Since this is an ongoing an pretty annoying issue, I decided that I wanted to try an analyze this a little deeper.
To do so I need data, which is why I would like everyone to send an e-mail with the following data to: firstname.lastname@example.org
1: is your tube slightly clouded, clouded, clouded to the point where it fully blocks vision or not clouded.
2: which metals are present in your loop (not from biocide, so no silver from killcoil or cobber from Nuke)
3: What material do your resoir consist of: acryl, something else, or you dont use one.
4: what kind of tube do you use: plz state as detailed as possible including brand, size, subtype and aproximate date of purchase.
5: what coolant do you use
6: which biocide do you use (list killcoils here)
7: which dyes do you use
8: any other additives
9: for how long have the system been running with the current tubes
10: average ambient temperature in the room where the Pc is
11: water temp during runtime
12: flushing method: tap water, tap water then distilled, tap + distilled with weak acid (vinegar or citric acid), filtered water, no flushing
13: did you reuse any parts from a previous build (state which)
14: corrosion: any signs of corrosion
15: Ph of coolant: no data, below 6, 6 to 8, above 8.
plz submit data even if you dont have any issues, otherwise this wont show anything
if you have suggestions for other things we might need to include, plz feel free to suggest them.
plz excuse my lacking english, i am not a native speaker.