Overclock.net › Forums › AMD › AMD - General › AMD Zosma 960T/1600T/1605T CPU Club
New Posts  All Forums:Forum Nav:

AMD Zosma 960T/1600T/1605T CPU Club - Page 72

post #711 of 2790
I have begun searching for various universal Mosfet and Northbridge WC blocks and have located the parts I'm looking for but I have not been able to decide on what kind of Radiator I want for the loop so I need your help.

Radiators:
Single 120mm: http://www.frozencpu.com/products/14397/ex-rad-322/EK_CoolStream_120_XT_Series_Liquid_Cooling_Radiator_EK-CoolStream_RAD_XT_120.html?tl=g30c95s159#blank

Dual 140mm: http://www.frozencpu.com/products/9013/ex-rad-154/Black_Ice_GT_Stealth_280_Radiator_-_Black.html?tl=g30c95s930

Chipset/VRM WC Blocks:

VRM: http://www.frozencpu.com/products/8289/koo-153/Koolance_MVR-100_Motherboard_Voltage_Regulator_Block_No_Fittings.html?tl=g30c293s728#blank

Northbridge: http://www.frozencpu.com/products/7254/ex-blc-456/Koolance_CHC-125_MB_Angled_Liquid_Cooling_Chipset_Block_No_Fittings.html?tl=g30c89s147
post #712 of 2790
Quote:
Originally Posted by Kylezo View Post

Yes, monster threads like these tend to get 'too big' for their usefulness, and although following them as they grow over time makes one quite knowledgable, when you hop in later down the road it's really tough to digest and sort through it all...the spreadsheet is nice to see some peoples max and preferred 24/7 settings and get a ballpark though! I'm still tweaking tons of stuff and I've had my new system for about 2 months. I had the ram all the way up to 1920 before I decided to take the core clock back down to 200 MHz x 18 3.6 GHz @ 1.3v, 1600 ram, tighten the timings to 8-9-9-24-32-1T and a 2800 MHz NB and so far it's stable and pretty cool, although the MB temp gets up to 42C under prime load. I have heatsinks on the VRM though so it should be ok.

Yup. That's exactly the problem. It's especially difficult when the thread starter isn't active in it.
Primary
(11 items)
 
  
Reply
Primary
(11 items)
 
  
Reply
post #713 of 2790
User Name :Linear
CPU: 960T
24/7 OC: 4044Mhz
Max OC: 4044Mhz
Unlockable: Have not tried


http://valid.canardpc.com/show_oc.php?id=2269615
Project Rain
(14 items)
 
  
CPUMotherboardGraphicsRAM
FX-6300 Crosshair V HD7950 GSKILL 
Hard DriveCoolingOSMonitor
SAMSUNG 830 128GB KUHLER 920 WINDOWS 7 64 HP 2311X 
KeyboardPowerCaseMouse
LOGITECH K800 XFX XXX 650 RV02 LOGITECH G700 
Mouse PadAudio
XTRAC RIPPER ASUS XONAR ST 
  hide details  
Reply
Project Rain
(14 items)
 
  
CPUMotherboardGraphicsRAM
FX-6300 Crosshair V HD7950 GSKILL 
Hard DriveCoolingOSMonitor
SAMSUNG 830 128GB KUHLER 920 WINDOWS 7 64 HP 2311X 
KeyboardPowerCaseMouse
LOGITECH K800 XFX XXX 650 RV02 LOGITECH G700 
Mouse PadAudio
XTRAC RIPPER ASUS XONAR ST 
  hide details  
Reply
post #714 of 2790
I was told to post here with the question. It doesnt seem like the right forum, but my other post was erased so here goes.

