Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*
New Posts  All Forums:Forum Nav:

Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition* - Page 662

Poll Results: Was this guide helpful?

Poll expired: Oct 17, 2012  
  • 80% (237)
    Yes (and I DO have an ASRock motherboard).
  • 15% (45)
    Yes (but I DO NOT have an ASRock motherboard).
  • 2% (7)
    No (and I DO have an ASRock motherboard).
  • 2% (7)
    No (but I DO NOT have an ASRock motherboard).
296 Total Votes  
post #6611 of 9531
Quote:
Originally Posted by AeonLight View Post

Hello all! First time poster, long time forum reader. So I finally got some liquid cooling going on and decided to o/c my i5 3570k to 4.6ghz. I've been running P95 for over a hour now, my temps have peaked at 85c, but seem to mostly hang out in the mid 70's area. My only concern is that my vCore is at 1.320 (peaks out at 1.328) After reading through some of the threads it seems a little high to me, but this is my first o/c. I've kept bumping up the turbo voltage whenever I've received a BSOD, a worker stopping, and a program crashing. I'm having trouble figuring out the BSOD since I'm using Windows8 now. If during the 12hour test I need to bump up my vCore, should I just bump down .1 or .2 ghz or am I still in safe operating levels?

Hello,

What is your offset and turbo set at? Whats your CPU-z idle vcore when at a 16 multi?

Do you know what BSOD's your getting? If your stressing the CPU in P95 and a worker stops then usually your getting close to being fully stable. You will normally BSOD when starting off because your full load vcore is far off from being stable or your idle vcore is possibly unstable due to too low of offset.

Your full load vcore doesnt seem too high but might be able to be lowered. You can check this thread to compare your overclock to other members.
http://www.overclock.net/t/1247869/official-the-ivy-bridge-stable-suicide-club-guides-voltages-temps-bios-templates-inc-spreadsheet
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
post #6612 of 9531
Quote:
Originally Posted by AeonLight View Post

Hello all! First time poster, long time forum reader. So I finally got some liquid cooling going on and decided to o/c my i5 3570k to 4.6ghz. I've been running P95 for over a hour now, my temps have peaked at 85c, but seem to mostly hang out in the mid 70's area. My only concern is that my vCore is at 1.320 (peaks out at 1.328) After reading through some of the threads it seems a little high to me, but this is my first o/c. I've kept bumping up the turbo voltage whenever I've received a BSOD, a worker stopping, and a program crashing. I'm having trouble figuring out the BSOD since I'm using Windows8 now. If during the 12hour test I need to bump up my vCore, should I just bump down .1 or .2 ghz or am I still in safe operating levels?

That voltage isn't great as you said, but that's the silicon lottery for ya. I have a 3570k under water in a Z77E-ITX and it needs 1.312-1.32 for 4.5GHz and that's tested with 24hrs prime. Any lower and I start getting WHEA errors, workers stopping, or P95 itself crashing. I can't really say much for your temps as I'm delidded. But if I remember correctly, those temps are pretty much in line with where I was before I popped the top off my chip.

It sounds like you're doing everything right. I'm not exactly an expert, but if you have some wiggle room on your RAM voltage you may be able to lower it and lower your temps a tad. There may be a few other voltages to tweak to try and get temps down or stability better, but that's more than I could reliably help with. Good luck!
Spidey81
(19 items)
 
MINI-REAKTOR
(9 items)
 
 
CPUMotherboardGraphicsGraphics
i7 2700k Asus Sabertooth Z77 HD 6950 HD 6950 
RAMHard DriveOptical DriveCooling
G.SKILL Sniper  OCZ Vertex 3 Sony Optiarc DVD-RW XSPC Raystorm 
CoolingCoolingCoolingCooling
EK FC-6970 x2 XSPC D5 Dual Bay Reservoir (black vinyl version) XSPC RX360 XSPC RX240 
CoolingOSMonitorKeyboard
Custom PWM Fan Controller Windows 7 Home Premium 64bit Samsung SyncMaster 2433BW Microsoft Sidewinder X6 
PowerCaseMouse
OCZ ZX 850W NZXT Switch 810 (black) Microsoft Sidewinder 
CPUMotherboardGraphicsRAM
Intel i5-3570k Asrock Z77E-ITX Powercolor HD 7950 2 x 4GB Samsung low profile 1600Mhz 1.35V DDR3 
Hard DriveCoolingOSPower
256GB Sandisk Ultra Plus SSD Custom CPU/GPU water loop Windows 7/8 64 bit Silverston SFX 450 watt modular gold rated 
Case
Compact Splash by She Loved E and Dwood 
  hide details  
Reply
Spidey81
(19 items)
 
MINI-REAKTOR
(9 items)
 
