Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*
New Posts  All Forums:Forum Nav:

Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition* - Page 645

Poll Results: Was this guide helpful?

Poll expired: Oct 17, 2012  
  • 80% (237)
    Yes (and I DO have an ASRock motherboard).
  • 15% (45)
    Yes (but I DO NOT have an ASRock motherboard).
  • 2% (7)
    No (and I DO have an ASRock motherboard).
  • 2% (7)
    No (but I DO NOT have an ASRock motherboard).
296 Total Votes  
post #6441 of 9531
Quote:
Originally Posted by Lucky 23 View Post

You have stability issues because you lowered LLC. If you lower LLC then you will most likely have to increase turbo.

What is your current Offset & Turbo? whats your idle vcore?

The ram shouldn't be the problem if it has passed memtest and is set to the correct speed & voltage in bios.

You might be messing with too many variables at once. I'm at 4.6 and i have not had to touch PLL. Just leave that on auto. If you bios is setup correctly you should only have to mess with offset and turbo.

That is what I figured with the Ram. I didn't just change a lot of variables at once. I have been trying different combinations one at a time. Lets just say I have tried a great deal of different combinations over the weekend.

I am aware that by decreasing LLC I am lowering the compensation for vdroop. I have appropriately been adjusting turbo and offset to compensate. The LLC isn't the issue but more so that I am having to push Vcore up over 1.26 volts and still not stable. I am seeing temps in the mid 90s already at this voltage so I can't really add anymore vcore. I have ruled out anything further I can do hardware related other that delidding or switching to a water cooler to get heat down. I think I just have a very hot running chip unfortunately. most likely staying at 4.4....

The weird thing is that I only fail prime at 256FFT and it isn't even every time I run it. I could pass it during a 20 minute run. Run IBT and pass. Then run prime with same settings and fail at 256 FFT. Add vcore, rinse repeat with same results! Same frickin fft on same core but not every time.......
Main Setup
(12 items)
 
  
CPUMotherboardGraphicsRAM
Ivy Bridge 3570k@4.5 Asrock Z77 Extreme 4 EVGA GTX 970 SSC 8 Gig - G.Skill 1600 ares 
CoolingOSMonitorKeyboard
Cooler Master Hyper 212 Evo Win 7 Samsung 120Hz Gigabyte Mechanical 
PowerCaseMouseAudio
Antec Neo Blue 650 Watt Cooler Master 690II Advanced 1600 dpi Bose Speakers 
  hide details  
Reply
Main Setup
(12 items)
 
  
CPUMotherboardGraphicsRAM
Ivy Bridge 3570k@4.5 Asrock Z77 Extreme 4 EVGA GTX 970 SSC 8 Gig - G.Skill 1600 ares 
CoolingOSMonitorKeyboard
Cooler Master Hyper 212 Evo Win 7 Samsung 120Hz Gigabyte Mechanical 
PowerCaseMouseAudio
Antec Neo Blue 650 Watt Cooler Master 690II Advanced 1600 dpi Bose Speakers 
  hide details  
Reply
post #6442 of 9531
Quote:
Originally Posted by Xtreme21 View Post

This guide has been extremely helpful! I'm thinking I pretty much found my wall at a Vcore I was comfortable with. Currently at 5.1Ghz: and I'm almost an hour into the "Final Test", vcore looks good temps are good! As for cooling I'm using a H100i.



Going for gold! thumb.gif

very nice chip you got there!
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
post #6443 of 9531
Quote:
Originally Posted by Klosiak View Post

Core i5 2500K, ASRock P67 Pro3, RAM 2x4GB Corsair Vengeance 1333MHz CL9, OC settings - none. I can't get stable system even on default CPU and RAM settings frown.gif

I assume you are connecting to the on-board video? So before RMA, make sure you have the most recent bios (reflash if you do, or flash to the new if you do not). Disconnect all peripheral devices except for your monitor, mouse and keyboard. Repost And please set EVERY setting to Auto then select the lowest XMP for your ram, then double check the ram settings to ensure they match the XMP spec. boot to windows. Open a command prompt (C:\) and type "sfc /scannow" and let it check for corrupted OS files (windows 7 only, this does not work for 8).

if this fails... rma the board.
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
post #6444 of 9531
Quote:
Originally Posted by Jpmboy View Post

Quote:
Originally Posted by Klosiak View Post

Core i5 2500K, ASRock P67 Pro3, RAM 2x4GB Corsair Vengeance 1333MHz CL9, OC settings - none. I can't get stable system even on default CPU and RAM settings frown.gif

