Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*
New Posts  All Forums:Forum Nav:

Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition* - Page 438

Poll Results: Was this guide helpful?

Poll expired: Oct 17, 2012  
  • 80% (237)
    Yes (and I DO have an ASRock motherboard).
  • 15% (45)
    Yes (but I DO NOT have an ASRock motherboard).
  • 2% (7)
    No (and I DO have an ASRock motherboard).
  • 2% (7)
    No (but I DO NOT have an ASRock motherboard).
296 Total Votes  
post #4371 of 9534
Is it still crashing with the ram downclocked? 2600K by default supports 1066/1333. Anything higher is considered overclocking its IMC. Ram clocked @ 2133 is a pretty big overclock for its IMC. I believe this is one of the advantages of IB CPU's, that their IMC's are better. VTT should be within .5 of dram voltage.
Edited by wholeeo - 3/11/13 at 3:02pm
post #4372 of 9534
Could anybody take a look at these screenshots? My peak load hits 1.275v, during prime steady 1.254-1.265v and lowest 1.000.




post #4373 of 9534
Quote:
Originally Posted by error311 View Post

Could anybody take a look at these screenshots? My peak load hits 1.275v, during prime steady 1.254-1.265v and lowest 1.000.

Looks good, what are your CPU Advanced Config settings? Are you stable?
post #4374 of 9534
c3 and c6 state are disabled, I left Package C state as Auto. Yes this is stable for me any lower I get whea in event viewer. I was just worried about having to use an negative offset.
post #4375 of 9534
Quote:
Originally Posted by wholeeo View Post

Is it still crashing with the ram downclocked? 2600K by default supports 1066/1333. Anything higher is considered overclocking its IMC. Ram clocked @ 2133 is a pretty big overclock for its IMC. I believe this is one of the advantages of IB CPU's, that their IMC's are better. VTT should be within .5 of dram voltage.

I just updated my sig. I'm actually running a 3770k IB. So then I should be fine at 2133 no?

So I should try a VTT of 1.6v? Since the ram is at 1.65?
Gaming Rig
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3770k @ 4.8GHz w/ 1.43v ASRock z77 Extreme 6 HD7970 @ 1270/1800 HD7970 @ 1270/1800 
RAMHard DriveHard DriveHard Drive
16GB G. Skill Ripjaws Z 9-11-12-28 OCZ Vertex 3 120GB Caviar Blue 1.0TB WD10EZEX DeskStar 1.5TB HDD 
Hard DriveCoolingCoolingOS
Caviar Blue 1.0TB WD10EZEX Raystorm Chrome XSPC CPU Block Swiftech Komodo 7970 Water Blocks Windows 8 64bit Ultimate 
MonitorPowerCaseAudio
Panasonic 54in VT 25 Corsair Fatl1ty 1000 watt PSU Corsair 800D Onkyo-NR-1008 
Audio
Energy CF70 towers, Energy CLR center, and Ener... 
  hide details  
Reply
Gaming Rig
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3770k @ 4.8GHz w/ 1.43v ASRock z77 Extreme 6 HD7970 @ 1270/1800 HD7970 @ 1270/1800 
RAMHard DriveHard DriveHard Drive
16GB G. Skill Ripjaws Z 9-11-12-28 OCZ Vertex 3 120GB Caviar Blue 1.0TB WD10EZEX DeskStar 1.5TB HDD 
Hard DriveCoolingCoolingOS
Caviar Blue 1.0TB WD10EZEX Raystorm Chrome XSPC CPU Block Swiftech Komodo 7970 Water Blocks Windows 8 64bit Ultimate 
MonitorPowerCaseAudio
Panasonic 54in VT 25 Corsair Fatl1ty 1000 watt PSU Corsair 800D Onkyo-NR-1008 
Audio
Energy CF70 towers, Energy CLR center, and Ener... 
  hide details  
Reply
post #4376 of 9534
Quote:
Originally Posted by Derko1 View Post

I just updated my sig. I'm actually running a 3770k IB. So then I should be fine at 2133 no?

So I should try a VTT of 1.6v? Since the ram is at 1.65?

No. -.5 would be 1.15 which is what I see has been auto set in your bios. You should be fine with it set to 2133 but I'd still keep it @ 1600 while testing your CPU overclock.
post #4377 of 9534
Quote:
Originally Posted by wholeeo View Post

No. -.5 would be 1.15 which is what I see has been auto set in your bios. You should be fine with it set to 2133 but I'd still keep it @ 1600 while testing your CPU overclock.

