Overclock.net › Forums › Components › Computer Room / Office › Custom Eyefinity Desk Build
New Posts  All Forums:Forum Nav:

Custom Eyefinity Desk Build - Page 2

post #11 of 34
Thread Starter 
Beginning to Stain


photo36c.jpg

I'll be using... Minwax pre-stain, Minwax Red Mahogany, Varathane Polyurethane Stain Satin clear coat.



photo35mx.jpg

photo37k.jpg

testing with that piece I cut out of the desk to make sure it looks ok.



Looks fine. Time to get working.

photo38n.jpg

Pre-stain on. wait 30 mins to dry....

photo39f.jpg

1st coat on.. wait 15 mins for it to soak in, then wipe off excess..

photo40d.jpg

photo41ri.jpg

Excess wiped off looks good I think, now wait 3-6 hours to dry....




All pictures taken with iPhone 4S. smile.gif

Owned by self while staining... didn't put on gloves...
photo42v.jpg
Edited by Vestito - 1/7/12 at 2:19pm
Gaming Build 2.0
(20 items)
 
  
CPUMotherboardGraphicsGraphics
i5 2500k ASUS Maximus VI Gene - Z MSI 7970 OC Edition MSI 7970 OC Edition 
RAMHard DriveHard DriveCooling
8GB Corsair Vengence 1600mhz 750gb WD Cav Blk 6.0  OCZ 120GB Vertex 3 MAX IOPS Corsair H80 
MonitorMonitorMonitorMonitor
Asus VH238 Dell U2412M Dell U2412M Dell U2412M 
KeyboardPowerCaseMouse
Razer Black Widow Ultimate Sea Sonic X-1250W TJ-08E Razer Mamba 
Audio
Logitech Z906 
  hide details  
Reply
Gaming Build 2.0
(20 items)
 
  
CPUMotherboardGraphicsGraphics
i5 2500k ASUS Maximus VI Gene - Z MSI 7970 OC Edition MSI 7970 OC Edition 
RAMHard DriveHard DriveCooling
8GB Corsair Vengence 1600mhz 750gb WD Cav Blk 6.0  OCZ 120GB Vertex 3 MAX IOPS Corsair H80 
MonitorMonitorMonitorMonitor
Asus VH238 Dell U2412M Dell U2412M Dell U2412M 
KeyboardPowerCaseMouse
Razer Black Widow Ultimate Sea Sonic X-1250W TJ-08E Razer Mamba 
Audio
Logitech Z906 
  hide details  
Reply
post #12 of 34
this is turning out nicely I cannot wait to see it when it is finished smile.gif
post #13 of 34
Thread Starter 
Well looking back at my first coat pictures and comparing to right now this morning I just put on the third coat I probably should have left it alone at the first coat. I'm having problems getting the stain to look even but I think I'm done playing with it. It looks ok, the left and right side of the desk are different shades right now but overall I think it looks ok. Let me know what you think!

photo43j.jpg
Gaming Build 2.0
(20 items)
 
  
CPUMotherboardGraphicsGraphics
i5 2500k ASUS Maximus VI Gene - Z MSI 7970 OC Edition MSI 7970 OC Edition 
RAMHard DriveHard DriveCooling
8GB Corsair Vengence 1600mhz 750gb WD Cav Blk 6.0  OCZ 120GB Vertex 3 MAX IOPS Corsair H80 
MonitorMonitorMonitorMonitor
Asus VH238 Dell U2412M Dell U2412M Dell U2412M 
KeyboardPowerCaseMouse
Razer Black Widow Ultimate Sea Sonic X-1250W TJ-08E Razer Mamba 
Audio
Logitech Z906 
  hide details  
Reply
Gaming Build 2.0
(20 items)
 
