Overclock.net › Forums › AMD › AMD CPUs › Crosshair III (3) 790FX + Phenom ii x6 1100t black edition = overclock
New Posts  All Forums:Forum Nav:

Crosshair III (3) 790FX + Phenom ii x6 1100t black edition = overclock - Page 4

post #31 of 96
your voltage goes up because of whats called load line calibration and thats ok...i use hwmonitor for temps http://www.cpuid.com/softwares/hwmonitor.html
what is your cooling?
your going to hit a wall at around 4ghz with that chip some just above some just below...after that it will want alot more voltage to get stable and cooling will become a real issue.
your ram will probably clock up over 1600mhz after you get your cpu stable you can play with that. you will also want to overclock cpu/nb but again thats after you get your cpu ctable...until then keep cpu/nb around 2500mhz and set voltage to around 1.25v or so...you'll up it to around 1.3v when you finally set it and it will max at around 2800 to 3000mhz

temps are very important for stability on these...the cooler the less voltage it will need
easyfps
(16 items)
 
  
CPUMotherboardGraphicsRAM
AMD 1100T @4.3 3120cpu/nb 24/7 ASRock 890FX DELUXE5 2 X Powercolor HD6950 2g @1000/1425 Ripjaw 6-9-6-1T @ 1920 
Hard DriveHard DriveCoolingCooling
OCZ Vertex2 SSD WDC WD500 XSPC 750 RS360  Heatkiller GPU-X3 
OSMonitorPowerCase
Win 7 Ultimate 64 Acer 23 backlit led Antec 750w Rosewill ARMOR 
  hide details  
Reply
easyfps
(16 items)
 
  
CPUMotherboardGraphicsRAM
AMD 1100T @4.3 3120cpu/nb 24/7 ASRock 890FX DELUXE5 2 X Powercolor HD6950 2g @1000/1425 Ripjaw 6-9-6-1T @ 1920 
Hard DriveHard DriveCoolingCooling
OCZ Vertex2 SSD WDC WD500 XSPC 750 RS360  Heatkiller GPU-X3 
OSMonitorPowerCase
Win 7 Ultimate 64 Acer 23 backlit led Antec 750w Rosewill ARMOR 
  hide details  
Reply
post #32 of 96
http://www.overclock.net/t/525113/phenom-ii-overclocking-guide/0_20

/thread

You guys need to learn how to use your new stuff before you break something.
post #33 of 96
Thread Starter 
Voltages etc are set to AUTO!


After 5 min of Prime95:

400

Currenty at 57c
post #34 of 96
your at max temps there....any tweaking you can do to cooling will only help....relocate fans turn them the other way...add fan..whatever you can do smile.gif you should also go in and set voltages manually auto will sometimes set much higher than necessary
i see your core v is at 1.4...thats pretty good for 4ghz but tthats going to be your limit unless you can get temps down
easyfps
(16 items)
 
  
CPUMotherboardGraphicsRAM
AMD 1100T @4.3 3120cpu/nb 24/7 ASRock 890FX DELUXE5 2 X Powercolor HD6950 2g @1000/1425 Ripjaw 6-9-6-1T @ 1920 
Hard DriveHard DriveCoolingCooling
OCZ Vertex2 SSD WDC WD500 XSPC 750 RS360  Heatkiller GPU-X3 
OSMonitorPowerCase
Win 7 Ultimate 64 Acer 23 backlit led Antec 750w Rosewill ARMOR 
  hide details  
Reply
easyfps
(16 items)
 
  
CPUMotherboardGraphicsRAM
AMD 1100T @4.3 3120cpu/nb 24/7 ASRock 890FX DELUXE5 2 X Powercolor HD6950 2g @1000/1425 Ripjaw 6-9-6-1T @ 1920 
Hard DriveHard DriveCoolingCooling
OCZ Vertex2 SSD WDC WD500 XSPC 750 RS360  Heatkiller GPU-X3 
OSMonitorPowerCase
Win 7 Ultimate 64 Acer 23 backlit led Antec 750w Rosewill ARMOR 
  hide details  
Reply
post #35 of 96
Quote:
Originally Posted by Xinoxide View Post

http://www.overclock.net/t/525113/phenom-ii-overclocking-guide/0_20
/thread
You guys need to learn how to use your new stuff before you break something.

