Originally Posted by E-Peen
You're actually right where you're supposed to be, I think. You're running Heaven at full settings, and you're getting really nice performance.
Yeah it seems to be ok for uniengine but not for games still, I quickly played crysis 2 and it is still not good, I think I should still be getting better?
Isn't that quite low? It drops to around 24-30 when action starts and is usually a contant 30-35 when just doing nothing on it.
Originally Posted by Frazz
Here is what I get on my Rig with only one HD6950, overclocked to 900Mhz | 1400Mhz
I suggest you try overclocking your card to the same settings, therefore you can see where you stand.
Btw low FPS in towns on Skyrim is normal, towns seem to kill system performance.
I tried this and it was not stable. I did 900Mhz core, 1400Mhz memory and 1180voltage (with the 20%+ increase in power). It got around a quarter or half the way through a unigine benchmark before it started going all fuzzy and i think i saw a few artifacts too. After about 5 seconds or 10 seconds of that it went into some sort of weird mirror view! it split the unigine screen in half, I quit before i could get a picture and when I quit the desktop was the same, my gadgets on the right hand side of my desktop was cut in half and the other side to the gadget was on the left hand side of the screen! things was also fuzzing too, like a bad connection on a dvi-d lead (although not that, of course). I have reverted back to 880 / 1375 at 1175 (with the 20%+ increase in power) and it is once again stable, I have played half an hour of Crysis 2 with no problem, and the 2 benchmarks earlier where with the 880 / 1375 setting, so that is stable.
What now? Is this just an acceptable fps for my games? Perhaps it really is just me, I just do expect more fps from games than that with this card.