Do not go over 1.47v and watch your temp. Also, you can re-enable Cool & Quiet after you got the system to boot showing signs of stability.Edited by rdr09 - 11/19/12 at 9:56am