Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*
New Posts  All Forums:Forum Nav:

Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition* - Page 494

Poll Results: Was this guide helpful?

Poll expired: Oct 17, 2012  
  • 80% (237)
    Yes (and I DO have an ASRock motherboard).
  • 15% (45)
    Yes (but I DO NOT have an ASRock motherboard).
  • 2% (7)
    No (and I DO have an ASRock motherboard).
  • 2% (7)
    No (but I DO NOT have an ASRock motherboard).
296 Total Votes  
post #4931 of 9531
He said the WHEA's appeared between 10-12 so as for the test, they happened between 1.5-3.5 hours into the total 10.5 hours of run time, soooo it's safe to say they happened near the beginning of the test. What sort of difference does it make beginning than late? Also, with the time stamps, is it possible to pin-point what tests could have thrown out the WHEA errors? Or does that even matter?
Storm Trooper
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3770k @ 4.6 Stable Gigabyte GA-Z77X-UD5H XFX Double D HD7870 XFX Double D HD7870 
RAMHard DriveOptical DriveCooling
G.Skill Sniper Series 1866 Samsung 830 128GB LiteOn Blu-Ray Hyper 212 Evo 
OSMonitorKeyboardPower
Win7 x64 Ultimate ASUS VS239H-P 23" Sidewinder X4 Capstone 650-M 
CaseMouseMouse PadOther
Storm Stryker Storm Xornet Black Icemat Black NZXT Aperture M 5.25 Bay Multi-Media Mesh Style... 
Other
NZXT Sentry Mesh Fan Controller w/ Five 30W Cha... 
  hide details  
Reply
Storm Trooper
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3770k @ 4.6 Stable Gigabyte GA-Z77X-UD5H XFX Double D HD7870 XFX Double D HD7870 
RAMHard DriveOptical DriveCooling
G.Skill Sniper Series 1866 Samsung 830 128GB LiteOn Blu-Ray Hyper 212 Evo 
OSMonitorKeyboardPower
Win7 x64 Ultimate ASUS VS239H-P 23" Sidewinder X4 Capstone 650-M 
CaseMouseMouse PadOther
Storm Stryker Storm Xornet Black Icemat Black NZXT Aperture M 5.25 Bay Multi-Media Mesh Style... 
Other
NZXT Sentry Mesh Fan Controller w/ Five 30W Cha... 
  hide details  
Reply
post #4932 of 9531
Quote:
Originally Posted by SilentAD View Post

He said the WHEA's appeared between 10-12 so as for the test, they happened between 1.5-3.5 hours into the total 10.5 hours of run time, soooo it's safe to say they happened near the beginning of the test. What sort of difference does it make beginning than late? Also, with the time stamps, is it possible to pin-point what tests could have thrown out the WHEA errors? Or does that even matter?

I was getting at... if the whea were late, well then it's several hours stable. for a gaming rig - that's fine. the only time I do 12-24h p95 (and then add IBT) is for really fault-intolerant uses/applications (and in those systems, I try to use 4 disk raid 10 + an online spare, raid 5, or at least raid 1).
I wouldn't consider recreational gaming a fault-intolerant use.
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
post #4933 of 9531
Quote:
Originally Posted by Jpmboy View Post

I don't blame you for switching... AsRock has just ignored this problem on their z77 4 and 6 boards.

Ok so after coming to the sad conclusion that I wont be able to delid my cpu (I might get another one some time down the road) and just replacing the extreme4 with the ud5h.

First thing I did after installing all drivers, etc, etc. Was to check what CPUZ and OHM reported back for vcore and compare it to the boards reading, which by the way, having the dedicated pads ON the board make it ALOT easier thumb.gif

CPUZ reading: 1.116v

DMM from board: 1.116-1.118v

I'm VERY satisfied with this. Now to search the forums for a gigabyte overclocking guide and I'll be good to go with the overclocking process again.

