Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*
New Posts  All Forums:Forum Nav:

Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition* - Page 507

Poll Results: Was this guide helpful?

Poll expired: Oct 17, 2012  
  • 80% (237)
    Yes (and I DO have an ASRock motherboard).
  • 15% (45)
    Yes (but I DO NOT have an ASRock motherboard).
  • 2% (7)
    No (and I DO have an ASRock motherboard).
  • 2% (7)
    No (but I DO NOT have an ASRock motherboard).
296 Total Votes  
post #5061 of 9565
Quote:
Originally Posted by Qlix View Post

I know how it SHOULD downclock tongue.gif it just never has. I always have my power managment **** set to high performance. Ill set it to balanced. but i hate sleep mode lol. So thats gotta go away

and my current settings are .004 turbo .005 multi.

edit: ok changing power options to balanced fixed the downclock.

Even on balanced you can still make it so the computer doesnt sleep. I have mine setup so it doesnt sleep either.

Ok so its lasted 15 min w/ a +0.005 offset and a +0.004 turbo? Ok well at least what ive seen from other members w/ ivy bridge, they are getting 45 stable around 1.25v or less and it looks like your at 1.32.

If you want to stay w/ 4.5ghz then you can set turbo to auto and start dipping into then negative offset to bring you full load vcore down. ( example -0.005 offset, -0.010...etc and find the lowest stable full load vcore for 4.5) Basically if you go for 4.5ghz offset will most likely support a good idle vcore and stable full load vcore and additional turbo voltage might not be needed.

Otherwise if you want to go for a higher multiplier you can but since your at the lowest positive offset (+0.005) you might still have to go into the negatives. It depends on what vcore you cpu needs at X multiplier.

You can get a rough estimate of what your chip might need for each multiplier by looking here.
http://www.overclock.net/t/1247869/official-the-ivy-bridge-stable-suicide-club-guides-voltages-temps-bios-templates-inc-spreadsheet

Let me know what multi you plan on going for but now your bios is set up correctly so its just a matter of using offset, turbo and multiplier.
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
post #5062 of 9565
Quote:
Originally Posted by Lucky 23 View Post

Even on balanced you can still make it so the computer doesnt sleep. I have mine setup so it doesnt sleep either.

Ok so its lasted 15 min w/ a +0.005 offset and a +0.004 turbo? Ok well at least what ive seen from other members w/ ivy bridge, they are getting 45 stable around 1.25v or less and it looks like your at 1.32.

If you want to stay w/ 4.5ghz then you can set turbo to auto and start dipping into then negative offset to bring you full load vcore down. ( example -0.005 offset, -0.010...etc and find the lowest stable full load vcore for 4.5) Basically if you go for 4.5ghz offset will most likely support a good idle vcore and stable full load vcore and additional turbo voltage might not be needed.

Otherwise if you want to go for a higher multiplier you can but since your at the lowest positive offset (+0.005) you might still have to go into the negatives. It depends on what vcore you cpu needs at X multiplier.

You can get a rough estimate of what your chip might need for each multiplier by looking here.
http://www.overclock.net/t/1247869/official-the-ivy-bridge-stable-suicide-club-guides-voltages-temps-bios-templates-inc-spreadsheet

Let me know what multi you plan on going for but now your bios is set up correctly so its just a matter of using offset, turbo and multiplier.


watching that list im 100% i can do 5gz ....looking at the people that did 5 and 4.8 ....i have alot of headroom to play with

i ran 5 for a bit at 1.4

im at Level 3 of the CLL ....should i do a different one for 5ghz?
    
CPUMotherboardGraphicsRAM
intel 6700k ASUS ROG MAXIMUS VIII HERO EVGA 1080 ti founders edition Trident Z 
Hard DriveCoolingOSMonitor
Sandisk Ultra 2  Noctua NH-D15 Windows 10 pro Asus PG279Q 
KeyboardPowerCaseMouse
Logitech 710+ Evga 1000w G3 Fractal Design  logitech g502 
Mouse Pad
Logitech G 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
intel 6700k ASUS ROG MAXIMUS VIII HERO EVGA 1080 ti founders edition Trident Z 
Hard DriveCoolingOSMonitor
Sandisk Ultra 2  Noctua NH-D15 Windows 10 pro Asus PG279Q 
KeyboardPowerCaseMouse
Logitech 710+ Evga 1000w G3 Fractal Design  logitech g502 
Mouse Pad
Logitech G 
  hide details  
Reply
post #5063 of 9565
Quote:
Originally Posted by Gerbacio View Post

watching that list im 100% i can do 5gz ....looking at the people that did 5 and 4.8 ....i have alot of headroom to play with

i ran 5 for a bit at 1.4

im at Level 3 of the CLL ....should i do a different one for 5ghz?

