Overclock.net › Forums › Cooling › Air Cooling › Noctua NH-D14; holding motherboard by the Noctua cooler OK?
New Posts  All Forums:Forum Nav:

Noctua NH-D14; holding motherboard by the Noctua cooler OK?

post #1 of 7
Thread Starter 
After you install the Noctua, is it OK to place your hand under the radiator with a good grip to hold the motherboard? It feels like there is less strain doing it this way then actually holding the motherboard circuit board with 2 hands because then the weight of the noctua nh-d14 in the middle of the board makes me feel like there is strain in the middle of the board.

so what do you guys think?
post #2 of 7
It's ok to do that. I always hold the noctua instead of the mobo when I get bored and switch cases. smile.gif
Oxygène
(16 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 MSI B350 Tomahawk Arctic VTX3D R9 390 8GB G.Skill Ripjaws  
Hard DriveHard DriveHard DriveHard Drive
Kingston Hyper X Kingston HyperX Fury ADATA SP550 ADATA SX8000 
CoolingOSMonitorKeyboard
Noctua NH-D15 SE-AM4 Windows 10 Dell U2711 Gamdias Hermes E1 
PowerCaseMouseMouse Pad
Chieftec A-135 Series 1000W NZXT. Phantom 410 Gamdias Demeter E2 Gamdias NYX E1 
  hide details  
Reply
Oxygène
(16 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 MSI B350 Tomahawk Arctic VTX3D R9 390 8GB G.Skill Ripjaws  
Hard DriveHard DriveHard DriveHard Drive
Kingston Hyper X Kingston HyperX Fury ADATA SP550 ADATA SX8000 
CoolingOSMonitorKeyboard
Noctua NH-D15 SE-AM4 Windows 10 Dell U2711 Gamdias Hermes E1 
PowerCaseMouseMouse Pad
Chieftec A-135 Series 1000W NZXT. Phantom 410 Gamdias Demeter E2 Gamdias NYX E1 
  hide details  
Reply
post #3 of 7
As long as it has had a recent application of TIM, it should be OK. I do it all the time, but I can see it breaking the TIM seal between IHS and HSF if enough force is applied, so just watch temps afterwards.
post #4 of 7
i typically handle boards by the attached heatsink if there is one attached, its the most sturdy thing there lol
zomgFX
(8 items)
 
CR-48
(14 items)
 
needs moar win
(14 items)
 
CPUMotherboardGraphicsRAM
N455 1.66GHZ Tripod Motherboard MARIO Intel GMA 3150 2 GB DDR3 
Hard DriveHard DriveOSMonitor
16GB SanDisk SSD 32GB Centon SDHC  Lubuntu 12.1" LCD 
CaseMouse
matte. Canon X Mark I 
CPUMotherboardGraphicsGraphics
E8400 C0 P5N-E SLI EVGA 8800GT EVGA 8800GT 
RAMHard DriveHard DriveCooling
4gigs ddr2800 - G.skill Seagate 2tb 5700RPM Crucial M4 64GB Hyper 212+ 
OSMonitorPowerCase
Windoz 7 ulti Asus V222H 21.5 1920x1080 Corsair HX520 Smilodon 
Mouse
Roccat Kone (poop) 
  hide details  
Reply
zomgFX
(8 items)
 
CR-48
(14 items)
 
needs moar win
(14 items)
 
CPUMotherboardGraphicsRAM
N455 1.66GHZ Tripod Motherboard MARIO Intel GMA 3150 2 GB DDR3 
Hard DriveHard DriveOSMonitor
16GB SanDisk SSD 32GB Centon SDHC  Lubuntu 12.1" LCD 
CaseMouse
matte. Canon X Mark I 
CPUMotherboardGraphicsGraphics
E8400 C0 P5N-E SLI EVGA 8800GT EVGA 8800GT 
RAMHard DriveHard DriveCooling
4gigs ddr2800 - G.skill Seagate 2tb 5700RPM Crucial M4 64GB Hyper 212+ 
OSMonitorPowerCase
Windoz 7 ulti Asus V222H 21.5 1920x1080 Corsair HX520 Smilodon 
Mouse
Roccat Kone (poop) 
  hide details  
Reply
post #5 of 7
Thread Starter 
Thanks guys.

Yeah, I actually felt like there was more force holding the edges of the mobo, because it seemed to put strain in the center of the board with all the weight of the dense noctua.