Edit: Found a guide that just so happens to use a GB board: http://www.overclock.net/t/1247413/ivy-bridge-overclocking-guide-with-ln2-guide-at-the-end/0_20

Time to get OC'ing again.
Edited by SilentAD - 3/24/13 at 5:16pm
Storm Trooper
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3770k @ 4.6 Stable Gigabyte GA-Z77X-UD5H XFX Double D HD7870 XFX Double D HD7870 
RAMHard DriveOptical DriveCooling
G.Skill Sniper Series 1866 Samsung 830 128GB LiteOn Blu-Ray Hyper 212 Evo 
OSMonitorKeyboardPower
Win7 x64 Ultimate ASUS VS239H-P 23" Sidewinder X4 Capstone 650-M 
CaseMouseMouse PadOther
Storm Stryker Storm Xornet Black Icemat Black NZXT Aperture M 5.25 Bay Multi-Media Mesh Style... 
Other
NZXT Sentry Mesh Fan Controller w/ Five 30W Cha... 
  hide details  
Reply
Storm Trooper
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3770k @ 4.6 Stable Gigabyte GA-Z77X-UD5H XFX Double D HD7870 XFX Double D HD7870 
RAMHard DriveOptical DriveCooling
G.Skill Sniper Series 1866 Samsung 830 128GB LiteOn Blu-Ray Hyper 212 Evo 
OSMonitorKeyboardPower
Win7 x64 Ultimate ASUS VS239H-P 23" Sidewinder X4 Capstone 650-M 
CaseMouseMouse PadOther
Storm Stryker Storm Xornet Black Icemat Black NZXT Aperture M 5.25 Bay Multi-Media Mesh Style... 
Other
NZXT Sentry Mesh Fan Controller w/ Five 30W Cha... 
  hide details  
Reply
post #4934 of 9531
Quote:
Originally Posted by SilentAD View Post

Ok so after coming to the sad conclusion that I wont be able to delid my cpu (I might get another one some time down the road) and just replacing the extreme4 with the ud5h.

First thing I did after installing all drivers, etc, etc. Was to check what CPUZ and OHM reported back for vcore and compare it to the boards reading, which by the way, having the dedicated pads ON the board make it ALOT easier thumb.gif

CPUZ reading: 1.116v

DMM from board: 1.116-1.118v

I'm VERY satisfied with this. Now to search the forums for a gigabyte overclocking guide and I'll be good to go with the overclocking process again.

Edit: Found a guide that just so happens to use a GB board: http://www.overclock.net/t/1247413/ivy-bridge-overclocking-guide-with-ln2-guide-at-the-end/0_20

Time to get OC'ing again.



If you would be so kind as to test at a higher clock and VCore for the voltage variation I would be much obliged. Reason I ask is that at 1.16ish on LLC4, my ext4 reads correctly, its not until I start pushing higher volts and higher clocks that I get the extra voltage. I assume you will be pushing it further than 1.16, when/if you get in the 1.300+ range can you check again? My goal is to find out if it is just the ext4/ext6 that have the voltage issues, but since I don't have any other boards to check I have to rely on the kindness of other people for my data.

Thanks,
Kyle
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
post #4935 of 9531
Quote:
Originally Posted by inedenimadam View Post

If you would be so kind as to test at a higher clock and VCore for the voltage variation I would be much obliged. Reason I ask is that at 1.16ish on LLC4, my ext4 reads correctly, its not until I start pushing higher volts and higher clocks that I get the extra voltage. I assume you will be pushing it further than 1.16, when/if you get in the 1.300+ range can you check again? My goal is to find out if it is just the ext4/ext6 that have the voltage issues, but since I don't have any other boards to check I have to rely on the kindness of other people for my data.

Thanks,
Kyle

Oh I most certainly will be pushing it farther, no those readings were at stock settings and Idle.

