Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*
New Posts  All Forums:Forum Nav:

Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition* - Page 293

Poll Results: Was this guide helpful?

Poll expired: Oct 17, 2012  
  • 80% (237)
    Yes (and I DO have an ASRock motherboard).
  • 15% (45)
    Yes (but I DO NOT have an ASRock motherboard).
  • 2% (7)
    No (and I DO have an ASRock motherboard).
  • 2% (7)
    No (but I DO NOT have an ASRock motherboard).
296 Total Votes  
post #2921 of 9534
Quote:
Originally Posted by eXultanCe View Post

I think I will try just increasing turbo voltage over night since I haven't touched CPU PLL yet. And if I end up crashing during the prime again, I'll just decrease a multiplier. I don't feel comfortable enough to mess with more than just the turbo and multiplier right now. Maybe in the future I won't be worried about ******* it up.

But like you said, I'll make sure I check on the test for about an hour or so, just to see if temps are going too high.

And once again, thank you smile.gif

Ok no problem...yeah better safe than sorry! K well good luck and hopefully it'll be stable let me know how it goes thumb.gif
post #2922 of 9534
Why is it that when I'm testing with Prime95 I never experienced any failed workers? When my OC is unstable, it just BSODs with 101 error code. I thoihjt when I'm nearing stability I should experience failed workers instead of BSOD?
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Asus P8Z68-V/GEN3 EVGA GTX 1080 Ti FTW3 2x8GB G.Skill Trident X (F3-2400C10D-16GTX) @ 2... 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Samsung Spinpoint F3 1TB CPU: Swiftech H220-X Windows 10 x64 Enterprise 
MonitorKeyboardPowerCase
Dell S2716DG Ducky Shine 3 DK9008 MX Brown and Red LED Seasonic P-760 SS-760XP2 Cooler Master HAF 922 
MouseMouse PadAudioAudio
Roccat Savu Steelseries QCK Mass Edifier HCS2330 2.1 Speaker System (using Onboa... HyperX Cloud Revolver Gaming Headset 
Other
APC BR1500GI UPS 
  hide details  
Reply
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Asus P8Z68-V/GEN3 EVGA GTX 1080 Ti FTW3 2x8GB G.Skill Trident X (F3-2400C10D-16GTX) @ 2... 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Samsung Spinpoint F3 1TB CPU: Swiftech H220-X Windows 10 x64 Enterprise 
MonitorKeyboardPowerCase
Dell S2716DG Ducky Shine 3 DK9008 MX Brown and Red LED Seasonic P-760 SS-760XP2 Cooler Master HAF 922 
MouseMouse PadAudioAudio
Roccat Savu Steelseries QCK Mass Edifier HCS2330 2.1 Speaker System (using Onboa... HyperX Cloud Revolver Gaming Headset 
Other
APC BR1500GI UPS 
  hide details  
Reply
post #2923 of 9534
Why is it that when I'm testing with Prime95 I never experienced any failed workers? When my OC is unstable, it just BSODs with 101 error code. I thoihjt when I'm nearing stability I should experience failed workers instead of BSOD?
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Asus P8Z68-V/GEN3 EVGA GTX 1080 Ti FTW3 2x8GB G.Skill Trident X (F3-2400C10D-16GTX) @ 2... 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Samsung Spinpoint F3 1TB CPU: Swiftech H220-X Windows 10 x64 Enterprise 
MonitorKeyboardPowerCase
Dell S2716DG Ducky Shine 3 DK9008 MX Brown and Red LED Seasonic P-760 SS-760XP2 Cooler Master HAF 922 
MouseMouse PadAudioAudio
Roccat Savu Steelseries QCK Mass Edifier HCS2330 2.1 Speaker System (using Onboa... HyperX Cloud Revolver Gaming Headset 
Other
APC BR1500GI UPS 
  hide details  
Reply
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Asus P8Z68-V/GEN3 EVGA GTX 1080 Ti FTW3 2x8GB G.Skill Trident X (F3-2400C10D-16GTX) @ 2... 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Samsung Spinpoint F3 1TB CPU: Swiftech H220-X Windows 10 x64 Enterprise 
MonitorKeyboardPowerCase
Dell S2716DG Ducky Shine 3 DK9008 MX Brown and Red LED Seasonic P-760 SS-760XP2 Cooler Master HAF 922 
MouseMouse PadAudioAudio
Roccat Savu Steelseries QCK Mass Edifier HCS2330 2.1 Speaker System (using Onboa... HyperX Cloud Revolver Gaming Headset 
Other
APC BR1500GI UPS 
  hide details  
Reply
post #2924 of 9534
Quote:
Originally Posted by kevindd992002 View Post

