Overclock.net › Forums › Case Mods & Cases › Computer Cases › Cooler Master Cosmos 2 Club
New Posts  All Forums:Forum Nav:

Cooler Master Cosmos 2 Club - Page 291

post #2901 of 4663
7/20/12 at 10:41am
dont have dremel never had the use of it. i just have a drill

Quote:
Originally Posted by TR4Y View Post

Dont quote me but i think i used 1/8 or smaller i cant remember. The bottom rivets, i had a big drill so i had to do it at and angle. The longer the bet the better though.

how would recognize the drill bit all my drill bits are pretty old have lost their markings.

if i go to the local hardware shop what shall i ask for 1/8 drill bit are the measurement different in the UK im noob when comes to measurements im new to all this.

for now could i use the back end of the drill bit to size up the rivet head.

does the hole need to be smaller then the rivet or bigger?
Edited by PurE GaminG - 7/20/12 at 10:58am
Reply
Reply

Gear mentioned in this thread:

post #2902 of 4663
7/20/12 at 12:26pm
Quote:
Originally Posted by PurE GaminG View Post

dont have dremel never had the use of it. i just have a drill
how would recognize the drill bit all my drill bits are pretty old have lost their markings.
if i go to the local hardware shop what shall i ask for 1/8 drill bit are the measurement different in the UK im noob when comes to measurements im new to all this.
for now could i use the back end of the drill bit to size up the rivet head.
does the hole need to be smaller then the rivet or bigger?

i juat got a screw driver and a hammer it worked fine..
Vishera Fan Boi Slayer
(19 items)
  		  
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
View all
  hide details  
Reply
Vishera Fan Boi Slayer
(19 items)
  		  
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
View all
  hide details  
Reply
post #2903 of 4663
7/20/12 at 12:30pm
Well my gift showed up today and Im really happy. 2x 120 blue SickleFlow. CM customer support/server is FAN-FRICKING-TASTIC! thumbsupsmiley.png
Allanon
(18 items)
  		  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K Maximus IV Extreme-Z PNY NVIDIA GeForce 9800 GT  G.Skill Ripjaw X 16GB 2133 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Vertex 3 120gb OCZ Vertex 3 60gb WD Cavaleer Green 2tb SATA III CD/DVD burner 
CoolingOSMonitorMonitor
CM Hyper 212 EVO Windows 7 64bit Acer 23" H233H 1080p Dell 1907FP 
KeyboardPowerCaseMouse
Logitech G510 Corsair AX850 CM Cosmos II Logitech G500 
AudioOther
Logitech G930 Logitech G13 
View all
  hide details  
Reply
Allanon
(18 items)
  		  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K Maximus IV Extreme-Z PNY NVIDIA GeForce 9800 GT  G.Skill Ripjaw X 16GB 2133 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Vertex 3 120gb OCZ Vertex 3 60gb WD Cavaleer Green 2tb SATA III CD/DVD burner 
CoolingOSMonitorMonitor
CM Hyper 212 EVO Windows 7 64bit Acer 23" H233H 1080p Dell 1907FP 
KeyboardPowerCaseMouse
Logitech G510 Corsair AX850 CM Cosmos II Logitech G500 
AudioOther
Logitech G930 Logitech G13 
View all
  hide details  
Reply
post #2904 of 4663
7/20/12 at 1:36pm
Quote:
Originally Posted by Hokies83 View Post

i juat got a screw driver and a hammer it worked fine..

lol are you serious, i need to take everything apart to to prep and the part for paint.

did you cause any damage to your parts with screwdriver, did you hammer it in.

i think il go with drill but i dont know exactly which drill bit to ask for at the shop. 1/8 = 3mm?
Reply
Reply
post #2905 of 4663
7/20/12 at 1:38pm
No hammer and flat head screw driver were very easy...
Vishera Fan Boi Slayer
(19 items)
  		  
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
View all
  hide details  
Reply
Vishera Fan Boi Slayer
(19 items)
  		  
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
View all
  hide details  
Reply
post #2906 of 4663
7/20/12 at 1:47pm
Quote:
Originally Posted by PurE GaminG View Post

lol are you serious, i need to take everything apart to to prep and the part for paint.
did you cause any damage to your parts with screwdriver, did you hammer it in.
i think il go with drill but i dont know exactly which drill bit to ask for at the shop. 1/8 = 3mm?