 
CPUMotherboardGraphicsGraphics
i7 2700k Asus Sabertooth Z77 HD 6950 HD 6950 
RAMHard DriveOptical DriveCooling
G.SKILL Sniper  OCZ Vertex 3 Sony Optiarc DVD-RW XSPC Raystorm 
CoolingCoolingCoolingCooling
EK FC-6970 x2 XSPC D5 Dual Bay Reservoir (black vinyl version) XSPC RX360 XSPC RX240 
CoolingOSMonitorKeyboard
Custom PWM Fan Controller Windows 7 Home Premium 64bit Samsung SyncMaster 2433BW Microsoft Sidewinder X6 
PowerCaseMouse
OCZ ZX 850W NZXT Switch 810 (black) Microsoft Sidewinder 
CPUMotherboardGraphicsRAM
Intel i5-3570k Asrock Z77E-ITX Powercolor HD 7950 2 x 4GB Samsung low profile 1600Mhz 1.35V DDR3 
Hard DriveCoolingOSPower
256GB Sandisk Ultra Plus SSD Custom CPU/GPU water loop Windows 7/8 64 bit Silverston SFX 450 watt modular gold rated 
Case
Compact Splash by She Loved E and Dwood 
  hide details  
Reply
post #6613 of 9531
My offset voltages is +0.005 and my Additional turbo voltage is currently set at +0.109. When idling cpuZ reads 4600mhz all the time, but voltage is at 0.976. Real temp reports that load at 5% and a constant flux between 4200mhz-4600mhz. Intel Speed Step technology is on, I don't know why it won't idle at x16. Haven't overclocked the ram, factory is 1.6v so I just left it at that. The last bsod I received was KMode_Exception_Not_Handled, but that was a while ago.
post #6614 of 9531
Do you have your power option set to high performance? If so then that is why it is not sitting around x16 when idle.

Your memory volts sound a little high, but if that is what the manufacture says it should be then I guess it is fine... tho you could try testing to see if it works at lower volts, but I don't think it will help with your cpu volt usage much.
post #6615 of 9531
Thank you all for the help! Adjusting the power settings did the trick. The mobo originally recognizes the ram at 1.5v, but it caused alot of stability problems til I figured out that I need to up it to the factory setting of 1.65v.
post #6616 of 9531
got interested in using offset (always using manual) and followed this guide although my previous settings was only around 4.2ghz @ 1.250 volts, i tried getting it higher. I was wondering if i can improve something with the settings.

im using a 2500k and Z77e-ITX and i got 4.5ghz with Offset to +0.005v and Turbo Boost to +0.004v and also following the settings on the first page. LLC i think is at level.

my temps during P95 using blend test for about an hour and it is going around 78C max. never got any fatal error and BSODs though, and the case is warmer than usual which i think its normal. ambient temp is around 28C since I tried it nighttime.

i was also wondering if the settings would change if i am using a GPU, i tried it yesterday without GPU since my replacement GPU has yet to come.

will post pic later so that i can confirm what i said above, i think i could be wrong somewhere.
Karma
(14 items)
 
Backup Rig
(12 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 4770k Asrock Z87M OC Formula GTX Titan X Crucial Ballistix Tactical LP 4GB x4 
Hard DriveHard DriveCoolingCooling
Toshiba Q 256GB HGST 7k1000 1TB Be Quiet! Dark Rock Pro 3 Be Quiet! Silent Wings 2 
OSMonitorKeyboardPower
Windows 7 Ultimate Dell U3014 HHKB Pro JP Seasonic X760 
CaseMouse
Phanteks Enthoo EVOLV Logitech G302 
CPUMotherboardGraphicsRAM
Pentium G3258 Asus H81M-E MSI GTX 750ti Gaming Samsung MV-3V4G3D/US 4GB x 2 
Hard DriveCoolingOSMonitor
Patriot Torqx 2 Cryorig C1 Windows 7 Ultimate Samsung T220 
KeyboardPowerCaseMouse
IBM Model M 139401 Seasonic X560 Fractal Core 1000 Microsoft Intellimouse 1.1 
  hide details  
Reply
Karma
(14 items)
 
