Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*
New Posts  All Forums:Forum Nav:

Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition* - Page 789

Poll Results: Was this guide helpful?

Poll expired: Oct 17, 2012  
  • 80% (237)
    Yes (and I DO have an ASRock motherboard).
  • 15% (45)
    Yes (but I DO NOT have an ASRock motherboard).
  • 2% (7)
    No (and I DO have an ASRock motherboard).
  • 2% (7)
    No (but I DO NOT have an ASRock motherboard).
296 Total Votes  
post #7881 of 9531
Quote:
Originally Posted by inedenimadam View Post

That is vdroop, and you can change load line calibration to defeat it. Unfortunately I do not have a giga board, and this is the ASRock overclocking guide, so I cant tell you exactly how your motherboard handles it, but I am pretty sure you can convince it to compensate for the vdroop in BIOS.

Thanks for the quick reply.

So would an ideal situation be to have an idle of around 1.26v and then have vDroop compensate when load is applied, so it stays at 1.26v?
Then from there I assume I need to find out how to lower my idle vcore so it's only using what it needs and applies the extra voltage under load?
post #7882 of 9531
Quote:
Originally Posted by Koozer View Post

Quote:
Originally Posted by inedenimadam View Post

That is vdroop, and you can change load line calibration to defeat it. Unfortunately I do not have a giga board, and this is the ASRock overclocking guide, so I cant tell you exactly how your motherboard handles it, but I am pretty sure you can convince it to compensate for the vdroop in BIOS.

Thanks for the quick reply.

So would an ideal situation be to have an idle of around 1.26v and then have vDroop compensate when load is applied, so it stays at 1.26v?
Then from there I assume I need to find out how to lower my idle vcore so it's only using what it needs and applies the extra voltage under load?

That is the general idea. With a high load line compensation, your chip wont back off the voltage during load. To get your giga board to idle at 1.000 and 16x, find the gigabyte based club/guide and ask in there. Again, this is the ASRock based guide, so things are labeled slightly different in the BIOS between our boards.
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
post #7883 of 9531
Quote:
Originally Posted by inedenimadam View Post

That is the general idea. With a high load line compensation, your chip wont back off the voltage during load. To get your giga board to idle at 1.000 and 16x, find the gigabyte based club/guide and ask in there. Again, this is the ASRock based guide, so things are labeled slightly different in the BIOS between our boards.

Thanks again,

Yep I know where the 16x idle option is. I've turned this off myself. This is the best guide I've found so have translated all the advise over to adjustments in my BIOS. I'll have a further look when I get home and see what I can do about this vDroop. smile.gif
post #7884 of 9531
UGGGGGGGHHHHHH...

I took my battery out because I got a drip on it when I was draining my loop...Now I cant find the paper I had my settings for 5.0 written down on and I am stuck in WHEA-ville all over again mad.gif
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
post #7885 of 9531
I currently have my z68 board set to load line level 2. Is this this the typical setting for a 3770k at 4.7-4.8Ghz?

One more thing, for an OC of 4.7Ghz, I have set my offset to LLC= 2 and + 0.095.Turbo voltage is set to auto I believe. Everything seems fine and stable. I have passed a 24 hour run of Prime95 with 90 percent of my RAM and no WHEA errors for the last 3 days. My question is, should I lower my offset voltage and raise the turbo voltage?