Just did a quick run of p95 to check vcore under load (again, stock frequencies)

LLC: Turbo
CPUZ: 1.308v
DMM: 1.318v

Again, I'll push it up to 43-45 here soon and get more readings for you.

Sincerely,
Kyle
Storm Trooper
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3770k @ 4.6 Stable Gigabyte GA-Z77X-UD5H XFX Double D HD7870 XFX Double D HD7870 
RAMHard DriveOptical DriveCooling
G.Skill Sniper Series 1866 Samsung 830 128GB LiteOn Blu-Ray Hyper 212 Evo 
OSMonitorKeyboardPower
Win7 x64 Ultimate ASUS VS239H-P 23" Sidewinder X4 Capstone 650-M 
CaseMouseMouse PadOther
Storm Stryker Storm Xornet Black Icemat Black NZXT Aperture M 5.25 Bay Multi-Media Mesh Style... 
Other
NZXT Sentry Mesh Fan Controller w/ Five 30W Cha... 
  hide details  
Reply
Storm Trooper
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3770k @ 4.6 Stable Gigabyte GA-Z77X-UD5H XFX Double D HD7870 XFX Double D HD7870 
RAMHard DriveOptical DriveCooling
G.Skill Sniper Series 1866 Samsung 830 128GB LiteOn Blu-Ray Hyper 212 Evo 
OSMonitorKeyboardPower
Win7 x64 Ultimate ASUS VS239H-P 23" Sidewinder X4 Capstone 650-M 
CaseMouseMouse PadOther
Storm Stryker Storm Xornet Black Icemat Black NZXT Aperture M 5.25 Bay Multi-Media Mesh Style... 
Other
NZXT Sentry Mesh Fan Controller w/ Five 30W Cha... 
  hide details  
Reply
post #4936 of 9531
Quote:
Originally Posted by inedenimadam View Post

If you would be so kind as to test at a higher clock and VCore for the voltage variation I would be much obliged. Reason I ask is that at 1.16ish on LLC4, my ext4 reads correctly, its not until I start pushing higher volts and higher clocks that I get the extra voltage. I assume you will be pushing it further than 1.16, when/if you get in the 1.300+ range can you check again? My goal is to find out if it is just the ext4/ext6 that have the voltage issues, but since I don't have any other boards to check I have to rely on the kindness of other people for my data.

Thanks,
Kyle

Okay my fellow Kyle, here are the results from just quick tests (not testing for stability, just for the voltage differences from ohm/cpuz compared to dmm)

Dynamic Vcore +0.005v
LLC: cpuz dmm difference

Extreme: 1.320 1.337 +17mV
Turbo: 1.320 1.334 +14mV
High: 1.308 1.319 +11mV
Medium: 1.296 1.303 +7mV

As I start actually overclocking towards 45 (and POSSIBLY 46), I'll do all of these voltage tests each step of the way. But this wont be for maybe a couple days since my Senior Project to get my Degree takes priority over my computers CPU clock speed wink.gif LoL
Storm Trooper
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3770k @ 4.6 Stable Gigabyte GA-Z77X-UD5H XFX Double D HD7870 XFX Double D HD7870 
RAMHard DriveOptical DriveCooling
G.Skill Sniper Series 1866 Samsung 830 128GB LiteOn Blu-Ray Hyper 212 Evo 
OSMonitorKeyboardPower
Win7 x64 Ultimate ASUS VS239H-P 23" Sidewinder X4 Capstone 650-M 
CaseMouseMouse PadOther
Storm Stryker Storm Xornet Black Icemat Black NZXT Aperture M 5.25 Bay Multi-Media Mesh Style... 
Other
NZXT Sentry Mesh Fan Controller w/ Five 30W Cha... 
  hide details  
Reply
Storm Trooper
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3770k @ 4.6 Stable Gigabyte GA-Z77X-UD5H XFX Double D HD7870 XFX Double D HD7870 
RAMHard DriveOptical DriveCooling
G.Skill Sniper Series 1866 Samsung 830 128GB LiteOn Blu-Ray Hyper 212 Evo 
OSMonitorKeyboardPower
Win7 x64 Ultimate ASUS VS239H-P 23" Sidewinder X4 Capstone 650-M 
CaseMouseMouse PadOther
Storm Stryker Storm Xornet Black Icemat Black NZXT Aperture M 5.25 Bay Multi-Media Mesh Style... 
Other
NZXT Sentry Mesh Fan Controller w/ Five 30W Cha... 
  hide details  
Reply
post #4937 of 9531
Quote:
Originally Posted by SilentAD View Post

