So since I discovered that my board was off .1v when using the settings in this guide (great guide by the way) I decided to see how much it would be off with everything on auto. So all I did was type in 46 for all cores and booted. CPU-z reads 1.296 (I usually need 1.45v real voltage to run 4.6Ghz) so I figure my DMM would read 1.396, but instead it reads 1.304v. So it is only .008 off now. Why is this? What settings would cause it to be off by a whole .1v???
post #4551 of 9601
3/13/13 at 5:44pm