I recommended that guide my first post. Kinda late...
2nd Rig
(16 items)
 
  
CPUMotherboardGraphicsGraphics
[Intel] 2500k [4.5ghz] [1.3 volts] [AsRock] P67 Extreme 6 [Sapphire] 6950 Toxic [Unlocked to 6970 spec] Powercolor reference 6950 [Unlocked to 6970 spec] 
RAMRAMHard DriveHard Drive
[Samsung] Low voltage memory [@1866 mHz 9-10-9-28] [GSkill] Sniper 1866 9-10-9-28 1.5V [Corsair] 120gb Force GT WD 500GB 
Hard DriveCoolingOSMonitor
2x Seagate Crapstellation ES 2TB [Raid 1] [Coolermaster] V8 Windows 7 [Gateway] FDH2402 
KeyboardPowerCaseMouse
[CM Storm] QuickFire TK [XFX] Core Edition PRO850W [In Win] Dragon Rider Logitech G502 w/ stupid LEDs 
  hide details  
Reply
2nd Rig
(16 items)
 
  
CPUMotherboardGraphicsGraphics
[Intel] 2500k [4.5ghz] [1.3 volts] [AsRock] P67 Extreme 6 [Sapphire] 6950 Toxic [Unlocked to 6970 spec] Powercolor reference 6950 [Unlocked to 6970 spec] 
RAMRAMHard DriveHard Drive
[Samsung] Low voltage memory [@1866 mHz 9-10-9-28] [GSkill] Sniper 1866 9-10-9-28 1.5V [Corsair] 120gb Force GT WD 500GB 
Hard DriveCoolingOSMonitor
2x Seagate Crapstellation ES 2TB [Raid 1] [Coolermaster] V8 Windows 7 [Gateway] FDH2402 
KeyboardPowerCaseMouse
[CM Storm] QuickFire TK [XFX] Core Edition PRO850W [In Win] Dragon Rider Logitech G502 w/ stupid LEDs 
  hide details  
Reply
post #36 of 96
Thread Starter 
After 10 min prime:

380


@ mrinnocent
Quote:
your going to hit a wall at around 4ghz with that chip some just above some just below.

Why you saying this, whereas in ur system info u got ur at 4.3 and max 4.7Ghz = why is different in ur case!?
post #37 of 96
i'm running water cooling so my max cpu temps run around 45c under load so i can get away with more voltage.....i run 1.55 to get stable at 4.3ghz which sometimes jumps up to 1.6 so unless you have good cooling it'll cook wink.gif
4.7ghz was whats known as a suicide run..just to get cpuz validation, voltage was around 1.65 for that definatley not a 24/7 setup
Edited by mrinnocent - 12/28/11 at 11:34pm
easyfps
(16 items)
 
  
CPUMotherboardGraphicsRAM
AMD 1100T @4.3 3120cpu/nb 24/7 ASRock 890FX DELUXE5 2 X Powercolor HD6950 2g @1000/1425 Ripjaw 6-9-6-1T @ 1920 
Hard DriveHard DriveCoolingCooling
OCZ Vertex2 SSD WDC WD500 XSPC 750 RS360  Heatkiller GPU-X3 
OSMonitorPowerCase
Win 7 Ultimate 64 Acer 23 backlit led Antec 750w Rosewill ARMOR 
  hide details  
Reply
easyfps
(16 items)
 