I had the noctua screwed in there pretty tight and my mobo is light so when i lifted it by the noctua, the mobo felt like a waffer cookie; thin and light
post #6 of 7

Probably makes no difference, but I also handle mb's with heatsinks attached by grabbing the heatsink.

alpha updated
(19 items)
 
secundus
(14 items)
 
 
CPUMotherboardGraphicsRAM
i7 4790k Gigabyte GA-Z97X Gaming-7 Intel HD4600 Crucial Ballistix Sport Very Low Profile 8GB Ki... 
Hard DriveCoolingOSMonitor
Samsung 840 EVO 500GB Prolimatech Megahalems Rev. C Windows 8.1 Home Premium 64-bit Acer K242HL 
KeyboardPowerCaseMouse
Dell SK-8110 (PS/2) Seasonic X460 Fanless motherboard tray from CM ATCS 840 Logitech MX 1100 
Mouse PadAudio
Dell Creative SoundBlaster X-Fi MB3 
CPUMotherboardGraphicsRAM
i7 860 Gigabyte GA P55M UD2 ZOTAC/NVidia GTX 650 Ti 2GB 4x4GB G.Skill Ripjaws DDR3-1333 CAS9 
Hard DriveOptical DriveCoolingOS
Samsung 1TB Spinpoint F3 7200.12 Plextor 24x DVD burner Cooler Master Hyper Z600R Win7 64-bit 
MonitorKeyboardPowerCase
Dell E207WFP 20-inch flat panel Logitech Wireless 510 Seasonic X-650 fully modular 80+ Gold Lian Li PC-7FN 
MouseMouse PadAudio
Wireless Mouse WACOM Intuos 3 generic 
  hide details  
Reply
alpha updated
(19 items)
 
secundus
(14 items)
 
 
CPUMotherboardGraphicsRAM
i7 4790k Gigabyte GA-Z97X Gaming-7 Intel HD4600 Crucial Ballistix Sport Very Low Profile 8GB Ki... 
Hard DriveCoolingOSMonitor
Samsung 840 EVO 500GB Prolimatech Megahalems Rev. C Windows 8.1 Home Premium 64-bit Acer K242HL 
KeyboardPowerCaseMouse
Dell SK-8110 (PS/2) Seasonic X460 Fanless motherboard tray from CM ATCS 840 Logitech MX 1100 
Mouse PadAudio
Dell Creative SoundBlaster X-Fi MB3 
CPUMotherboardGraphicsRAM
i7 860 Gigabyte GA P55M UD2 ZOTAC/NVidia GTX 650 Ti 2GB 4x4GB G.Skill Ripjaws DDR3-1333 CAS9 
Hard DriveOptical DriveCoolingOS
Samsung 1TB Spinpoint F3 7200.12 Plextor 24x DVD burner Cooler Master Hyper Z600R Win7 64-bit 
MonitorKeyboardPowerCase
Dell E207WFP 20-inch flat panel Logitech Wireless 510 Seasonic X-650 fully modular 80+ Gold Lian Li PC-7FN 
MouseMouse PadAudio
Wireless Mouse WACOM Intuos 3 generic 
  hide details  
Reply
post #7 of 7
Yep that's how I usually hold the board. It actually seem most stable that way assuming the heat sync is secured on well.
Main Desktop PC
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 5820k ASUS x99 Deluxe EVGA GTX 1080 FTW 4 x 4GB 2800 DDR4 Corsair Vengeance 
Hard DriveHard DriveHard DriveHard Drive
256GB Samsung 840 Pro 240GB OCZ ARC100 3TB 7200 RPM Seagate Barracuda 2TB 7200 RPM Seagate Barracuda 
Optical DriveCoolingOSOS
ASUS 24x DVD/Burner Custom Loop Windows 10 Pro 64bit Debian Linux Distro 
MonitorMonitorKeyboardPower
Acer Predator XB270HU ACHIEVA Shimian QH2700 IPSMS Ducky Shine 2 (White LED/Brown Switches) EVGA 1300w G2 + Individually sleeved cables 
CaseMouseMouse PadAudio
Gun Metal NZXT Switch 810 EVGA Troq x10 Logitech G440 Onkyo TX-NR646 
Other
Bitfenix Recon Fan Controller 
  hide details  
Reply
Main Desktop PC
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 5820k ASUS x99 Deluxe EVGA GTX 1080 FTW 4 x 4GB 2800 DDR4 Corsair Vengeance 
Hard DriveHard DriveHard DriveHard Drive
256GB Samsung 840 Pro 240GB OCZ ARC100 3TB 7200 RPM Seagate Barracuda 2TB 7200 RPM Seagate Barracuda 
Optical DriveCoolingOSOS
ASUS 24x DVD/Burner Custom Loop Windows 10 Pro 64bit Debian Linux Distro 
MonitorMonitorKeyboardPower
Acer Predator XB270HU ACHIEVA Shimian QH2700 IPSMS Ducky Shine 2 (White LED/Brown Switches) EVGA 1300w G2 + Individually sleeved cables 
CaseMouseMouse PadAudio
Gun Metal NZXT Switch 810 EVGA Troq x10 Logitech G440 Onkyo TX-NR646 
Other
Bitfenix Recon Fan Controller 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Air Cooling
Overclock.net › Forums › Cooling › Air Cooling › Noctua NH-D14; holding motherboard by the Noctua cooler OK?