Okay my fellow Kyle, here are the results from just quick tests (not testing for stability, just for the voltage differences from ohm/cpuz compared to dmm)

Dynamic Vcore +0.005v
LLC: cpuz dmm difference

Extreme: 1.320 1.337 +17mV
Turbo: 1.320 1.334 +14mV
High: 1.308 1.319 +11mV
Medium: 1.296 1.303 +7mV

As I start actually overclocking towards 45 (and POSSIBLY 46), I'll do all of these voltage tests each step of the way. But this wont be for maybe a couple days since my Senior Project to get my Degree takes priority over my computers CPU clock speed wink.gif LoL

Thanks
+Rep for posting those
Well, .017 being the furthest off is less than 1/4 of what variation I have produced on my own machine, but is still interesting. It does confirm my suspicion that the LLC will affect unreported voltage in a scaling manner. Cant say that it disproves my suspicion that ALL boards do it, but certainly no where near what we see with the ext4/6. I really wish some other ASRock owner would take these same type of measurements at the higher VCore and LLC...I am curious if this affects ALL or just some of their mobos
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
post #4938 of 9531
Quote:
Originally Posted by SilentAD View Post

Ok so after coming to the sad conclusion that I wont be able to delid my cpu (I might get another one some time down the road) and just replacing the extreme4 with the ud5h.
First thing I did after installing all drivers, etc, etc. Was to check what CPUZ and OHM reported back for vcore and compare it to the boards reading, which by the way, having the dedicated pads ON the board make it ALOT easier thumb.gif
CPUZ reading: 1.116v
DMM from board: 1.116-1.118v
I'm VERY satisfied with this. Now to search the forums for a gigabyte overclocking guide and I'll be good to go with the overclocking process again.
Edit: Found a guide that just so happens to use a GB board: http://www.overclock.net/t/1247413/ivy-bridge-overclocking-guide-with-ln2-guide-at-the-end/0_20
Time to get OC'ing again.

Yup, that's Steve B's thread (sin0822). The guide is also at sinhardware.com.
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
post #4939 of 9531
Quote:
Originally Posted by Jpmboy View Post

well, that's actually pretty good. were the whea early or late? if they occurred at the same time as a worker failure, you are VERY close. For some it would be enough at 1h.

The WHEA's were early on, within the first 2 hours of testing. P95 didn't crash until 08:37 the following morning (A total of 10 hours 37 minutes testing)

I tried switching Turbo to auto but had more stability issues. I'm happy with leaving it on auto running at 4.6GHz

I'll probably just bump the offset another notch and see how it goes smile.gif
post #4940 of 9531
After installing some borrowed RAM while mine is en route to Corsair...I have discovered that my overclock actually requires less than what I thought, as many times I bumped the voltage because of errors that were in fact caused by the memory module. Also, my system in general is a whole lot more stable and a great deal faster with a fresh install of Windows8

Anybody have opinions of OCCT? It seems to kick back errors quicker than P95, but doesn't heat the CPU up as much. I know it wont get me a qualifying run for any of these overclock clubs, but I really like the real time charting, being able to set a temperature threshold that will stop the testing, and it pops out time elapsed charts of every single thing you can ask for...why is everybody so stuck on P95? Am I missing something?
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*