Overclock.net › Forums › Intel › Intel - General › put rig in a new case, now any overclock does not work
New Posts  All Forums:Forum Nav:

put rig in a new case, now any overclock does not work

post #1 of 24
Thread Starter 
Transferred buddies rig from a NZXT case to a Cosmos S

Changed ONLY the power supply, now any overclock even the exact same settings that were on when it was in the previous case = a blue screen. When I change the settings (lower FSB, more/less volts etc) the error changes. Ideas? New PSU is a Thermaltake TRX RX 850W and the old one is a OCZ-ZS750W. Rig specs:

p5q deluxe
q6700 (was at 3.6ghz)
4gb corsair xms2 (2x2gb)
2gb corsair dominator (2x1gb)
sapphire 6870 1gb
2tb sata drive
dvd burner
6x120mm fans
post #2 of 24
Check if the RAM timings changed or if any other settings somehow reset during the move or something else whacky. Check load line calibration, etc to make sure ALL the settings are similar as before.

When you replace a power supply or motherboard, you essentially have to approach it like a new OC because your old settings aren't neccessarily valid for the new components. They provide a good place to start but it may require just as much tweaking as before to get it stable.

Finally, check your BSOD in the list. This was compiled from an x58 chip IIRC, but the BSODs are transferable for the most part.
Quote:
Originally Posted by coolhandluke41 View Post

I think this may be helpful for some of you,found this on XS
The OverClockers BSOD code list
BSOD codes for overclocking
0x101 = increase vcore
0x124 = increase/decrease vcore or QPI/VTT...have to test to see which one it is
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1E = increase vcore
0x3B = increase vcore
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r
and for all of you with GB mobos you should read this;
http://www.overclock.net/intel-general/910467-ultimate-sandy-bridge-oc-guide-p67a.html
Maximum Dwarf
(15 items)
 
Density!
(12 items)
 
 
CPUMotherboardGraphicsRAM
i5-3570k ASUS MAXIMUS IV GENE HD7970 Gen 1 Ripjaws Z 2x8GB 2133MHz 
Hard DriveHard DriveOptical DriveCooling
1TB RE4 2x3TB WD Red LG 10x BD-R Corsair H80i w/push pull 
OSMonitorKeyboardPower
Win 7 Ultimate 3x 1920x1080 LG IPS displays. Razer Mass Effect 3 Blackwidow Ultimate Cooler Master Silent Pro M850 
CaseMouseMouse Pad
Silverstone TJ08B-E R.A.T. 7 An ergonomic one 
CPUMotherboardRAMHard Drive
i7 3770k Gigabyte Sniper M3 1155 mATX CORSAIR Vengeance 8GB (2 x 4GB) 1600MHz 1TB WD RE4 
Hard DriveHard DriveHard DriveHard Drive
2TB WD Red 2TB WD Red 4TB WD Red 4TB WD Red 
PowerCaseAudioOther
750W Seasonic Gold Fractal Node 804 5.1 Definitive Def Tech PERC 5i RAID card w/ BBU (LSI Firmware) 
  hide details  
Reply
Maximum Dwarf
(15 items)
 
Density!
(12 items)
 
 
CPUMotherboardGraphicsRAM
i5-3570k ASUS MAXIMUS IV GENE HD7970 Gen 1 Ripjaws Z 2x8GB 2133MHz 
Hard DriveHard DriveOptical DriveCooling
1TB RE4 2x3TB WD Red LG 10x BD-R Corsair H80i w/push pull 
OSMonitorKeyboardPower
Win 7 Ultimate 3x 1920x1080 LG IPS displays. Razer Mass Effect 3 Blackwidow Ultimate Cooler Master Silent Pro M850 
CaseMouseMouse Pad
Silverstone TJ08B-E R.A.T. 7 An ergonomic one 
CPUMotherboardRAMHard Drive
i7 3770k Gigabyte Sniper M3 1155 mATX CORSAIR Vengeance 8GB (2 x 4GB) 1600MHz 1TB WD RE4 
Hard DriveHard DriveHard DriveHard Drive
2TB WD Red 2TB WD Red 4TB WD Red 4TB WD Red 
PowerCaseAudioOther
750W Seasonic Gold Fractal Node 804 5.1 Definitive Def Tech PERC 5i RAID card w/ BBU (LSI Firmware) 
  hide details  
Reply
post #3 of 24
that's very odd..is the new psu new?..maybe a loose standoff under the mobo? 6-pin 12v not plugged in all the way?
 