AMD 960t BE 6 Unlocked
Gigabyte 970a-UD3 Mobo
Gskill Ripjaw DDR3-1600 4gbx2 9-9-9-24 stock
Coolermaster Hyper 212 plus PSU
Raidmax RS 530SS heatsink
Radeon XFX 6770 GPU

CPU: x16 4000MHz
CPU NB: x12 3000MHz
Core Performance Boost: Disabled
CPU Host Clock Control: Manual
CPU Frequency: 250
HT Link Frequency: x9 2250MHz
Memory Clock: 5.33 1332 mhz Dram voltage 1.51v

Voltages
CPU NB vid control 1.3v
Cpu voltage control 1.475

Hello all. I am trying to get my system dialed in and have had some really great help from a few people. I am very new to overclocking and this is the first system I have built. I am sadly already addicted to this drug.

Anyway, I am thinking that my CPU is overclocked correctly and seems to be stable in the games I play. but I think there is a problem with the RAM settings. my ram is rated for 1600 but if I go over the 5.33 to the 6.66 setting to get my memory to 1666 I cant pass the memtest, and games will crash. I dont know if this is a voltage issue or if I just cant fully use the memory. If I back it down to 1332 it will pass memtest and games dont crash. I would also like to adjust the timings, however I think I need to get this solved before I can move on.

If anyone has some advice or needs more info and would be willing to throw some advice my way I would be very grateful. I am reading Dolk's guide but the memory section is like trying to read arabic.

I would like to overclock this or at least get the max I can out of it, just not sure where I should go from here. Thanks in advance for any advice.
post #715 of 2790
Quote:
Originally Posted by Xaxinian View Post

I was told to post here with the question. It doesnt seem like the right forum, but my other post was erased so here goes.
~Snip~

I redirected you here because of your Interest in resolving your OC questions regarding your Unlocked 960T, This thread is indeed the correct place. redface.gif
Quote:
Originally Posted by Xaxinian View Post

Anyway, I am thinking that my CPU is overclocked correctly and seems to be stable in the games I play. but I think there is a problem with the RAM settings.

Edit:
Or perhaps I misconstrued your request for help regarding your OC, but If I may suggest that granting the correct RAM configuration may help improve your OC headroom for your processor therefore making this request for help valid for this section of the forum and directly this thread. thumb.gif
Edited by Fateful_Ikkou - 2/26/12 at 12:49pm
post #716 of 2790
By granting the correct memory configuration is that meaning manually setting the ram timings? Sorry If I am not understanding, just trying to be clear.
post #717 of 2790
Quote:
Originally Posted by Xaxinian View Post

I was told to post here with the question. It doesnt seem like the right forum, but my other post was erased so here goes.
AMD 960t BE 6 Unlocked
Gigabyte 970a-UD3 Mobo
Gskill Ripjaw DDR3-1600 4gbx2 9-9-9-24 stock
Coolermaster Hyper 212 plus PSU
Raidmax RS 530SS heatsink
Radeon XFX 6770 GPU
CPU: x16 4000MHz
CPU NB: x12 3000MHz
Core Performance Boost: Disabled
CPU Host Clock Control: Manual
CPU Frequency: 250
HT Link Frequency: x9 2250MHz
Memory Clock: 5.33 1332 mhz Dram voltage 1.51v
Voltages
CPU NB vid control 1.3v
Cpu voltage control 1.475
Hello all. I am trying to get my system dialed in and have had some really great help from a few people. I am very new to overclocking and this is the first system I have built. I am sadly already addicted to this drug.
Anyway, I am thinking that my CPU is overclocked correctly and seems to be stable in the games I play. but I think there is a problem with the RAM settings. my ram is rated for 1600 but if I go over the 5.33 to the 6.66 setting to get my memory to 1666 I cant pass the memtest, and games will crash. I dont know if this is a voltage issue or if I just cant fully use the memory. If I back it down to 1332 it will pass memtest and games dont crash. I would also like to adjust the timings, however I think I need to get this solved before I can move on.
If anyone has some advice or needs more info and would be willing to throw some advice my way I would be very grateful. I am reading Dolk's guide but the memory section is like trying to read arabic.
I would like to overclock this or at least get the max I can out of it, just not sure where I should go from here. Thanks in advance for any advice.

