Hi all, if I'm posting this in the wrong section please let me know.
Hoping I can get some help with a new PC build and my first attempt at overclocking. The components are as follows:
Mobo:
ASRock A75M FM1 AMD A75
CPU:
AMD A6-3650, 2.6Ghz
RAM:
G.SKILL Ripjaws X Series 8GB (2 x 4GB) SDRAM DDR3 1600
PSU:
Antec NEO ECO 400C 400W
SSD:
Crucial M4 64GB
I assembled the system last week with Windows 7 and it was running without a hitch. Having read about how this processor overclocks well, I increased clock speed through the BIOS overclock feature from 100 Mhz to 105 (I left the voltage at the factory set 1.4V). Went to reboot and now the motherboard won't post. The system turns on, fans are spinning, but no video output, no system beeps, nothing.
I tried to reset CMOS via the jumper, and removed the battery for 12 hours as I was hoping a reset of the BIOS would help, but that didn't do anything. Not sure what the problem could be so any input is greatly appreciated.
Hoping I can get some help with a new PC build and my first attempt at overclocking. The components are as follows:
Mobo:
ASRock A75M FM1 AMD A75
CPU:
AMD A6-3650, 2.6Ghz
RAM:
G.SKILL Ripjaws X Series 8GB (2 x 4GB) SDRAM DDR3 1600
PSU:
Antec NEO ECO 400C 400W
SSD:
Crucial M4 64GB
I assembled the system last week with Windows 7 and it was running without a hitch. Having read about how this processor overclocks well, I increased clock speed through the BIOS overclock feature from 100 Mhz to 105 (I left the voltage at the factory set 1.4V). Went to reboot and now the motherboard won't post. The system turns on, fans are spinning, but no video output, no system beeps, nothing.
I tried to reset CMOS via the jumper, and removed the battery for 12 hours as I was hoping a reset of the BIOS would help, but that didn't do anything. Not sure what the problem could be so any input is greatly appreciated.