Soooo much better than your last chip! I want 5.0 too, but the temps....soon though.....
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
post #5064 of 9565
Double post!
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
post #5065 of 9565
Quote:
Originally Posted by Lucky 23 View Post

Even on balanced you can still make it so the computer doesnt sleep. I have mine setup so it doesnt sleep either.

Ok so its lasted 15 min w/ a +0.005 offset and a +0.004 turbo? Ok well at least what ive seen from other members w/ ivy bridge, they are getting 45 stable around 1.25v or less and it looks like your at 1.32.

If you want to stay w/ 4.5ghz then you can set turbo to auto and start dipping into then negative offset to bring you full load vcore down. ( example -0.005 offset, -0.010...etc and find the lowest stable full load vcore for 4.5) Basically if you go for 4.5ghz offset will most likely support a good idle vcore and stable full load vcore and additional turbo voltage might not be needed.

Otherwise if you want to go for a higher multiplier you can but since your at the lowest positive offset (+0.005) you might still have to go into the negatives. It depends on what vcore you cpu needs at X multiplier.

You can get a rough estimate of what your chip might need for each multiplier by looking here.
http://www.overclock.net/t/1247869/official-the-ivy-bridge-stable-suicide-club-guides-voltages-temps-bios-templates-inc-spreadsheet

Let me know what multi you plan on going for but now your bios is set up correctly so its just a matter of using offset, turbo and multiplier.

Ill be happy with 4.8, but if i can get higher thatd be awesome. Not gonna get my hopes up though.

edit: Ive got this other wierd thing happening when i try to reboot. Sometimes I wont get a POST message and it just boots straight into windows. Like it skips POST altogether. Ever seen this before?
Edited by Qlix - 3/28/13 at 9:43pm
post #5066 of 9565
Ok well your idle vcore is where you want it to be so you dont need to touch offset.

You will need to start taking up the multiplier and doing short runs in P95. If P95 fails you will want to increase turbo and then run P95 again. At 4.8ghz you might have to start messing w/ PLL so other members on here will have to give you advice on that.
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
post #5067 of 9565
Quote:
Originally Posted by Lucky 23 View Post

Ok well your idle vcore is where you want it to be so you dont need to touch offset.

You will need to start taking up the multiplier and doing short runs in P95. If P95 fails you will want to increase turbo and then run P95 again. At 4.8ghz you might have to start messing w/ PLL so other members on here will have to give you advice on that.
So pop the multi up 1, run P95, if i pass... do it again... fail up Turbo till it passes. Rinse repeat?

Is 10 minutes really enough to determine if i can move up? I know it doesnt prove 24/7 stability... but for trial and error purposes?
post #5068 of 9565
Also: Why is there such a huge difference between Core Temp's readings and HWmonitor's readings? Which one is correct?

post #5069 of 9565
Quote:
Originally Posted by Qlix View Post

So pop the multi up 1, run P95, if i pass... do it again... fail up Turbo till it passes. Rinse repeat?

Is 10 minutes really enough to determine if i can move up? I know it doesnt prove 24/7 stability... but for trial and error purposes?

Exactly.

I do short runs on P95 on Small fft to get an idea of how close i am. Then when your ready switch to custom blend like the guide says and just let it run. See if P95 can pass 8-12 hours

As for the temps, thats normal mine does the same thing except core 2 is my hot core and core 0 is the coolest
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
post #5070 of 9565
Quote:
Originally Posted by Lucky 23 View Post

Exactly.

I do short runs on P95 on Small fft to get an idea of how close i am. Then when your ready switch to custom blend like the guide says and just let it run. See if P95 can pass 8-12 hours

As for the temps, thats normal mine does the same thing except core 2 is my hot core and core 0 is the coolest

ok but which one is accurate? Thats a 5 - 15 Degree swing depending on which core youre looking at. Also... lets say Im working on a 47x multi... I havent touched Offset (this is correct?) and i cant load into windows until +.133 to Turbo? should I be getting this high? I have LLC set to 3, PLL Overvolt enabled
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*