STH10 Now Shipping

We are proud to announce that the STH10 is now shipping.

The STH10 is available “flat-packed” (unassembled) to save on shipping or fully assembled.

Both XL-ATX and HPTX form factors are available (exterior case dimensions are the same).

Features (standard equipment):

• All aluminum construction - .090" (2.3mm) chassis .063"(1.6mm) doors/covers
• Choice of ventilated or solid doors and covers (on a panel by panel basis)
• Slide out MB tray with Tech Station conversion kit
• Dedicated Mounts for 2 HDD’s and 4 SSD’s plus one 3.50” Bay
• Choice of hex mesh or 40mm fan holes on PCI back plate
• Quad PSU mounts (Support bracket available: MAC-123)
• Extensive room behind the MB tray for wire & tubing management.
• Two single bay filler plates and five triple bay cover plates
• Filler plates for top and bottom radiator openings, MB Chamber and 40mm fan openings on MB tray (if selected), PCI slots, and three PSU covers
• Four sets of mounting brackets for 5.25” devices (MAC-125)
• Lamptron anti-vandal style switches (power & reset) and wiring harnesses: blue ring for power and red dot for HDD activity. They are standard switches that can be easily swapped out for custom color combinations.
• Four rubber feet with screws (casters are available: MAC-107)
• Misc. hardware: Thumbscrews, MB standoffs, Tie-wraps, etc.
• Available in black or white matte

Case Configuration Options:

ATX Layout: Standard (N/C), Reverse (N/C)
Form Factor: XL-ATX (N/C), HPTX (N/C)
MB Door: Ventilated (N/C), Solid (N/C), XL Window (20.00), XXL Window (30.00)
Upper Chamber Covers: Ventilated (N/C), Solid (N/C)
Lower Chamber Covers: Ventilated (N/C), Solid (N/C)
Top Cover: Ventilated (N/C), Solid (N/C), Ext. Ventilated 120mm (60.00)
PCI Back Plate: Fan Holes (N/C), Hex Mesh (N/C)
Packaging: Flat-Pack/Unassembled (N/C), Assembled (N/C)

Specifications:

Size: 32.25"H x 26.56"D x 11.25"W (819mm x 675mm x 286mm) *
PCI Slots: 10
Form Factor: XL-ATX (13.60” x 10.75”) or HPTX (13.60" x 15.00” - 346mm x 381mm)
Max Radiator Size – Upper Chamber Side: 120.4 (Mounts not included)
Max Radiator Size – Upper Chamber Top: 140.4 or 180.3 (Mount not included)
Max Radiator Size – Lower Chamber Side: 140.4 (Mounts not Included)
Cooling Tower Clearance: 180mm
Flex-Bays (5.25” Bays): 17
HDD Capacity: 2 native (22 using Flex-Bays) plus 4 native SSD’s
Weight: 32 lbs.

Compartment sizes (inside frame dimensions):
Upper: 26.00"(660mm) x 9.70"(246mm) x 6.41"(163mm)
Middle: 26.00"(660mm) x 9.70"(246mm) x 17.44"(443mm)
Lower: 26.00"(660mm) x 9.70"(246mm) x 7.41"(188mm)

Inside width door/covers: 11.12"(282mm)

* Note: Sizes shown are for the case only. Rubber feet add .75" (19mm) to height, optional casters add 2.63" (67mm).

Price: $569.95

More information to come…
Edited by Case Labs - 4/28/12 at 7:43am

Reserved
Edited by Case Labs - 10/8/12 at 3:44pm

Reserved

Thanks Yes, we'll have a pedestal available in a couple of weeks. I don't know if we'll have the 120mm fan holes on a TX10 or not. My assumption was that most TX10 buyers would have very specific requirements for where (and if) they would want fans and what type they would be, and would probably not want to have a big hole right where they wanted to put something else. The STH10 (like the other cases) is intended to be a little more turn-key for things like fan mounts (which btw, could be used to mount a 360).