I think this may help. It helped me:

http://www.gskill.us/forum/showthread.php?t=7688

John
AMD Rig
(4 items)
 
  
CPUMotherboardGraphicsRAM
960T Gigabyte GA-880GA-UD3H Onloard Graphics G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DD... 
  hide details  
Reply
AMD Rig
(4 items)
 
  
CPUMotherboardGraphicsRAM
960T Gigabyte GA-880GA-UD3H Onloard Graphics G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DD... 
  hide details  
Reply
post #718 of 2790
EDIT: you beat me to it...lol
post #719 of 2790
Quote:
Originally Posted by Xaxinian View Post

I was told to post here with the question. It doesnt seem like the right forum, but my other post was erased so here goes.
AMD 960t BE 6 Unlocked
Gigabyte 970a-UD3 Mobo
Gskill Ripjaw DDR3-1600 4gbx2 9-9-9-24 stock
Coolermaster Hyper 212 plus PSU
Raidmax RS 530SS heatsink
Radeon XFX 6770 GPU
CPU: x16 4000MHz
CPU NB: x12 3000MHz
Core Performance Boost: Disabled
CPU Host Clock Control: Manual
CPU Frequency: 250
HT Link Frequency: x9 2250MHz
Memory Clock: 5.33 1332 mhz Dram voltage 1.51v
Voltages
CPU NB vid control 1.3v
Cpu voltage control 1.475
Hello all. I am trying to get my system dialed in and have had some really great help from a few people. I am very new to overclocking and this is the first system I have built. I am sadly already addicted to this drug.
Anyway, I am thinking that my CPU is overclocked correctly and seems to be stable in the games I play. but I think there is a problem with the RAM settings. my ram is rated for 1600 but if I go over the 5.33 to the 6.66 setting to get my memory to 1666 I cant pass the memtest, and games will crash. I dont know if this is a voltage issue or if I just cant fully use the memory. If I back it down to 1332 it will pass memtest and games dont crash. I would also like to adjust the timings, however I think I need to get this solved before I can move on.
If anyone has some advice or needs more info and would be willing to throw some advice my way I would be very grateful. I am reading Dolk's guide but the memory section is like trying to read arabic.
I would like to overclock this or at least get the max I can out of it, just not sure where I should go from here. Thanks in advance for any advice.

I replied to your other thread.

In a nutshell:

Don't waste time overclocking through the HTT. Setting it to 250 is pointless. Any gains from benchmarks or "feels faster" are either placebo or margin of error.
I can reboot my system 5x and each time it will be a different "feel speed". There are so many variables that can impact the system.

HTT:200
Multi: 20
NB: 15
HTL: 10

Increase voltages to whatever values they are now.

Retest ram to see if it now works at 1600.
Primary
(11 items)
 
  
Reply
Primary
(11 items)
 
  
Reply
post #720 of 2790
Quote:
Originally Posted by craftech View Post

I think this may help. It helped me:
http://www.gskill.us/forum/showthread.php?t=7688
John

Thanks, I was using those settings, but just out of circumstance, not any planning on my part. Very concise and understandable.
System
(14 items)
 
  
CPUMotherboardGraphicsRAM
8320 ASUS Sabertooth 990FX GTS 450 G.Skill 1600 ECO 1.35V 4x4 GB 
Hard DriveOptical DriveCoolingMonitor
SSD's - 2 Crucial M4's - 2 Plextor M3S's - 2 Ki... Samsung Corsair H60 Dell U2711, Dell 2407 
Power
Seasonic 
  hide details  
Reply
System
(14 items)
 
  
CPUMotherboardGraphicsRAM
8320 ASUS Sabertooth 990FX GTS 450 G.Skill 1600 ECO 1.35V 4x4 GB 
Hard DriveOptical DriveCoolingMonitor
SSD's - 2 Crucial M4's - 2 Plextor M3S's - 2 Ki... Samsung Corsair H60 Dell U2711, Dell 2407 
Power
Seasonic 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD - General
Overclock.net › Forums › AMD › AMD - General › AMD Zosma 960T/1600T/1605T CPU Club