  
CPUMotherboardGraphicsRAM
AMD 1100T @4.3 3120cpu/nb 24/7 ASRock 890FX DELUXE5 2 X Powercolor HD6950 2g @1000/1425 Ripjaw 6-9-6-1T @ 1920 
Hard DriveHard DriveCoolingCooling
OCZ Vertex2 SSD WDC WD500 XSPC 750 RS360  Heatkiller GPU-X3 
OSMonitorPowerCase
Win 7 Ultimate 64 Acer 23 backlit led Antec 750w Rosewill ARMOR 
  hide details  
Reply
post #38 of 96
Quote:
Originally Posted by Bucki View Post

After 10 min prime:
380
@ mrinnocent
Quote:
your going to hit a wall at around 4ghz with that chip some just above some just below.
Why you saying this, whereas in ur system info u got ur at 4.3 and max 4.7Ghz = why is different in ur case!?

Because he has an awesome chip. biggrin.gif
2nd Rig
(16 items)
 
  
CPUMotherboardGraphicsGraphics
[Intel] 2500k [4.5ghz] [1.3 volts] [AsRock] P67 Extreme 6 [Sapphire] 6950 Toxic [Unlocked to 6970 spec] Powercolor reference 6950 [Unlocked to 6970 spec] 
RAMRAMHard DriveHard Drive
[Samsung] Low voltage memory [@1866 mHz 9-10-9-28] [GSkill] Sniper 1866 9-10-9-28 1.5V [Corsair] 120gb Force GT WD 500GB 
Hard DriveCoolingOSMonitor
2x Seagate Crapstellation ES 2TB [Raid 1] [Coolermaster] V8 Windows 7 [Gateway] FDH2402 
KeyboardPowerCaseMouse
[CM Storm] QuickFire TK [XFX] Core Edition PRO850W [In Win] Dragon Rider Logitech G502 w/ stupid LEDs 
  hide details  
Reply
2nd Rig
(16 items)
 
  
CPUMotherboardGraphicsGraphics
[Intel] 2500k [4.5ghz] [1.3 volts] [AsRock] P67 Extreme 6 [Sapphire] 6950 Toxic [Unlocked to 6970 spec] Powercolor reference 6950 [Unlocked to 6970 spec] 
RAMRAMHard DriveHard Drive
[Samsung] Low voltage memory [@1866 mHz 9-10-9-28] [GSkill] Sniper 1866 9-10-9-28 1.5V [Corsair] 120gb Force GT WD 500GB 
Hard DriveCoolingOSMonitor
2x Seagate Crapstellation ES 2TB [Raid 1] [Coolermaster] V8 Windows 7 [Gateway] FDH2402 
KeyboardPowerCaseMouse
[CM Storm] QuickFire TK [XFX] Core Edition PRO850W [In Win] Dragon Rider Logitech G502 w/ stupid LEDs 
  hide details  
Reply
post #39 of 96
Thread Starter 
@ FTW 12

Reading long stuff confuses me ... that is me!!
I rather learn from people explaining instead of reading for hours ... sorry!

@ mrinnocent

Ermm the 1.400 shows only when running prime otherwise it goes to 1.4725 I think
So, shall I set 1.4000V manually in BIOS !? or less then 1.4 !??

Currently the cooler is the one ARTIC FREEZER PRO 2.0 but is not that good.
I orded Hyper 212+ with 2 fans .... and that one will be much better.

Highest/Max voltage?!
In bios when going 1.5000 it shows RED << does this not indicate that IT IS THE LIMIT!?
So u saying 1.4000 is max voltage for this one ?!


---

PS: Maybe I go for WATER COOLING SYSTEM!! Can u recommend any ??
I live in UK ... thanks
post #40 of 96
Thread Starter 
****TT TEMPS GO HIGHER N HIGHER lol (like when I smoke w*ed haha)

383


Guess, I should go lower speeds and then try with the new cooler or eventually with water cooling!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
  • Crosshair III (3) 790FX + Phenom ii x6 1100t black edition = overclock
Overclock.net › Forums › AMD › AMD CPUs › Crosshair III (3) 790FX + Phenom ii x6 1100t black edition = overclock