That's strange... I just checked my VTT again and it's at 1.076v. I'm going to try 1.15 and see if there's any difference. I may just have to settle for 4.6ghz after all... crappy chip. frown.gif
Gaming Rig
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3770k @ 4.8GHz w/ 1.43v ASRock z77 Extreme 6 HD7970 @ 1270/1800 HD7970 @ 1270/1800 
RAMHard DriveHard DriveHard Drive
16GB G. Skill Ripjaws Z 9-11-12-28 OCZ Vertex 3 120GB Caviar Blue 1.0TB WD10EZEX DeskStar 1.5TB HDD 
Hard DriveCoolingCoolingOS
Caviar Blue 1.0TB WD10EZEX Raystorm Chrome XSPC CPU Block Swiftech Komodo 7970 Water Blocks Windows 8 64bit Ultimate 
MonitorPowerCaseAudio
Panasonic 54in VT 25 Corsair Fatl1ty 1000 watt PSU Corsair 800D Onkyo-NR-1008 
Audio
Energy CF70 towers, Energy CLR center, and Ener... 
  hide details  
Reply
Gaming Rig
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3770k @ 4.8GHz w/ 1.43v ASRock z77 Extreme 6 HD7970 @ 1270/1800 HD7970 @ 1270/1800 
RAMHard DriveHard DriveHard Drive
16GB G. Skill Ripjaws Z 9-11-12-28 OCZ Vertex 3 120GB Caviar Blue 1.0TB WD10EZEX DeskStar 1.5TB HDD 
Hard DriveCoolingCoolingOS
Caviar Blue 1.0TB WD10EZEX Raystorm Chrome XSPC CPU Block Swiftech Komodo 7970 Water Blocks Windows 8 64bit Ultimate 
MonitorPowerCaseAudio
Panasonic 54in VT 25 Corsair Fatl1ty 1000 watt PSU Corsair 800D Onkyo-NR-1008 
Audio
Energy CF70 towers, Energy CLR center, and Ener... 
  hide details  
Reply
post #4378 of 9534
Quote:
Originally Posted by error311 View Post

c3 and c6 state are disabled, I left Package C state as Auto. Yes this is stable for me any lower I get whea in event viewer. I was just worried about having to use an negative offset.

Don't worry about the neg offset. I myself run a -.075 offset in order to get my idle clocks down to -.848.
Quote:
Originally Posted by Derko1 View Post

That's strange... I just checked my VTT again and it's at 1.076v. I'm going to try 1.15 and see if there's any difference. I may just have to settle for 4.6ghz after all... crappy chip. frown.gif

Perhaps the auto settings readjusted themselves when you downclocked the ram.
post #4379 of 9534
Quote:
Originally Posted by wholeeo View Post

Don't worry about the neg offset. I myself run a -.075 offset in order to get my idle clocks down to -.848.
Perhaps the auto settings readjusted themselves when you downclocked the ram.

OKay - you do need to set the ram voltage manually to the XMP rated amount. I wud not leave it on auto. What are your exact settings for >= 1h p95 @46x?
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
post #4380 of 9534
Well I am upping the vcore again... it seems to be good so far. I guess since I found the best PLL voltage, matching it with going up in vcore might work. I'll report back in a few hours I hope. thumb.gif
Gaming Rig
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3770k @ 4.8GHz w/ 1.43v ASRock z77 Extreme 6 HD7970 @ 1270/1800 HD7970 @ 1270/1800 
RAMHard DriveHard DriveHard Drive
16GB G. Skill Ripjaws Z 9-11-12-28 OCZ Vertex 3 120GB Caviar Blue 1.0TB WD10EZEX DeskStar 1.5TB HDD 
Hard DriveCoolingCoolingOS
Caviar Blue 1.0TB WD10EZEX Raystorm Chrome XSPC CPU Block Swiftech Komodo 7970 Water Blocks Windows 8 64bit Ultimate 
MonitorPowerCaseAudio
Panasonic 54in VT 25 Corsair Fatl1ty 1000 watt PSU Corsair 800D Onkyo-NR-1008 
Audio
Energy CF70 towers, Energy CLR center, and Ener... 
  hide details  
Reply
Gaming Rig
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3770k @ 4.8GHz w/ 1.43v ASRock z77 Extreme 6 HD7970 @ 1270/1800 HD7970 @ 1270/1800 
RAMHard DriveHard DriveHard Drive
16GB G. Skill Ripjaws Z 9-11-12-28 OCZ Vertex 3 120GB Caviar Blue 1.0TB WD10EZEX DeskStar 1.5TB HDD 
Hard DriveCoolingCoolingOS
Caviar Blue 1.0TB WD10EZEX Raystorm Chrome XSPC CPU Block Swiftech Komodo 7970 Water Blocks Windows 8 64bit Ultimate 
MonitorPowerCaseAudio
Panasonic 54in VT 25 Corsair Fatl1ty 1000 watt PSU Corsair 800D Onkyo-NR-1008 
Audio
Energy CF70 towers, Energy CLR center, and Ener... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*