Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*
New Posts  All Forums:Forum Nav:

Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition* - Page 723

Poll Results: Was this guide helpful?

Poll expired: Oct 17, 2012  
  • 80% (237)
    Yes (and I DO have an ASRock motherboard).
  • 15% (45)
    Yes (but I DO NOT have an ASRock motherboard).
  • 2% (7)
    No (and I DO have an ASRock motherboard).
  • 2% (7)
    No (but I DO NOT have an ASRock motherboard).
296 Total Votes  
post #7221 of 9531
Quote:
Originally Posted by nubo View Post

Quote:
Originally Posted by inedenimadam View Post

allowing your processor to run at 5% will allow it to downclock which will reduce vcore in the lower processor states (idle), but that does not mean that you will be able to lower your overall voltage settings in the BIOS, the two things might seem related, but are independent variables in the answer to your question.

what i meant to say was, if i lower to 5% this will allow me to have a lower idle vcore which in return will also allow me to lower the full vcore without having problems? because in order to have a lower full vcore i have to decrease the offset which also lowers the idle vcore. what is a recommended idle vcore? i thought that 0.928 was pretty low and i shouldn't go past it.

Every processor is different, what is stable at idle for you might be higher/lower, so I cant give you an exact number that will be the lowest for your chip. If you want your processor to "idle" change the minimum to 5%, it wont change your VCore requirements.

You should try to reduce VCore both at idle and at full load to as low as possible without loosing stability. Here is my idle/load:



Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
post #7222 of 9531
Quote:
Originally Posted by nubo View Post

set power management to balanced.

set offset -0.075 and got a 1.296 vcore under load and ran prime95 for no more than 2 minutes and got a bsod. im now at -0.070 with a 1.304 vcore running prime95 and will let it run for 4-5 hours.

bsod after a few minutes.

offset now set to -0.065. vcore @ 1.312. running prime95.

edit: decided to go with the settings i had in my 1st post seeing as how i ran prime95 for over an hour with no problems.
Edited by nubo - 10/16/13 at 10:12am
post #7223 of 9531
Quote:
Originally Posted by nubo View Post

Quote:
Originally Posted by nubo View Post

set power management to balanced.

set offset -0.075 and got a 1.296 vcore under load and ran prime95 for no more than 2 minutes and got a bsod. im now at -0.070 with a 1.304 vcore running prime95 and will let it run for 4-5 hours.

bsod after a few minutes.

offset now set to -0.065. vcore @ 1.312. running prime95.

edit: decided to go with the settings i had in my 1st post seeing as how i ran prime95 for over an hour with no problems.

Sounds like you have your sweet spot then. No two chips are identical, and I have seen a wide selection come through this thread, yours seems to be on the higher voltage side, but you are still are below the max daily suggested voltage threshold, with a moderate overclock, and your BIOS looks good, so I would consider it a win! thumb.gif
one last comment: As Lucky suggested on the last page, one hour might not be a long enough stress test depending on your stability requirements. If you are just gaming, interwebz browsing, and not much else, then a 1 hour test is fine. But if you use your computer for business/education (writing papers) or store information on your computer that is not backed up somewhere else, a 24-hour run is the norm.
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
post #7224 of 9531
I recently got a 2500k from a friend to upgrade from my 2500, and aftre reading the guide and looking around in the BIOS my CPU Core Offset Voltage can only move in 50mV increments. What does that mean for me, where should I begin? I'm not looking for a huge overclock, just something small and stable.

I'm using the Asrock Z68 Pro3 Gen3 with the most recent BIOS revision. Any ideas where I should begin with this?
post #7225 of 9531
Quote:
Originally Posted by revolution2718 View Post

I recently got a 2500k from a friend to upgrade from my 2500, and aftre reading the guide and looking around in the BIOS my CPU Core Offset Voltage can only move in 50mV increments. What does that mean for me, where should I begin? I'm not looking for a huge overclock, just something small and stable.

I'm using the Asrock Z68 Pro3 Gen3 with the most recent BIOS revision. Any ideas where I should begin with this?

What are you doing for a heat spreader?
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
post #7226 of 9531
Quote:
Originally Posted by inedenimadam View Post

What are you doing for a heat spreader?

I have a 212 EVO
post #7227 of 9531
Quote:
Originally Posted by revolution2718 View Post

Quote:
Originally Posted by inedenimadam View Post

What are you doing for a heat spreader?

I have a 212 EVO
do you have the "additional turbo voltage option?
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
post #7228 of 9531
Quote:
Originally Posted by inedenimadam View Post

do you have the "additional turbo voltage option?

Yes in increments of .004
post #7229 of 9531
Quote:
Originally Posted by revolution2718 View Post

Quote:
Originally Posted by inedenimadam View Post

do you have the "additional turbo voltage option?

Yes in increments of .004

Then you can do this! start with -.050 (cant get any closer to 0 ) offset and +.004 additional turbo, and set multiplier to 45 and see if it is stable! Hopefully your voltage will be below 1.35 and your temps below 80.

Edit to add: obviously set the rest of your bios like the pictures on the first page of this thread
Edited by inedenimadam - 10/16/13 at 2:11pm
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
post #7230 of 9531
Quote:
Originally Posted by inedenimadam View Post

Then you can do this! start with -.050 (cant get any closer to 0 ) offset and +.004 additional turbo, and set multiplier to 45 and see if it is stable! Hopefully your voltage will be below 1.35 and your temps below 80.

Edit to add: obviously set the rest of your bios like the pictures on the first page of this thread

What exactly does the negative offset 50 do? And if its not stable do i just need to add more turbo voltage? Or lower the multiplier?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*