Quote:
Originally Posted by Imprezzion 
If it's a reference it should be whatever the manual says to use on a 7970.
I am kinda not getting my 7970.. Must've hit a frequency wall... 1200Mhz perfectly stable on 1.188v. 1250Mhz already needs 1.262v and anything over 1250, say 1265, is impossible to stabilize even with 1.299v ;( 1250 aint bad at all but I was hoping for a 1300+ card...
Max temps in-game with my Accelero 7970 at 1250 with 1.262v is just 55-60c so... Got the room to run 1.299v 24/7 but it just doesn't help

If it's a reference it should be whatever the manual says to use on a 7970.
I am kinda not getting my 7970.. Must've hit a frequency wall... 1200Mhz perfectly stable on 1.188v. 1250Mhz already needs 1.262v and anything over 1250, say 1265, is impossible to stabilize even with 1.299v ;( 1250 aint bad at all but I was hoping for a 1300+ card...
Max temps in-game with my Accelero 7970 at 1250 with 1.262v is just 55-60c so... Got the room to run 1.299v 24/7 but it just doesn't help

I had a similar issue and I did two things that worked. Don't know why but it worked. I forget the exact commands and am not at home to check but perhaps the gurus can fill in the blanks. I started AfterBurner via the run command with the /xcl modification. I also disabled ULPS (??????????? forget the exact letters ) via sapphira Trixx . Now I can do 1300 + stable in games . Did that only once and it still works.
Edited by martinhal - 6/4/12 at 10:39am



























