I bought the Corsair H100 on Boxing Day and installed it two nights ago (though at first I plugged the fans in wrong by plugging the wire from the Pump into the wires for the fans that are controlled by the Fan Speed Knob on my Sniper Case but have fixed that up now.) but I am not sure if it is working correctly.
I don't notice and change in fan speed whrn I press the Fan Profile Button on the H100. I checked and I don't have a unit from the recalled Lot Number, but it is scaring me that I don't hear or see a change.
This is what I was getting with the stock fan:

And what I am getting now with the H100:

I played BF3 for a bit and it didn't really get hot either and I didn't hear a change in fan speed:

I am just afraid I am doing something wrong... Is there a program I can use that will run and put my system to a test and see if that will raise the fan speed with it getting hotter due to it?
Here is my set up:

I do have a third fan installed above the H100 fan on the right in a Push/Pull setup taking the air out of the case.
I don't notice and change in fan speed whrn I press the Fan Profile Button on the H100. I checked and I don't have a unit from the recalled Lot Number, but it is scaring me that I don't hear or see a change.
This is what I was getting with the stock fan:

And what I am getting now with the H100:

I played BF3 for a bit and it didn't really get hot either and I didn't hear a change in fan speed:

I am just afraid I am doing something wrong... Is there a program I can use that will run and put my system to a test and see if that will raise the fan speed with it getting hotter due to it?
Here is my set up:

I do have a third fan installed above the H100 fan on the right in a Push/Pull setup taking the air out of the case.