Update: i went ahead and changed my offset to LLC =2 and +.0.05 with turbo voltage set to +0.086. With these settings I'm getting 1.288-1.296v which is what I was getting when I used a +0.095 offset and no turbo voltage. Would these settings be better? Would using a low offset combined with additional turbo voltage allow me to possibly slightly lower the voltage amount required at full load compared to only using offset and no turbo voltage?
Edited by DADDYDC650 - 3/14/14 at 4:20am
Gaming PC
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD RYZEN R7 1800X @4.1Ghz GA-AX370-Gaming K7 EVGA GTX 1080 Ti SC Black Edition G.SKILL TridentZ RGB Series 16GB (2 x 8GB) 3200... 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Pro 256GB SSD Samsung 850 Pro 512GB SSD Samsung 850 EVO 1TB SSD Corsair H100i 
OSMonitorKeyboardPower
Microsoft Windows 10 Pro 64-bit Samsung 49KS8000 Corsair K70 RGB Corsair AX1200i 
CaseMouseMouse PadAudio
Cooler Master Mastercase Maker 5  Corsair M65 RGB Custom SF 49ERS mouse pad Philips X1 headphones with V-MODA BoomPro mic 
Audio
Sound BlasterX Katana 
  hide details  
Reply
Gaming PC
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD RYZEN R7 1800X @4.1Ghz GA-AX370-Gaming K7 EVGA GTX 1080 Ti SC Black Edition G.SKILL TridentZ RGB Series 16GB (2 x 8GB) 3200... 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Pro 256GB SSD Samsung 850 Pro 512GB SSD Samsung 850 EVO 1TB SSD Corsair H100i 
OSMonitorKeyboardPower
Microsoft Windows 10 Pro 64-bit Samsung 49KS8000 Corsair K70 RGB Corsair AX1200i 
CaseMouseMouse PadAudio
Cooler Master Mastercase Maker 5  Corsair M65 RGB Custom SF 49ERS mouse pad Philips X1 headphones with V-MODA BoomPro mic 
Audio
Sound BlasterX Katana 
  hide details  
Reply
post #7886 of 9531
Yes its always better to have a lower offset and a higher turbo. Having a lower offset means that you will also have a lower or close to stock idle vcore.

LLC is different then offset. Most people in this tread are using LLC Level 2 or 3.

Using offset only or offset + turbo is not going to change the amount of voltage needed to stabilize your full load. Offset + Turbo is just a better way to setup your OC because you can fine tune the voltages better then using offset only.
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
post #7887 of 9531
Quote:
Originally Posted by Lucky 23 View Post

Yes its always better to have a lower offset and a higher turbo. Having a lower offset means that you will also have a lower or close to stock idle vcore.

LLC is different then offset. Most people in this tread are using LLC Level 2 or 3.

Using offset only or offset + turbo is not going to change the amount of voltage needed to stabilize your full load. Offset + Turbo is just a better way to setup your OC because you can fine tune the voltages better then using offset only.
Should I leave my offset at +0.005 with the turbo at +0.086? This gives me the exact voltage I need at full load to run 4.7Ghz stable.
Gaming PC
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD RYZEN R7 1800X @4.1Ghz GA-AX370-Gaming K7 EVGA GTX 1080 Ti SC Black Edition G.SKILL TridentZ RGB Series 16GB (2 x 8GB) 3200... 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Pro 256GB SSD Samsung 850 Pro 512GB SSD Samsung 850 EVO 1TB SSD Corsair H100i 
OSMonitorKeyboardPower
Microsoft Windows 10 Pro 64-bit Samsung 49KS8000 Corsair K70 RGB Corsair AX1200i 
CaseMouseMouse PadAudio
Cooler Master Mastercase Maker 5  Corsair M65 RGB Custom SF 49ERS mouse pad Philips X1 headphones with V-MODA BoomPro mic 
Audio
Sound BlasterX Katana 
  hide details  
Reply
Gaming PC
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD RYZEN R7 1800X @4.1Ghz GA-AX370-Gaming K7 EVGA GTX 1080 Ti SC Black Edition G.SKILL TridentZ RGB Series 16GB (2 x 8GB) 3200... 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Pro 256GB SSD Samsung 850 Pro 512GB SSD Samsung 850 EVO 1TB SSD Corsair H100i 
OSMonitorKeyboardPower
Microsoft Windows 10 Pro 64-bit Samsung 49KS8000 Corsair K70 RGB Corsair AX1200i 
CaseMouseMouse PadAudio
Cooler Master Mastercase Maker 5  Corsair M65 RGB Custom SF 49ERS mouse pad Philips X1 headphones with V-MODA BoomPro mic 
Audio
Sound BlasterX Katana 
  hide details  
Reply
post #7888 of 9531
Quote:
Originally Posted by inedenimadam View Post

UGGGGGGGHHHHHH...

I took my battery out because I got a drip on it when I was draining my loop...Now I cant find the paper I had my settings for 5.0 written down on and I am stuck in WHEA-ville all over again mad.gif

And we are back! biggrin.gif
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
post #7889 of 9531
Quote:
Originally Posted by DADDYDC650 View Post

Should I leave my offset at +0.005 with the turbo at +0.086? This gives me the exact voltage I need at full load to run 4.7Ghz stable.

