Overclock.net › Forums › Case Mods & Cases › Computer Cases › Cooler Master Cosmos 2 Club
New Posts  All Forums:Forum Nav:

Cooler Master Cosmos 2 Club - Page 424

post #4231 of 6036
Quote:
Originally Posted by Red1776 View Post

I will add mine for your consideration:

1 x Alphacool NexXxos XT 45mm x 360mm pull/Excalibur fans (roof)
2 x Alphacool NexXxos XT 45mm x 240mm Push/pull Excalibur fans (lower section)
1 x Alphacool NexXxos XT 45mm x 120mm push/pull (rear exhaust) Cougar fans
2 x D5 pumps
4 x Heatkiller X-3 7970 blocks/ A380 CPU Block
1 x DD 'RAD' resevoir

I started with the cougar fans (2.2 mmH2O) and then swithced to the Excalibur (3.53mm H2O) i highly recommend them. the static pressure is tremendous.

Hope that is of some use. smile.gif

I will go with 3 x 240mm 80mm tick monsta two will go down in sandwich push pull combination and one on top in push pull and that is 52 600 cooling area and your combination is 32 400 cooling area.
For some 15 days i will start modding and put pictures here,also will include preparation for chiller, and intention is to keep some only 6 degree lover temp then room because of condensate.
smile.gifthumb.gifthumb.gif
Edited by GTX 690 SLI - 1/30/13 at 8:38pm
post #4232 of 6036
Quote:
Originally Posted by GTX 690 SLI View Post

I will go with 3 x 240mm 80mm tick monsta two will go down in sandwich combination and one on top in push pull and that is 52 600 cooling area and your combination is 32 400 cooling area.
For some 15 days i will start modding and put pictures here,also will include preparation for chiller, and intention is to keep some only 6 degree lover temp then room because of condensate.
smile.gifthumb.gifthumb.gif



Good luck since the 80mm is impossible without putting it directly inside the top mounting area. Its the only way it will fit....
post #4233 of 6036
I am going to cut upper cover you will se my plan i hope will be nice??
something like this but much more nice
post #4234 of 6036
I've set my non-reference gpu's, h100 and some misc computer and hifi parts up for sale and if it goes well ill buy two evga gtx 670 ftw an wc components with a total value of 2k usd smile.gif can't wait! Planning a triple outside res mount, and making it a crazy alchemist inspired rig biggrin.gif

Have any of you some experience in fans without the housing?
evolv
(22 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790k msi z97m GTX 1080 corsair vengeance pro 
Hard DriveCoolingCoolingCooling
samsung evo  ek coolstream PE 240 ek coolstream PE 240 DDC pump 
CoolingCoolingCoolingOS
ek supremacy evo ek GTX 1080 full cover block  EK vardar F1 windows 10 pro 
MonitorMonitorMonitorKeyboard
Philips 40" 4K LED BDM4065UC/00 GW2750 GW2750 CM masterkeys TKL 
PowerCaseMouseMouse Pad
corsair ax1200 phanteks enthoo evolv mATX razer naga qpad xxl 
AudioAudio
ASUS ROG xonar phoebus Sennheiser HD600 
  hide details  
Reply
evolv
(22 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790k msi z97m GTX 1080 corsair vengeance pro 
Hard DriveCoolingCoolingCooling
samsung evo  ek coolstream PE 240 ek coolstream PE 240 DDC pump 
CoolingCoolingCoolingOS
ek supremacy evo ek GTX 1080 full cover block  EK vardar F1 windows 10 pro 
MonitorMonitorMonitorKeyboard
Philips 40" 4K LED BDM4065UC/00 GW2750 GW2750 CM masterkeys TKL 
PowerCaseMouseMouse Pad
corsair ax1200 phanteks enthoo evolv mATX razer naga qpad xxl 
AudioAudio
ASUS ROG xonar phoebus Sennheiser HD600 
  hide details  
Reply
post #4235 of 6036
Quote:
Originally Posted by Roxycon View Post

I've set my non-reference gpu's, h100 and some misc computer and hifi parts up for sale and if it goes well ill buy two evga gtx 670 ftw an wc components with a total value of 2k usd smile.gif can't wait! Planning a triple outside res mount, and making it a crazy alchemist inspired rig biggrin.gif