Thuban Powah!
(14 items)
 
 
CPUMotherboardGraphicsRAM
Xeon X5650 Asus P6X58D-E Sapphire HD 7950 G.Skill Trident-X 2600 CL10 
Hard DriveCoolingPowerCase
Samsung 840 pro Bong cooler / RASA waterblock Rosewill Capstone Gold 750 None 
MouseMouse PadAudio
cheap! Newegg box panel ibeats with onboard. 
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1075T w/2 cores locked @ 4.2+ M4a89GTD-Pro XFX Radeon HD 5870 8gb Samsung ddr3 1600 11-11-11-28@ 8-8-8-24 
Hard DriveHard DriveOptical DriveCooling
OCZ Agility2 40gb WD Blue 500GB Lite-On RASA waterblock 
OSMonitorKeyboardPower
Windows & Linux Samsung 1080p 2 ms Dell Thermaltake TR2-800 
CaseMouse
Cooler Master Elite 330 (was) cheap 
  hide details  
Reply
 
Thuban Powah!
(14 items)
 
 
CPUMotherboardGraphicsRAM
Xeon X5650 Asus P6X58D-E Sapphire HD 7950 G.Skill Trident-X 2600 CL10 
Hard DriveCoolingPowerCase
Samsung 840 pro Bong cooler / RASA waterblock Rosewill Capstone Gold 750 None 
MouseMouse PadAudio
cheap! Newegg box panel ibeats with onboard. 
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1075T w/2 cores locked @ 4.2+ M4a89GTD-Pro XFX Radeon HD 5870 8gb Samsung ddr3 1600 11-11-11-28@ 8-8-8-24 
Hard DriveHard DriveOptical DriveCooling
OCZ Agility2 40gb WD Blue 500GB Lite-On RASA waterblock 
OSMonitorKeyboardPower
Windows & Linux Samsung 1080p 2 ms Dell Thermaltake TR2-800 
CaseMouse
Cooler Master Elite 330 (was) cheap 
  hide details  
Reply
post #4 of 24
Thread Starter 
Will check that when I go to his house later today. Everything was the exact same:

10x multiplier
360fsb
1.468v (bios)
2.1v mem
5-5-5-15 timings
c1e off
1.4v nb

Might just swap the old PSU back, though the Cosmos S does have that weird power button plug. Anyone have an adapter for that or know where he can get one?
post #5 of 24
Thread Starter 
Quote:
Originally Posted by Schmuckley View Post

that's very odd..is the new psu new?

Nope came from same seller as the case
post #6 of 24
Thread Starter 
bump
post #7 of 24
Thread Starter 
changed the power supply back, issue is still there

ideas?
post #8 of 24
make sure the case is not touching the motherboard, except where they are screwed in.

Switch case back?

Did u reseat the CPU during all this? Might try doing that.
    
CPUMotherboardGraphicsRAM
i5 2500K @ 4.5 GA-P67A-UD3-B3 EVGA 570 8GB Gskill 1600mhz 
Hard DrivePower
1.5TB CORSAIR 850TX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i5 2500K @ 4.5 GA-P67A-UD3-B3 EVGA 570 8GB Gskill 1600mhz 
Hard DrivePower
1.5TB CORSAIR 850TX 
  hide details  
Reply
post #9 of 24
Thread Starter 
Will check all of that some time today when I go to his house. Hopefully we can fix this, the cosmos s is a sweet case.
post #10 of 24
Check the standoffs between Mobo/Case that there is no extra one's or missing one"s
Extra's being more important with this problem.


thumb.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › put rig in a new case, now any overclock does not work