What is your idle vcore in CPU-z?
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
Z170 Build
(20 items)
 
Z68 Build
(20 items)
 
Lenovo T430
(14 items)
 
CPUMotherboardGraphicsGraphics
I7 6700K @ 4.5ghz  Gigabyte Z170x Gaming 6 XFX R9 290x 8GB XFX R9 290x 8GB 
RAMHard DriveHard DriveCooling
Gskill RipJaws V 16GB 3000mhz Samsung 850 EVO 250GB Seagate Barracuda 2TB EK-Supremacy EVO CPU Water Block 
CoolingCoolingCoolingCooling
EK R9 290X GPU Waterblocks EK-XRES 140 Revo D5 PWM Pump Alphacool NexXxoS 360mm ST30 Alphacool NexXxoS 240mm ST30 
CoolingCoolingOSMonitor
Alphacool NexXxoS 120mm ST30 Cooler Master Jetflo 120mm Fans Windows 10  LG 34UC88 
KeyboardPowerCaseMouse
Quickfire TK red switch Cooler Master V1000 MasterCase Pro 5 CM Storm Havoc 
CPUMotherboardGraphicsGraphics
I5 2500K @ 4.6ghz  ASRock Z68 Extreme 3 Gen 3 ASUS 7870 Ghz Edition ASUS 7870 Ghz Edition 
RAMHard DriveHard DriveOptical Drive
Gskill RipJaws X 16GB 1600mhz Seagate 2TB Seagate 320GB ASUS Burner 
CoolingCoolingCoolingOS
Cooler Master Eisberg 240L + 120mm Rad Koolance 3/8 x 1/2 Compression Fittings PrimoChill Advanced LRT Windows 7  
OSMonitorKeyboardPower
Ubuntu 12.04 ASUS 24" Cooler Master Quickfire TK  Cooler Master V1000 
CaseMouse
Cooler Master HAF 932 Black Edition Cooler Master Havoc 
CPUGraphicsRAMHard Drive
i5-3210M  Intel HD Graphics 4000 Gskill 16GB 1600mhz  Crucial MX200 256GB 
Hard DriveOSOSMonitor
Seagate 320GB Ubuntu 16.04 Windows 10 1600x900 
  hide details  
Reply
post #7890 of 9531
Quote:
Originally Posted by Lucky 23 View Post

What is your idle vcore in CPU-z?
It fluctuates between 0.936v and 0.944v. Mostly at 0.944v though.
Edited by DADDYDC650 - 3/14/14 at 6:09pm
Gaming PC
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD RYZEN R7 1800X @4.1Ghz GA-AX370-Gaming K7 EVGA GTX 1080 Ti SC Black Edition G.SKILL TridentZ RGB Series 16GB (2 x 8GB) 3200... 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Pro 256GB SSD Samsung 850 Pro 512GB SSD Samsung 850 EVO 1TB SSD Corsair H100i 
OSMonitorKeyboardPower
Microsoft Windows 10 Pro 64-bit Samsung 49KS8000 Corsair K70 RGB Corsair AX1200i 
CaseMouseMouse PadAudio
Cooler Master Mastercase Maker 5  Corsair M65 RGB Custom SF 49ERS mouse pad Philips X1 headphones with V-MODA BoomPro mic 
Audio
Sound BlasterX Katana 
  hide details  
Reply
Gaming PC
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD RYZEN R7 1800X @4.1Ghz GA-AX370-Gaming K7 EVGA GTX 1080 Ti SC Black Edition G.SKILL TridentZ RGB Series 16GB (2 x 8GB) 3200... 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Pro 256GB SSD Samsung 850 Pro 512GB SSD Samsung 850 EVO 1TB SSD Corsair H100i 
OSMonitorKeyboardPower
Microsoft Windows 10 Pro 64-bit Samsung 49KS8000 Corsair K70 RGB Corsair AX1200i 
CaseMouseMouse PadAudio
Cooler Master Mastercase Maker 5  Corsair M65 RGB Custom SF 49ERS mouse pad Philips X1 headphones with V-MODA BoomPro mic 
Audio
Sound BlasterX Katana 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*