Backup Rig
(12 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 4770k Asrock Z87M OC Formula GTX Titan X Crucial Ballistix Tactical LP 4GB x4 
Hard DriveHard DriveCoolingCooling
Toshiba Q 256GB HGST 7k1000 1TB Be Quiet! Dark Rock Pro 3 Be Quiet! Silent Wings 2 
OSMonitorKeyboardPower
Windows 7 Ultimate Dell U3014 HHKB Pro JP Seasonic X760 
CaseMouse
Phanteks Enthoo EVOLV Logitech G302 
CPUMotherboardGraphicsRAM
Pentium G3258 Asus H81M-E MSI GTX 750ti Gaming Samsung MV-3V4G3D/US 4GB x 2 
Hard DriveCoolingOSMonitor
Patriot Torqx 2 Cryorig C1 Windows 7 Ultimate Samsung T220 
KeyboardPowerCaseMouse
IBM Model M 139401 Seasonic X560 Fractal Core 1000 Microsoft Intellimouse 1.1 
  hide details  
Reply
post #6617 of 9531
Back to my original question, when the turbo boost voltage is maxxed, do we use the voltage offset to reduce it to normal levels to stay within acceptable limits?
Quote:
Originally Posted by Dyaems View Post

got interested in using offset (always using manual) and followed this guide although my previous settings was only around 4.2ghz @ 1.250 volts, i tried getting it higher. I was wondering if i can improve something with the settings.

im using a 2500k and Z77e-ITX and i got 4.5ghz with Offset to +0.005v and Turbo Boost to +0.004v and also following the settings on the first page. LLC i think is at level.

my temps during P95 using blend test for about an hour and it is going around 78C max. never got any fatal error and BSODs though, and the case is warmer than usual which i think its normal. ambient temp is around 28C since I tried it nighttime.

i was also wondering if the settings would change if i am using a GPU, i tried it yesterday without GPU since my replacement GPU has yet to come.

will post pic later so that i can confirm what i said above, i think i could be wrong somewhere.
If you're trying to remove the GPU to lower your temps, that will help but you could always just remove the side panel and put a household fan aimed at the mobo. Other than that, a better heatsink or watercooling would be in order to dissipate the heat away from the CPU.
post #6618 of 9531
Quote:
Originally Posted by Lord Odin View Post

Back to my original question, when the turbo boost voltage is maxxed, do we use the voltage offset to reduce it to normal levels to stay within acceptable limits?
If you're trying to remove the GPU to lower your temps, that will help but you could always just remove the side panel and put a household fan aimed at the mobo. Other than that, a better heatsink or watercooling would be in order to dissipate the heat away from the CPU.

ah nope, its just that i dont have the GPU at the moment. ill put it back once i got the replacement prolly few weeks from now.

update: last night it doesnt have any problems, but when i booted it just now, im getting hangs and bsods telling me to increase vCore. i read in another thread that playing around with LLC might fix this, and it didnt. so I reverted to my old settings, ill play around with it again before sleep!

heres the pics:



Karma
(14 items)
 
Backup Rig
(12 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 4770k Asrock Z87M OC Formula GTX Titan X Crucial Ballistix Tactical LP 4GB x4 
Hard DriveHard DriveCoolingCooling
Toshiba Q 256GB HGST 7k1000 1TB Be Quiet! Dark Rock Pro 3 Be Quiet! Silent Wings 2 
OSMonitorKeyboardPower
Windows 7 Ultimate Dell U3014 HHKB Pro JP Seasonic X760 
CaseMouse
Phanteks Enthoo EVOLV Logitech G302 
CPUMotherboardGraphicsRAM
Pentium G3258 Asus H81M-E MSI GTX 750ti Gaming Samsung MV-3V4G3D/US 4GB x 2 
Hard DriveCoolingOSMonitor
Patriot Torqx 2 Cryorig C1 Windows 7 Ultimate Samsung T220 
KeyboardPowerCaseMouse
IBM Model M 139401 Seasonic X560 Fractal Core 1000 Microsoft Intellimouse 1.1 
  hide details  
Reply
Karma
(14 items)
 
Backup Rig
(12 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 4770k Asrock Z87M OC Formula GTX Titan X Crucial Ballistix Tactical LP 4GB x4 
Hard DriveHard DriveCoolingCooling
Toshiba Q 256GB HGST 7k1000 1TB Be Quiet! Dark Rock Pro 3 Be Quiet! Silent Wings 2 
OSMonitorKeyboardPower
Windows 7 Ultimate Dell U3014 HHKB Pro JP Seasonic X760 
CaseMouse
Phanteks Enthoo EVOLV Logitech G302 
CPUMotherboardGraphicsRAM
Pentium G3258 Asus H81M-E MSI GTX 750ti Gaming Samsung MV-3V4G3D/US 4GB x 2 
Hard DriveCoolingOSMonitor
Patriot Torqx 2 Cryorig C1 Windows 7 Ultimate Samsung T220 
KeyboardPowerCaseMouse
IBM Model M 139401 Seasonic X560 Fractal Core 1000 Microsoft Intellimouse 1.1 
  hide details  
Reply
post #6619 of 9531
Quote:
Originally Posted by Dyaems View Post

ah nope, its just that i dont have the GPU at the moment. ill put it back once i got the replacement prolly few weeks from now.

update: last night it doesnt have any problems, but when i booted it just now, im getting hangs and bsods telling me to increase vCore. i read in another thread that playing around with LLC might fix this, and it didnt. so I reverted to my old settings, ill play around with it again before sleep!

heres the pics:



A cold boot problem like you describe, especially at 45 pr so is not Likely llc. First try enablipng Internal PLL, orbetter. Add 5mV to offset, not turbo. Download a copy of openhardware monitor amdset it to start with windows. You'll note the vcore spike windows willpull (although it is a low current voltage spike- nothing to worry about).

