Originally Posted by daGGoth
You can state this to a fact
for his CPU, Motherboard, and Memory setup?
its a fact. you can read this in EVERY phenom 2 overclocking guide
the higher you clock the cpu-nb, the further the imc opens up, the more throughput. where full throttle is, is where youll see the limits.
*edit* and you want to keep the ht link at 2000 +/- 100. under NORMAL circumstances, it causes instabilities in MOST cases.
Originally Posted by Serious Dude
- Should i keep auto cpu shut off temp to 60 or 70???
- what voltage, etc do i need?
its good practice to keep your load temps at 55* or less. they usually start losing stability right around that point.
voltage ? only your chip knows what it needs. thats where the fun comes into overclocking.
read gappos guide that fox linked. 1 of THE best.
also, quick stability checking as you progress. it isnt for finding 100%, its too find out if its possible to go higher.
http://www.overclock.net/general-processor-discussions/838244-prime95-quick-dirty-guide-custom-settings.htmlEdited by pc-illiterate - 1/10/12 at 3:54pm