Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*
New Posts  All Forums:Forum Nav:

Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition* - Page 660

Poll Results: Was this guide helpful?

Poll expired: Oct 17, 2012  
  • 80% (237)
    Yes (and I DO have an ASRock motherboard).
  • 15% (45)
    Yes (but I DO NOT have an ASRock motherboard).
  • 2% (7)
    No (and I DO have an ASRock motherboard).
  • 2% (7)
    No (but I DO NOT have an ASRock motherboard).
296 Total Votes  
post #6591 of 9534
Just giving an update on my overclocking.

I have 4.5ghz with temps(ambient temp around 25C) usually around 80 with spikes going to near 90. With offset at .005 and turbo at .020(tho I think it could be fine with .016 since I jumped that level.) The pll is also set at auto.


I think I can achieve 4.6 and maybe 4.7, but it seems to be taking a lot more volts to be stable(I have to change offset to .020 in order to be stable at idle, and more turbo for load.) Not to mention that memory is being affected at 4.6 so I will have to change something for that. But with the mass increase in volts and my temps already near the limit, I don't think I will be able to reach 5ghz without going underwater. But it was worth a shot.
post #6592 of 9534
Quote:
Originally Posted by Lucky 23 View Post

Yes you want your power settings on balanced otherwise the CPU will not downclock at idle. I dont know what type of cooling you have but you will probably hit your max temp before hitting 1.5v but yes keep increasing turbo.



allright, put it back on balanced.
So yeah, that's at 4,6 and when I go for 4,7 my temps go to 90, and after 30 minutes they're around 100.
I've got a corsair h100i with the stock paste, in a cooler master haf x, with 4 200 mm fans of which 2 are pushing in, 2 pulling out, and 2 140 mm fans pushing in. and of course the 2 h100i fans puling air through the radiator to the outside of the case.
I think my temp's are quite high, or are they normal for an h100i?
post #6593 of 9534
If your havent delided your CPU then you may not be able to clock it that high. Personally i wouldn't push it passed 90c
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
post #6594 of 9534
Quote:
Originally Posted by TwistedTime View Post

Just giving an update on my overclocking.

I have 4.5ghz with temps(ambient temp around 25C) usually around 80 with spikes going to near 90. With offset at .005 and turbo at .020(tho I think it could be fine with .016 since I jumped that level.) The pll is also set at auto.


I think I can achieve 4.6 and maybe 4.7, but it seems to be taking a lot more volts to be stable(I have to change offset to .020 in order to be stable at idle, and more turbo for load.) Not to mention that memory is being affected at 4.6 so I will have to change something for that. But with the mass increase in volts and my temps already near the limit, I don't think I will be able to reach 5ghz without going underwater. But it was worth a shot.


If your idle stable at a +0.005 offset with a 45 multi then you should not have to change your offset for 4.6, you will just need to increase turbo to get your full load stable.
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
post #6595 of 9534
Well I tried using turbo only, but it doesn't seem to matter. I am close to the temp wall while I am at 4.5(but still at a safe distant for daily use.), and it seems that 4.6 requires more volts(extra heat.) then I can safely do if I don't want to turn my comp into a bonfire.

Maybe during Winter I would be able to reach it.
post #6596 of 9534
Quote:
Originally Posted by Lucky 23 View Post

If your havent delided your CPU then you may not be able to clock it that high. Personally i wouldn't push it passed 90c

I haven't and I'm not, sticking with 4,6 ghz and good temps.

Thanks for your advise!
post #6597 of 9534
Thread Starter 
Just wanted to drop in before I drop in bed for sleep.
(Just got a job unloading freight from trucks. Hard work that makes me sleep a lot.)

Thanks for everyone who helps others with problems.
Your the reason OCN exists!

Also, thanks for those who stop in to ask questions!
Without you, there wouldn't be a need for answers and thus no OCN!

Keep of the good work guys! thumb.gif
post #6598 of 9534
Quote:
Originally Posted by Yanush View Post

The question is why Windows Memory Tool is founding errors (i dont know exactly what kind of errors, because after using the in-build windows tool computer restarts and after there is a message "Windows found problems with your memory")

Should i just ignore that...?
. No you can not ignore it. If the ram is bad, you need to remove or replace it ... If i understand the problem. Sry for mot responding sooner.
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
post #6599 of 9534
Nice to see this thread is still alive and well. I'm curious as to how SB vs IB vs. Haswell standup at same speeds. It sure looks like SB is the OC champ at decent temps, but from what limited data I've seen so far, it looks like Haswell performs better at any given speed. Anyone else seeing good reviews?

My system is still running cool and stable after over a year now.

marty
post #6600 of 9534
Ok, I have a 2600k and got up to 5.0 ghz stable but am having trouble breaking past that. The guide is a little confusing about what to do. According to the BSOD's, basically just keep throwin more vcore at it, which I assume would be the Turbo Voltage. If that's the case, then do we ever use the CPU Voltage offset? I'm real close to getting 51 multiplier but need a little help.

Here are my 5.0 stable settings:
50 multiplier
+137 turbo voltage
+.005 voltage offset
1.709 PLL voltage
Level 2
Approx 78C under Prime95 load

I've tried upping to Level 1 but I'm still getting BSOD 124 but my vcore is around 1.522 and I'm not sure if I can (or should) go any higher.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*