Depending on your mobo, LLC can really affect the amplitude of this vcore overshoot. So first add 5mV, or enable iPLL... Then try LLC

What did you have LLC set at?

Please fill out rigbuilder and add your rig to your signature block... Helps to see all your kit, cooler, ps, etc.

Plz xcuse the itypos smile.gif
Edited by Jpmboy - 6/21/13 at 5:38am
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
x99
(26 items)
 
z170/z270
(27 items)
 
x299
(10 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme (STD and model-10) 2 GTX TitanXp 
GraphicsRAMHard DriveHard Drive
2 GTX Titan X Pascal GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) 
Hard DriveOptical DriveCoolingCooling
Samsung NVMe 950 Pro M.2 Plextor 810 Aquacomputer GiGant 1680 (4x420) external Rad XSPC RX360 
CoolingCoolingCoolingOS
Koolance 380i Laing DDC-1T (2) Koolance EXC-800 Chiller Windows 10 x64  
OSOSMonitorMonitor
Windows 7 Pro Linux Mint ASUS Swift 1440P 144Hz Seiki 50" 4K monitor (720P-2160i) 240-30Hz 
KeyboardPowerCaseMouse
Das Keyboard Model S Pro Corsair AX1500i MicroCool Banchetto 101 Steelseries Rival 
AudioOther
Ultimate Ears TF10 Koolance Pump/Fan Controller 
CPUCPUCPUMotherboard
i5 6600K i7 7700K i3 7350 ASUS Max iX APEX, Asrock MOCF, M8Impact 
GraphicsGraphicsGraphicsRAM
ASUS GTX 1080 Turbo ASUS GTX 960 Mini EVGA GTX 550Ti G.Skill 3600c15 
RAMHard DriveHard DriveHard Drive
G.Skill 4266c19 Samsung SM951 WD VR 300 Intel 750 NVMe U.2 
Hard DriveHard DriveOptical DriveCooling
Mushkin 512 Intel 600 NVMe Raid0 Plextor DVD ROM Custom Water (Koolance 380i / XSPC 360v2) 
CoolingOSOSOS
Corsair H80iV2 (M8I) Windows 10 Pro Window 7 Linux Mint 
MonitorMonitorKeyboardPower
Seiki 4K AOC 1080P Ducky Cherry Black Silverstone 500W SFX form factor/ Seasonic 760W 
CaseMouseAudio
Bench Logitech G700s Ultimate Ears TF10s 
CPUMotherboardGraphicsRAM
7740X ASUS Rampage Apex Various G.Skill 3600c15 2x8GB kits 
Hard DriveCoolingOSKeyboard
Samsung 960 Pro, NVMe Custom Water Windows 10 Razor Black Widow 
PowerCase
Seasonic 1000 Platinum, Corsair 1500i none :-) 
  hide details  
Reply
post #6620 of 9531
Quote:
Originally Posted by Lord Odin View Post

Back to my original question, when the turbo boost voltage is maxxed, do we use the voltage offset to reduce it to normal levels to stay within acceptable limits?

You can but it all depends on your idle vcore X offset. You might not be able to decrease your offset because you idle might become unstable. So a better option would just be to decrease turbo. I would need more information about what your trying to accomplish to help you further. Not sure what multi you are going for but normally you will not be maxing out your turbo voltage.

EDIT:
Quote:
Originally Posted by Lord Odin View Post

Ok, I have a 2600k and got up to 5.0 ghz stable but am having trouble breaking past that. The guide is a little confusing about what to do. According to the BSOD's, basically just keep throwin more vcore at it, which I assume would be the Turbo Voltage. If that's the case, then do we ever use the CPU Voltage offset? I'm real close to getting 51 multiplier but need a little help.

Here are my 5.0 stable settings:
50 multiplier
+137 turbo voltage
+.005 voltage offset
1.709 PLL voltage
Level 2
Approx 78C under Prime95 load

I've tried upping to Level 1 but I'm still getting BSOD 124 but my vcore is around 1.522 and I'm not sure if I can (or should) go any higher.

In this case, if your turbo is maxed then you will increase offset to get a higher full load vcore. You idle voltage in CPU-z will increase also.
Edited by Lucky 23 - 6/21/13 at 6:53am
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*