  
CPUMotherboardGraphicsGraphics
i5 2500k ASUS Maximus VI Gene - Z MSI 7970 OC Edition MSI 7970 OC Edition 
RAMHard DriveHard DriveCooling
8GB Corsair Vengence 1600mhz 750gb WD Cav Blk 6.0  OCZ 120GB Vertex 3 MAX IOPS Corsair H80 
MonitorMonitorMonitorMonitor
Asus VH238 Dell U2412M Dell U2412M Dell U2412M 
KeyboardPowerCaseMouse
Razer Black Widow Ultimate Sea Sonic X-1250W TJ-08E Razer Mamba 
Audio
Logitech Z906 
  hide details  
Reply
post #14 of 34
hey just finished my desk today aswell, used almost the same exact stuff as you. i did 3 layers of stain and 2 layers of the finish. the surface came out kinda roughish. Hmmm i'm not sure what i did lol .
Excalibur
(16 items)
 
  
Reply
Excalibur
(16 items)
 
  
Reply
post #15 of 34
after staining you need to use a sealer, then sand and then finish with several layers of clear coat. looks good!
Chimera
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i5 2500k 4.8Ghz ASUS P8Z68-v PRO GEN3 Evga gtx 580 3gb Evga gtx 580 3gb 
RAMHard DriveCoolingOS
8Gb Veangence ocz agility 3 watercooled Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
d3 - 23" acer led monitors Logitech G15 1050W modular custom built from scratch case 
MouseAudioAudio
CM Inferno afterglow wireless 7.1 headphones w/ mic x-fi titanium soundcard 
  hide details  
Reply
Chimera
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i5 2500k 4.8Ghz ASUS P8Z68-v PRO GEN3 Evga gtx 580 3gb Evga gtx 580 3gb 
RAMHard DriveCoolingOS
8Gb Veangence ocz agility 3 watercooled Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
d3 - 23" acer led monitors Logitech G15 1050W modular custom built from scratch case 
MouseAudioAudio
CM Inferno afterglow wireless 7.1 headphones w/ mic x-fi titanium soundcard 
  hide details  
Reply
post #16 of 34
Thread Starter 
Quote:
Originally Posted by Dannnnn_the_man View Post

hey just finished my desk today aswell, used almost the same exact stuff as you. i did 3 layers of stain and 2 layers of the finish. the surface came out kinda roughish. Hmmm i'm not sure what i did lol .
I have a pack of 600 grit sand paper ready to sand between the finishes, I talked to the guy at home depot and he said to sand between each layer of finish/clear stuff. Not too excessive just a light sand. I think you might have to sand down the 2 layers of clear you put on and do it again tongue.gif.


Quote:
Originally Posted by Tipless View Post

after staining you need to use a sealer, then sand and then finish with several layers of clear coat. looks good!

Clear coat and finish are the same thing right? that varathane can is supposed to be the clear/finisher I think.


Update on my project:

I put on 1 coat of finish/clear and stored it in garage for now, just don't get enough sunlight hours during weekends and no time at all during weekdays, hopefully I can finish this project next weekend then work on sleeving my PSU and buying the rest of my WC loop I want to do.
Gaming Build 2.0
(20 items)
 
  
CPUMotherboardGraphicsGraphics
i5 2500k ASUS Maximus VI Gene - Z MSI 7970 OC Edition MSI 7970 OC Edition 
RAMHard DriveHard DriveCooling
8GB Corsair Vengence 1600mhz 750gb WD Cav Blk 6.0  OCZ 120GB Vertex 3 MAX IOPS Corsair H80 
MonitorMonitorMonitorMonitor
Asus VH238 Dell U2412M Dell U2412M Dell U2412M 
KeyboardPowerCaseMouse
Razer Black Widow Ultimate Sea Sonic X-1250W TJ-08E Razer Mamba 
Audio
Logitech Z906 
  hide details  
Reply
Gaming Build 2.0
(20 items)
 