Have any of you some experience in fans without the housing?

get cougars or sickleflows plain and simple cougars are better though. thumb.gif
post #4236 of 6036
Quote:
Originally Posted by GTX 690 SLI View Post

I am going to cut upper cover you will se my plan i hope will be nice??
something like this but much more nice




GOT MILK ? my version of a white theme.
seashell
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k asus maximus IV gene-z evga gtx 580 G.SKILL 16 GIG DDR3 2133 
Hard DriveOptical DriveCoolingOS
OCZ SSD 120 GB ASUS DVD  CORSAIR H50 WINDOW 7 64 BIT 
MonitorKeyboardPowerCase
DELL 30 INCH LOGITECH G15 OCZ ZX 850 Lian Li pc-u6 
Mouse
logitech G9X 
  hide details  
Reply
seashell
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k asus maximus IV gene-z evga gtx 580 G.SKILL 16 GIG DDR3 2133 
Hard DriveOptical DriveCoolingOS
OCZ SSD 120 GB ASUS DVD  CORSAIR H50 WINDOW 7 64 BIT 
MonitorKeyboardPowerCase
DELL 30 INCH LOGITECH G15 OCZ ZX 850 Lian Li pc-u6 
Mouse
logitech G9X 
  hide details  
Reply
post #4237 of 6036
seashell
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k asus maximus IV gene-z evga gtx 580 G.SKILL 16 GIG DDR3 2133 
Hard DriveOptical DriveCoolingOS
OCZ SSD 120 GB ASUS DVD  CORSAIR H50 WINDOW 7 64 BIT 
MonitorKeyboardPowerCase
DELL 30 INCH LOGITECH G15 OCZ ZX 850 Lian Li pc-u6 
Mouse
logitech G9X 
  hide details  
Reply
seashell
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k asus maximus IV gene-z evga gtx 580 G.SKILL 16 GIG DDR3 2133 
Hard DriveOptical DriveCoolingOS
OCZ SSD 120 GB ASUS DVD  CORSAIR H50 WINDOW 7 64 BIT 
MonitorKeyboardPowerCase
DELL 30 INCH LOGITECH G15 OCZ ZX 850 Lian Li pc-u6 
Mouse
logitech G9X 
  hide details  
Reply
post #4238 of 6036
Thanks for the loop suggestions,

So decided on the reccomended setup:

EX 360 Top
Raystorm block cpu block
2 x Alphacool NexXxos XT 45mm x 240mm Bot or the Monsta if can fit
Alphacool NexXxoS Monsta Single 120mm Radiator - 80mm Thick!! Exhaust
2x mcp655 pumps
1 x DD 'RAD' resevoir or similar need help with the size for this kind of loop.

The fittings and other parts I still have no clue, so if you guys could help me pick them that would be great!

P.S.
Edited by Brianmz - 1/31/13 at 3:26pm
post #4239 of 6036
Quote:
Originally Posted by Brianmz View Post

Thanks for the loop suggestions,

So decided on the reccomended setup:

EX 360 Top
Raystorm block cpu block
2 x Alphacool NexXxos XT 45mm x 240mm Bot or the Monsta if can fit
Alphacool NexXxoS Monsta Single 120mm Radiator - 80mm Thick!! Exhaust
2x mcp655 pumps
1 x DD 'RAD' resevoir or similar need help with the size for this kind of loop.

The fittings and other parts I still have no clue, so if you guys could help me pick them that would be great!

P.S.

In the talks with another OCN member to buy a delidded 3770k and asus MIVE, since knowing my luck i would just kill the 3770k if i tried to do it myself >.<</div>

Nice! and for fitting get 1/4 threaded and then pick the sizes along with your tubing. then for the fitting compression fittings are the absolute best in my mind. thumb.gif
post #4240 of 6036
Yeah, going to place the order soon, just need to know the reservoir size, and if i need 2.
Another thing, i read it's better to put in a single loop with the 2 pumps for redundancy.
And can i just start the loop with the CPU and then add in the gpus, and how will i go on about it, going to order everything, and then just buy Hydrocoppers GTX 780s or Titans preferably if it's real and add them to the loop.

Thanks!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › Cooler Master Cosmos 2 Club