I assume you are connecting to the on-board video? So before RMA, make sure you have the most recent bios (reflash if you do, or flash to the new if you do not). Disconnect all peripheral devices except for your monitor, mouse and keyboard. Repost And please set EVERY setting to Auto then select the lowest XMP for your ram, then double check the ram settings to ensure they match the XMP spec. boot to windows. Open a command prompt (C:\) and type "sfc /scannow" and let it check for corrupted OS files (windows 7 only, this does not work for 8).

if this fails... rma the board.

sfc/scannow does work in 8, as does the command to dump the results on the desktop that you shared with us before.
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
post #6445 of 9531
Hi,

I bought my mobo with 3.20 (newest) UEFI BIOS onboard. After testing with another PSU and failing tests I tried to flash 3.10 BIOS instead 3.20. After this I have some issues with restarts but I have used deafault settings on CPU and RAM, disabled deep sleep mode in S5 state and CPU power saving features (only C1E is on). Then I reinstalled Intel ME driver. I used newest from Intel website. Till now (2 days) there is no problem with random restarts. So maybe I have solved problem.

I read very interesting thread about UEFI 3.20 on ASRock P67 Pro3 ... they added Ivy Bridge support but some users od Sandy Bridge CPUs reported problems after moving from Sandy Bridge only BIOS version (2.00B). I don't know if it is connected with my problems but now my computer is working good. In this thread it was written that very often ASR support sends to affected users new BIOS chips flashed with older BIOS for replacement becouse after upgrade to 3.10/3.20 BIOS there is no chance to downgrade to older versions.
post #6446 of 9531
Quote:
Originally Posted by inedenimadam View Post

sfc/scannow does work in 8, as does the command to dump the results on the desktop that you shared with us before.

hey thanks! I didn't know it worked in 8.
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
post #6447 of 9531
What voltages do you guys usually need for 4.5GHz on 3570k?

I need like 1.232/1.240. Not sure if that's good or bad.
Project Chloe
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500k 4.4GHz 1.280v Fatal1ty Z68 Professional Gen3 MSI R6950 Twin Frozr III Corsair Vengence 8GB 1600MHz 
Hard DriveHard DriveOptical DriveOS
OCZ Vertex 4 Samsung Spinpoint F3 Asus 24X DVD Burner Windows 7 Ultimate 64bit 
MonitorMonitorKeyboardPower
ASUS VE228H ASUS VE228H Razor Blackwidow  Corsair 850HX 
CaseMouseMouse PadAudio
HAF X Logitech G500 Razer Goliathus Logitech G930 
  hide details  
Reply
Project Chloe
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500k 4.4GHz 1.280v Fatal1ty Z68 Professional Gen3 MSI R6950 Twin Frozr III Corsair Vengence 8GB 1600MHz 
Hard DriveHard DriveOptical DriveOS
OCZ Vertex 4 Samsung Spinpoint F3 Asus 24X DVD Burner Windows 7 Ultimate 64bit 
MonitorMonitorKeyboardPower
ASUS VE228H ASUS VE228H Razor Blackwidow  Corsair 850HX 
CaseMouseMouse PadAudio
HAF X Logitech G500 Razer Goliathus Logitech G930 
  hide details  
Reply
post #6448 of 9531
Quote:
Originally Posted by tryceo View Post

What voltages do you guys usually need for 4.5GHz on 3570k?

I need like 1.232/1.240. Not sure if that's good or bad.
Pretty much right at the average from everything I have seen. 4.5 at below 1.2v is good, and above 1.3v is not very good. 4.5 below 1.15v is very good, and 4.5 above 1.35v should be returned to the store imo.
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
post #6449 of 9531
Quote:
Originally Posted by Sh3perd View Post

so with the vanilla settings: 4.3 Vanilla Overclock (Click to show)




I BSOD'ed twice in a row with temps hitting 93, and 95. frown.gif i actually think this is a cooling problem with my Corsair h80i. Would the BIOS settings have caused this?

So with those settings, i re-did it with my new H100i, and here were the results:
4.3 Stable OC temps/pics (Click to show)

I ran it for about two hours without any problems (woohoo!!! thumbsupsmiley.png), and the max temp it spiked to at one point was 78 C. What do u guys think? Anything i should change in my settings? Because im not sure what to look for in regards to what to change to make it more stable.

Again, this is a I7 3570k Ivy bridge. My vcore stayed at about 1.2 max was 1.232 i think. is that good? lol im guessing lower is better...
Edited by Sh3perd - 5/30/13 at 11:15pm
post #6450 of 9531
That looks good. Some are going to tell you that you aren't stable until you've run Prime95 for 8+ hours but I'm not one of them (I don't use Prime95 at all) I suggest you just use your PC a lot over the next few days, doing what you normally do and if it doesn't crash then it's stable.You don't want to push the clock speed any higher tho unless you de-lid as your temps are nearing the max recommended.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*