  
CPUMotherboardGraphicsGraphics
i5 2500k ASUS Maximus VI Gene - Z MSI 7970 OC Edition MSI 7970 OC Edition 
RAMHard DriveHard DriveCooling
8GB Corsair Vengence 1600mhz 750gb WD Cav Blk 6.0  OCZ 120GB Vertex 3 MAX IOPS Corsair H80 
MonitorMonitorMonitorMonitor
Asus VH238 Dell U2412M Dell U2412M Dell U2412M 
KeyboardPowerCaseMouse
Razer Black Widow Ultimate Sea Sonic X-1250W TJ-08E Razer Mamba 
Audio
Logitech Z906 
  hide details  
Reply
post #17 of 34
Why didn't you use a skillsaw for the straight cuts then jig for the rounded corner?
It's a computer
(15 items)
 
  
CPUMotherboardGraphicsGraphics
2500k 4.5ghz @1.35v Asrock Extreme 3 Gen 3 Asus GTX 470 725/1694 @1.025v EVGA GTS 450 900/1804 (PhysX) 
RAMHard DriveOptical DriveCooling
8gb Gskill 1600mhz 640gb, Seagate 1tb Spinpoint F3, Kingston 60gb SSD LG Combo Thermaltake SpinQ 
OSMonitorKeyboardPower
Win7 64bit Ultimate Acer X203H 1600x900 CM Storm Quickfire w/ Blues PC Power and Cooling 750watt Silencer MKII 
CaseMouseMouse Pad
Silverstone Raven RV02 Microsoft 1.1A Razer Goliathus 
  hide details  
Reply
It's a computer
(15 items)
 
  
CPUMotherboardGraphicsGraphics
2500k 4.5ghz @1.35v Asrock Extreme 3 Gen 3 Asus GTX 470 725/1694 @1.025v EVGA GTS 450 900/1804 (PhysX) 
RAMHard DriveOptical DriveCooling
8gb Gskill 1600mhz 640gb, Seagate 1tb Spinpoint F3, Kingston 60gb SSD LG Combo Thermaltake SpinQ 
OSMonitorKeyboardPower
Win7 64bit Ultimate Acer X203H 1600x900 CM Storm Quickfire w/ Blues PC Power and Cooling 750watt Silencer MKII 
CaseMouseMouse Pad
Silverstone Raven RV02 Microsoft 1.1A Razer Goliathus 
  hide details  
Reply
post #18 of 34
Thread Starter 
well that was the plan... probably would've been easier. my table/skillsaws went missing... probably stuck in some storage units. In hindsight the turns might have been easier if i drilled 3-4 holes in the turn....

the jigsaw+pack of blades only costed like 35 bucks.... this whole project including the saw/paint/board is only at about $150 right now. I don't see it getting anymore expensive unless the 2x4s don't hold up the desk... Then I might need to add a nightstand/filing cabinet in a corner or some L brackets maybe even a leg or something frown.gif hopefully not though.
Gaming Build 2.0
(20 items)
 
  
CPUMotherboardGraphicsGraphics
i5 2500k ASUS Maximus VI Gene - Z MSI 7970 OC Edition MSI 7970 OC Edition 
RAMHard DriveHard DriveCooling
8GB Corsair Vengence 1600mhz 750gb WD Cav Blk 6.0  OCZ 120GB Vertex 3 MAX IOPS Corsair H80 
MonitorMonitorMonitorMonitor
Asus VH238 Dell U2412M Dell U2412M Dell U2412M 
KeyboardPowerCaseMouse
Razer Black Widow Ultimate Sea Sonic X-1250W TJ-08E Razer Mamba 
Audio
Logitech Z906 
  hide details  
Reply
Gaming Build 2.0
(20 items)
 