Why is it that when I'm testing with Prime95 I never experienced any failed workers? When my OC is unstable, it just BSODs with 101 error code. I thoihjt when I'm nearing stability I should experience failed workers instead of BSOD?

still means youre unstable, and need to up vcore,
but youre right, when prime runs, and you go from bsod to worker stopping,
and then the time it takes for the worker to stop, the longer it takes, the closer you are to stable
could mean youre getting closer to stability, but its not written in stone smile.gif
i even saw peeps having worker stopped, upped vcore, and get bsod later on ..lol
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #2925 of 9534
Quote:
Originally Posted by VonDutch View Post

still means youre unstable, and need to up vcore,
but youre right, when prime runs, and you go from bsod to worker stopping,
and then the time it takes for the worker to stop, the longer it takes, the closer you are to stable
could mean youre getting closer to stability, but its not written in stone smile.gif
i even saw peeps having worker stopped, upped vcore, and get bsod later on ..lol

Yeah, so it's but normal for me to experience only 101 BSODs and never workers stopping?
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Asus P8Z68-V/GEN3 EVGA GTX 1080 Ti FTW3 2x8GB G.Skill Trident X (F3-2400C10D-16GTX) @ 2... 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Samsung Spinpoint F3 1TB CPU: Swiftech H220-X Windows 10 x64 Enterprise 
MonitorKeyboardPowerCase
Dell S2716DG Ducky Shine 3 DK9008 MX Brown and Red LED Seasonic P-760 SS-760XP2 Cooler Master HAF 922 
MouseMouse PadAudioAudio
Roccat Savu Steelseries QCK Mass Edifier HCS2330 2.1 Speaker System (using Onboa... HyperX Cloud Revolver Gaming Headset 
Other
APC BR1500GI UPS 
  hide details  
Reply
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Asus P8Z68-V/GEN3 EVGA GTX 1080 Ti FTW3 2x8GB G.Skill Trident X (F3-2400C10D-16GTX) @ 2... 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Samsung Spinpoint F3 1TB CPU: Swiftech H220-X Windows 10 x64 Enterprise 
MonitorKeyboardPowerCase
Dell S2716DG Ducky Shine 3 DK9008 MX Brown and Red LED Seasonic P-760 SS-760XP2 Cooler Master HAF 922 
MouseMouse PadAudioAudio
Roccat Savu Steelseries QCK Mass Edifier HCS2330 2.1 Speaker System (using Onboa... HyperX Cloud Revolver Gaming Headset 
Other
APC BR1500GI UPS 
  hide details  
Reply
post #2926 of 9534
Quote:
Originally Posted by kevindd992002 View Post

Yeah, so it's but normal for me to experience only 101 BSODs and never workers stopping?

what ive learned so far in this world of ocing, that anything goes, when it comes to , whats normal..
did you get to the point where the bsod's stopped, after upping vcore enough?
or is it like, it stops, and youre stable from that point on?
i think there should be a kind of borderline, where bsod stops,
and when its still not stable, you run into other issues..
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #2927 of 9534
Quote:
Originally Posted by VonDutch View Post

what ive learned so far in this world of ocing, that anything goes, when it comes to , whats normal..
did you get to the point where the bsod's stopped, after upping vcore enough?
or is it like, it stops, and youre stable from that point on?
i think there should be a kind of borderline, where bsod stops,
and when its still not stable, you run into other issues..