Take the 1/8 drill bit and place the back side of the bit over the rivet. It needs to be just slightly lager tha the inside diameter of the rivet. Choose the next larger or smaller bit according the size of the rivet. All you are trying to do is cut the lip of the rivet off so that the rest of the rivet will drop out of the hole. It's really very simple
My CHVF
(14 items)
  		  
CPUMotherboardGraphicsRAM
AMD FX-8350 4917 MHz @ 1.51v Prime Stable Crosshair V Formula 2X Sapphire Radeon HD 7950 OC Edition in Crossfire GSKILL F3-17000CL11D-8GBSR 16GB @2133 
Hard DriveHard DriveOptical DriveCooling
3Crucial 128 GB in RAID0 2 WDC WD 1002FAEX 1TB Data RAID0 SATA 3 LG WH12LS39 Blue ray XSPC Raystorm RX240 Extreme Universal CPU Water... 
OSMonitorKeyboardPower
Win 7 Home Premium 64 bit 42' Syvania HDLCD 1920x1080 Logitech G110 Enermax Revolution 85+ 1020W 
CaseAudio
Cooler Master COSMOS II Realtek 
View all
  hide details  
Reply
My CHVF
(14 items)
  		  
CPUMotherboardGraphicsRAM
AMD FX-8350 4917 MHz @ 1.51v Prime Stable Crosshair V Formula 2X Sapphire Radeon HD 7950 OC Edition in Crossfire GSKILL F3-17000CL11D-8GBSR 16GB @2133 
Hard DriveHard DriveOptical DriveCooling
3Crucial 128 GB in RAID0 2 WDC WD 1002FAEX 1TB Data RAID0 SATA 3 LG WH12LS39 Blue ray XSPC Raystorm RX240 Extreme Universal CPU Water... 
OSMonitorKeyboardPower
Win 7 Home Premium 64 bit 42' Syvania HDLCD 1920x1080 Logitech G110 Enermax Revolution 85+ 1020W 
CaseAudio
Cooler Master COSMOS II Realtek 
View all
  hide details  
Reply
post #2907 of 4663
7/20/12 at 1:47pm
Quote:
Originally Posted by Hokies83 View Post

No hammer and flat head screw driver were very easy...

Hokies ive sent you pm
Reply
Reply
post #2908 of 4663
7/20/12 at 1:55pm
Quote:
Originally Posted by Roadking View Post

Take the 1/8 drill bit and place the back side of the bit over the rivet. It needs to be just slightly lager tha the inside diameter of the rivet. Choose the next larger or smaller bit according the size of the rivet. All you are trying to do is cut the lip of the rivet off so that the rest of the rivet will drop out of the hole. It's really very simple


what is cosmos 2 rivet size, i know how to de-rivet the rivet but wasn't sure about the size of the drill bit so many people use different drill bits size. so i though il ask here because all the cosmos 2 rivets are the same.

so when i go to the local hardware store should i ask for the 1/8 drill bit is this measurement different in different country's or is it generic measurement for all, im from the UK.

by the way thanks for the help
Reply
Reply
post #2909 of 4663
7/20/12 at 2:06pm
Sorry, I thought you had access to more than one bit. I would assume that it is a standard 1/8 rivet but dont know for sure. You could always Carefully try the hammer method on the first one and measure it when you get it out. Rivets are usually pretty soft and easy to remove.
My CHVF
(14 items)
  		  
CPUMotherboardGraphicsRAM
AMD FX-8350 4917 MHz @ 1.51v Prime Stable Crosshair V Formula 2X Sapphire Radeon HD 7950 OC Edition in Crossfire GSKILL F3-17000CL11D-8GBSR 16GB @2133 
Hard DriveHard DriveOptical DriveCooling
3Crucial 128 GB in RAID0 2 WDC WD 1002FAEX 1TB Data RAID0 SATA 3 LG WH12LS39 Blue ray XSPC Raystorm RX240 Extreme Universal CPU Water... 
OSMonitorKeyboardPower
Win 7 Home Premium 64 bit 42' Syvania HDLCD 1920x1080 Logitech G110 Enermax Revolution 85+ 1020W 
CaseAudio
Cooler Master COSMOS II Realtek 
View all
  hide details  
Reply
My CHVF
(14 items)
  		  
CPUMotherboardGraphicsRAM
AMD FX-8350 4917 MHz @ 1.51v Prime Stable Crosshair V Formula 2X Sapphire Radeon HD 7950 OC Edition in Crossfire GSKILL F3-17000CL11D-8GBSR 16GB @2133 
Hard DriveHard DriveOptical DriveCooling
3Crucial 128 GB in RAID0 2 WDC WD 1002FAEX 1TB Data RAID0 SATA 3 LG WH12LS39 Blue ray XSPC Raystorm RX240 Extreme Universal CPU Water... 
OSMonitorKeyboardPower
Win 7 Home Premium 64 bit 42' Syvania HDLCD 1920x1080 Logitech G110 Enermax Revolution 85+ 1020W 
CaseAudio
Cooler Master COSMOS II Realtek 
View all
  hide details  
Reply
post #2910 of 4663
7/20/12 at 2:38pm
guys do i need to use the flat screwdriver on side of the rivet




or use Phillips screwdriver on the rivet head



?
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases

Gear mentioned in this thread:

Overclock.net › Forums › Case Mods & Cases › Computer Cases › Cooler Master Cosmos 2 Club