Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*
New Posts  All Forums:Forum Nav:

Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition* - Page 861

Poll Results: Was this guide helpful?

Poll expired: Oct 17, 2012  
  • 80% (237)
    Yes (and I DO have an ASRock motherboard).
  • 15% (45)
    Yes (but I DO NOT have an ASRock motherboard).
  • 2% (7)
    No (and I DO have an ASRock motherboard).
  • 2% (7)
    No (but I DO NOT have an ASRock motherboard).
296 Total Votes  
post #8601 of 8609
Quote:
Originally Posted by HowYesNo View Post

Quote:
Originally Posted by inedenimadam View Post

you can leave those on auto for 45x. vccsa may help a super high memory overclock, pll may lower temps 1-2c. stick with cpu offset and turbo voltages until you are going for extreme clocks.

tx, i don't need more than this. i'll run prime for longer time on weekend to see if stable for 6-8 hours. temps are fine now as it's winter and my room temp is bellow 20C, in the summer it gets over 30C.
what do i set pll?
1 thing that bugs me is incorrect memory voltage readings. what ever i st it to it reads 1.832, if i enable power saving it goes down to 1.732. must be bios issue. is there a software that read mem voltage?

WHOA! 1.8 memory?! is this with XMP profile? 1.7 is that hard cliff for me, no matter the bench. Are you sure you are not looking at your PLL? Because that sounds more like PLL voltages. 1.5 is for most kits, 1.65 for the extreme memory kits.

PLL is not necessary to mess with, but I run mine 1.725, which is pretty low, but also did not affect stability, and brought me down a bit in loaded temps (1-2C maybe)
Blue540
(14 items)
 
4K for 4K
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
5820k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
ADATA DDR4 2400 CL16 4x4 Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
LG 49" 4K Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
4K for 4K
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
5820k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
ADATA DDR4 2400 CL16 4x4 Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
LG 49" 4K Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
post #8602 of 8609
Quote:
Originally Posted by HowYesNo View Post

tx, i don't need more than this. i'll run prime for longer time on weekend to see if stable for 6-8 hours. temps are fine now as it's winter and my room temp is bellow 20C, in the summer it gets over 30C.
what do i set pll?
1 thing that bugs me is incorrect memory voltage readings. what ever i st it to it reads 1.832, if i enable power saving it goes down to 1.732. must be bios issue. is there a software that read mem voltage?

I am an old-time overclocker, lol, just a few GHz is OK for me these days, 3770k at 4.0 - 4.2, ok for me with a GTX 970 Gaming, seems to eat everything ok, maybe SLi later, lol, beyond redemption!

BUT with Prime95, long experience tells me always minimum 12 hours, and 24 is best. Can avoid hassles and unexpected crap later.

Good luck.
post #8603 of 8609
Quote:
Originally Posted by inedenimadam View Post

WHOA! 1.8 memory?! is this with XMP profile? 1.7 is that hard cliff for me, no matter the bench. Are you sure you are not looking at your PLL? Because that sounds more like PLL voltages. 1.5 is for most kits, 1.65 for the extreme memory kits.

PLL is not necessary to mess with, but I run mine 1.725, which is pretty low, but also did not affect stability, and brought me down a bit in loaded temps (1-2C maybe)
you are right, thisi is cpu PLL. i got 2 readings of the same thing.
post #8604 of 8609
it seems this setup is not stable. i started prime adn went out after i came back i see prime not running, system rebooted. it ran prime for about 3 hours. there is error in event viewer after system booted, it says:
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000124 (0x0000000000000000, 0xffffe001ee0f6028, 0x00000000be200000, 0x000000000005110a). A dump was saved in: C:\Windows\Minidump\022715-7781-01.dmp. Report Id: 022715-7781-01.

do i need more voltage. i set CPU PLL manually to 1.808. was on auto last time i run prime?


post #8605 of 8609
Quote:
Originally Posted by HowYesNo View Post

The bugcheck was: 0x00000124

more vcore needed
Blue540
(14 items)
 
4K for 4K
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
5820k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
ADATA DDR4 2400 CL16 4x4 Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
LG 49" 4K Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
4K for 4K
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
5820k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
ADATA DDR4 2400 CL16 4x4 Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
LG 49" 4K Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
post #8606 of 8609
i think i got ti now. i set turbo voltage to +0.035. run prime for 12.5 hour, no error o whea error, stable max temp 70C Vcore max at 1.224
post #8607 of 8609
Quote:
Originally Posted by HowYesNo View Post

i think i got ti now. i set turbo voltage to +0.035. run prime for 12.5 hour, no error o whea error, stable max temp 70C Vcore max at 1.224

Not a bad chip, and looks like its stable.

Good job thumb.gif
Blue540
(14 items)
 
4K for 4K
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
5820k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
ADATA DDR4 2400 CL16 4x4 Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
LG 49" 4K Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
4K for 4K
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
5820k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
ADATA DDR4 2400 CL16 4x4 Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
LG 49" 4K Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
post #8608 of 8609
Quote:
Originally Posted by HowYesNo View Post

i think i got ti now. i set turbo voltage to +0.035. run prime for 12.5 hour, no error o whea error, stable max temp 70C Vcore max at 1.224

Impressive, nice work
post #8609 of 8609
tx. this guide is great. helped a lot. i didn't see many people with same board though.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Complete Overclocking Guide: Sandy Bridge & Ivy Bridge | *ASRock Edition*