Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*
New Posts  All Forums:Forum Nav:

Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition* - Page 109

Poll Results: Was this guide helpful?

Poll expired: Oct 17, 2012  
  • 80% (237)
    Yes (and I DO have an ASRock motherboard).
  • 15% (45)
    Yes (but I DO NOT have an ASRock motherboard).
  • 2% (7)
    No (and I DO have an ASRock motherboard).
  • 2% (7)
    No (but I DO NOT have an ASRock motherboard).
296 Total Votes  
post #1081 of 9471
Quote:
Originally Posted by n1x1n View Post

is mine ok? I ran it for 12 hours or more... didn't take a screenshot but it looked exactly the same as this... temperature never exceeded 62C
27yqvrd.jpg

ur chip is not ivy, look sfine
post #1082 of 9471
I got my problem solved, bought a MSI board biggrin.gif
post #1083 of 9471
I have a problem,

I just built my PC, ASRock z77 w/ GSkill 8gb 2133mhz. BIOS defaults it to 1600mhz

I see the XMP profile in the bios but when I try and set it to profile 1, which is the right settings. I restart the computer, it restarts 3 times, and then on the 3rd time it boots up but with default 1600mhx settings. Need help. Thanks.
post #1084 of 9471
not sure, i stay away from xmp, just use manual. xmp seems doesn't work for me neither. i guess ur pc was not getting enough voltage or current.
post #1085 of 9471
Quote:
Originally Posted by kennyparker1337 View Post

There is an answer. The answer is VID.
VID is the stock clocks your CPU comes with (for each multiplier up to x33). The lower the VID, the better you are with a good overclock.
All though VID isn't the end all answer. Regardless of VID, some chips just came out made better than others.

Oh great explanation! I see now, thanks thumb.gif
post #1086 of 9471
Thats funny, with F-Stream Tuning running, in 2 seconds the prime95 and linx BSOD !!!! But the system is very stable !!!

Fail F-Stream !!!
Edited by BenchAndGames - 7/29/12 at 6:42pm
Tha G1-Killer RIG
(11 photos)
  
Reply
Tha G1-Killer RIG
(11 photos)
  
Reply
post #1087 of 9471
Guys if you're looking for a cheap but very high quality potent AIR cooler, check Scythe Mine 2. Nobody ever hears of it because it aimed at the very high end BUT failed by a few degrees.

Still it is VERY high end and jesus christ, for 25€ I got a cooler holding my 2500k at 4.6 GHz at 70° at 1.36v max, usually at 1.34, depends on how much the CPU gets boosted. But highest vcore is 1.36.

Great cooler. Might be a little big for some of you guys but unless youre not using super high RAM coolers( who needs that crap anyway) you will not have any problems.
post #1088 of 9471
Quote:
Originally Posted by Megagoth1702 View Post

Guys if you're looking for a cheap but very high quality potent AIR cooler, check Scythe Mine 2. Nobody ever hears of it because it aimed at the very high end BUT failed by a few degrees.
Still it is VERY high end and jesus christ, for 25€ I got a cooler holding my 2500k at 4.6 GHz at 70° at 1.36v max, usually at 1.34, depends on how much the CPU gets boosted. But highest vcore is 1.36.
Great cooler. Might be a little big for some of you guys but unless youre not using super high RAM coolers( who needs that crap anyway) you will not have any problems.

Considering most of the higher-end aircoolers have 2~3 fans, this could be forgiven. My old 2550K at 4.8ghz at 1.4v normally ran 50~60C load, but that was watercooled. The fact you are aircooling with a 10C difference, it's not bad. wink.gif
    
CPUMotherboardGraphicsRAM
Intel i5 3570K [Delid] Asrock Z77E-ITX XFX Radeon R9 Fury X G.SKILL 2133MHz 8GB DDR3 
Hard DriveHard DriveHard DriveHard Drive
Crucial M4 256GB Silicon Power S60 120GB Western Digital Blue Scorpio 1TB Seagate Constellation 2 1TB 
CoolingCoolingCoolingCooling
Swiftech Apogee Drive II XSPC RX240+EX240 [Painted White] 5x 2150RPM Gentle Typhoons PWM [Painted Black+W... Bitspower Water Tank Z-Multi 80 Inline Reservoir  
OSMonitorMonitorKeyboard
Windows 10 LG 34UC88-B 34" Ultrawide 3440x1440 75Hz HP ZR2240w IPS WASD CODE 87-Key [MX Clear + PBT Keycaps] 
PowerCaseMouseAudio
Seasonix X-750 Case Labs Mercury S3 Logitech G502 Sennheiser HD 598 SE 
Audio
Micca OriGen 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i5 3570K [Delid] Asrock Z77E-ITX XFX Radeon R9 Fury X G.SKILL 2133MHz 8GB DDR3 
Hard DriveHard DriveHard DriveHard Drive
Crucial M4 256GB Silicon Power S60 120GB Western Digital Blue Scorpio 1TB Seagate Constellation 2 1TB 
CoolingCoolingCoolingCooling
Swiftech Apogee Drive II XSPC RX240+EX240 [Painted White] 5x 2150RPM Gentle Typhoons PWM [Painted Black+W... Bitspower Water Tank Z-Multi 80 Inline Reservoir  
OSMonitorMonitorKeyboard
Windows 10 LG 34UC88-B 34" Ultrawide 3440x1440 75Hz HP ZR2240w IPS WASD CODE 87-Key [MX Clear + PBT Keycaps] 
PowerCaseMouseAudio
Seasonix X-750 Case Labs Mercury S3 Logitech G502 Sennheiser HD 598 SE 
Audio
Micca OriGen 
  hide details  
Reply
post #1089 of 9471
Just got a 3570K and I have a H100. Able to OC to 4.5 at CPU PLL 1.709v and Turbo Voltage: +0.004v.


The thing is I can not get up to 46 for a 4.6. I put up the PLL and TV and get BSOD. Should I increasing only one or the other? How far can I put TV +?

Thanks for any help!
post #1090 of 9471
Thread Starter 
Quote:
Originally Posted by oxgon View Post

Just got a 3570K and I have a H100. Able to OC to 4.5 at CPU PLL 1.709v and Turbo Voltage: +0.004v.


The thing is I can not get up to 46 for a 4.6. I put up the PLL and TV and get BSOD. Should I increasing only one or the other? How far can I put TV +?

Thanks for any help!

Leave the PLL alone and keep upping the TV. You need to check the voltage during prime95 and make sure it never says anything higher than 1.55v.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*