  
CPUMotherboardGraphicsGraphics
i5 2500k ASUS Maximus VI Gene - Z MSI 7970 OC Edition MSI 7970 OC Edition 
RAMHard DriveHard DriveCooling
8GB Corsair Vengence 1600mhz 750gb WD Cav Blk 6.0  OCZ 120GB Vertex 3 MAX IOPS Corsair H80 
MonitorMonitorMonitorMonitor
Asus VH238 Dell U2412M Dell U2412M Dell U2412M 
KeyboardPowerCaseMouse
Razer Black Widow Ultimate Sea Sonic X-1250W TJ-08E Razer Mamba 
Audio
Logitech Z906 
  hide details  
Reply
post #19 of 34
Quote:
Originally Posted by Vestito View Post

well that was the plan... probably would've been easier. my table/skillsaws went missing... probably stuck in some storage units. In hindsight the turns might have been easier if i drilled 3-4 holes in the turn....
the jigsaw+pack of blades only costed like 35 bucks.... this whole project including the saw/paint/board is only at about $150 right now. I don't see it getting anymore expensive unless the 2x4s don't hold up the desk... Then I might need to add a nightstand/filing cabinet in a corner or some L brackets maybe even a leg or something frown.gif hopefully not though.

I wouldn't imagine 4x4s having any issue assuming you have at least like 1 crossbeam support
It's a computer
(15 items)
 
  
CPUMotherboardGraphicsGraphics
2500k 4.5ghz @1.35v Asrock Extreme 3 Gen 3 Asus GTX 470 725/1694 @1.025v EVGA GTS 450 900/1804 (PhysX) 
RAMHard DriveOptical DriveCooling
8gb Gskill 1600mhz 640gb, Seagate 1tb Spinpoint F3, Kingston 60gb SSD LG Combo Thermaltake SpinQ 
OSMonitorKeyboardPower
Win7 64bit Ultimate Acer X203H 1600x900 CM Storm Quickfire w/ Blues PC Power and Cooling 750watt Silencer MKII 
CaseMouseMouse Pad
Silverstone Raven RV02 Microsoft 1.1A Razer Goliathus 
  hide details  
Reply
It's a computer
(15 items)
 
  
CPUMotherboardGraphicsGraphics
2500k 4.5ghz @1.35v Asrock Extreme 3 Gen 3 Asus GTX 470 725/1694 @1.025v EVGA GTS 450 900/1804 (PhysX) 
RAMHard DriveOptical DriveCooling
8gb Gskill 1600mhz 640gb, Seagate 1tb Spinpoint F3, Kingston 60gb SSD LG Combo Thermaltake SpinQ 
OSMonitorKeyboardPower
Win7 64bit Ultimate Acer X203H 1600x900 CM Storm Quickfire w/ Blues PC Power and Cooling 750watt Silencer MKII 
CaseMouseMouse Pad
Silverstone Raven RV02 Microsoft 1.1A Razer Goliathus 
  hide details  
Reply
post #20 of 34
and no there are three steps to staining: stain, sealer, finish.

apply stain in desired amount
let dry
apply sealer and let dry
sand
apply another coat of sealer and let dry
sand
clear coat/finish as many coats as ya want
wet sand(optional)
Chimera
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i5 2500k 4.8Ghz ASUS P8Z68-v PRO GEN3 Evga gtx 580 3gb Evga gtx 580 3gb 
RAMHard DriveCoolingOS
8Gb Veangence ocz agility 3 watercooled Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
d3 - 23" acer led monitors Logitech G15 1050W modular custom built from scratch case 
MouseAudioAudio
CM Inferno afterglow wireless 7.1 headphones w/ mic x-fi titanium soundcard 
  hide details  
Reply
Chimera
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i5 2500k 4.8Ghz ASUS P8Z68-v PRO GEN3 Evga gtx 580 3gb Evga gtx 580 3gb 
RAMHard DriveCoolingOS
8Gb Veangence ocz agility 3 watercooled Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
d3 - 23" acer led monitors Logitech G15 1050W modular custom built from scratch case 
MouseAudioAudio
CM Inferno afterglow wireless 7.1 headphones w/ mic x-fi titanium soundcard 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Room / Office
Overclock.net › Forums › Components › Computer Room / Office › Custom Eyefinity Desk Build