Yeah, I understand what you mean. I understand how to get stable and yes I did get stable after increasing the vcore a few notches. I just thought that I should be expecting workers stopping, is all smile.gif
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Asus P8Z68-V/GEN3 EVGA GTX 1080 Ti FTW3 2x8GB G.Skill Trident X (F3-2400C10D-16GTX) @ 2... 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Samsung Spinpoint F3 1TB CPU: Swiftech H220-X Windows 10 x64 Enterprise 
MonitorKeyboardPowerCase
Dell S2716DG Ducky Shine 3 DK9008 MX Brown and Red LED Seasonic P-760 SS-760XP2 Cooler Master HAF 922 
MouseMouse PadAudioAudio
Roccat Savu Steelseries QCK Mass Edifier HCS2330 2.1 Speaker System (using Onboa... HyperX Cloud Revolver Gaming Headset 
Other
APC BR1500GI UPS 
  hide details  
Reply
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Asus P8Z68-V/GEN3 EVGA GTX 1080 Ti FTW3 2x8GB G.Skill Trident X (F3-2400C10D-16GTX) @ 2... 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Samsung Spinpoint F3 1TB CPU: Swiftech H220-X Windows 10 x64 Enterprise 
MonitorKeyboardPowerCase
Dell S2716DG Ducky Shine 3 DK9008 MX Brown and Red LED Seasonic P-760 SS-760XP2 Cooler Master HAF 922 
MouseMouse PadAudioAudio
Roccat Savu Steelseries QCK Mass Edifier HCS2330 2.1 Speaker System (using Onboa... HyperX Cloud Revolver Gaming Headset 
Other
APC BR1500GI UPS 
  hide details  
Reply
post #2928 of 9534
Quote:
Originally Posted by kevindd992002 View Post

Yeah, I understand what you mean. I understand how to get stable and yes I did get stable after increasing the vcore a few notches. I just thought that I should be expecting workers stopping, is all smile.gif

you could try lower it again with 1 notch, and another, see what happens, if first you can get a worker to stop, before bsod ...lol biggrin.gif
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #2929 of 9534
Quote:
Originally Posted by VonDutch View Post

you could try lower it again with 1 notch, and another, see what happens, if first you can get a worker to stop, before bsod ...lol biggrin.gif

It doesn't. I've invested several months in tinkering with my OC so I'm pretty sure that I don't sre any stopped workers no matter what.
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Asus P8Z68-V/GEN3 EVGA GTX 1080 Ti FTW3 2x8GB G.Skill Trident X (F3-2400C10D-16GTX) @ 2... 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Samsung Spinpoint F3 1TB CPU: Swiftech H220-X Windows 10 x64 Enterprise 
MonitorKeyboardPowerCase
Dell S2716DG Ducky Shine 3 DK9008 MX Brown and Red LED Seasonic P-760 SS-760XP2 Cooler Master HAF 922 
MouseMouse PadAudioAudio
Roccat Savu Steelseries QCK Mass Edifier HCS2330 2.1 Speaker System (using Onboa... HyperX Cloud Revolver Gaming Headset 
Other
APC BR1500GI UPS 
  hide details  
Reply
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Asus P8Z68-V/GEN3 EVGA GTX 1080 Ti FTW3 2x8GB G.Skill Trident X (F3-2400C10D-16GTX) @ 2... 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Samsung Spinpoint F3 1TB CPU: Swiftech H220-X Windows 10 x64 Enterprise 
MonitorKeyboardPowerCase
Dell S2716DG Ducky Shine 3 DK9008 MX Brown and Red LED Seasonic P-760 SS-760XP2 Cooler Master HAF 922 
MouseMouse PadAudioAudio
Roccat Savu Steelseries QCK Mass Edifier HCS2330 2.1 Speaker System (using Onboa... HyperX Cloud Revolver Gaming Headset 
Other
APC BR1500GI UPS 
  hide details  
Reply
post #2930 of 9534
Quote:
Originally Posted by VonDutch View Post

still means youre unstable, and need to up vcore,
but youre right, when prime runs, and you go from bsod to worker stopping,
and then the time it takes for the worker to stop, the longer it takes, the closer you are to stable
could mean youre getting closer to stability, but its not written in stone smile.gif
i even saw peeps having worker stopped, upped vcore, and get bsod later on ..lol

Quote:
Originally Posted by kevindd992002 View Post

It doesn't. I've invested several months in tinkering with my OC so I'm pretty sure that I don't sre any stopped workers no matter what.

like i said in my first response,
i always thought the same, prime runs, you get a bsod, you up vcore, rerun, if you get closer to stable,
a worker starts failing, up vcore, rerun, it takes worker more hours before it stops, up vcore again, your workers run all the way,

but in the 5 months im here on this forum, i saw to many different things happening , to say its rule.. for one, you as a example smile.gif
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*