Originally Posted by Kaxtos
I got inspired my many talented users that inserted their PC in their Desk so i came up with the easiest and most fisible one that i could do, trust me its much harder than it looks. I have posted another post about a month ago with another idea i had but it was much much harder, impossible to do
so i came up with the below idea that i have already started.
IKEA GALANT BEFORE:
IKEA GALANT AFTER:A few parts that have arrived yesterday:
2x Spectre Pro Led 230mm
Buttons for Power on/off ect and red cable sleeving
Touch MonitorLOG PICTURES:DAY1
Old case i had, using it to mount the Motherboard on.
Case after cutting it to pieces , Motherboard Mounting , DVD-ROM Cases, Touch screen Case
Cut the first circle for the Fans
Cutting a mold to get the curve of the desk, so not to make a mistake while cutting the actual MDF wood.
Bottom desk part plus part of the topFEW CHANGES
: Add the bellow Hot Swap Trays were i added the red circle on the picture
2x 3.5 HDD
2x 2.5 SSD HDDChange 2
: the Left side corner was going to be done by wood, but changed it to plexi glassDAY 2
Making the holes for Motherboard, PSU, DVD-ROM, Touch Screen and Hotswap HDDs
It may seem that not much work was done on day 2 but there was lots of measurements that took lots of time and precise cutting.
Will work on it in the afternoon again, should be able to upload a complete picture of the desk by tonight (not painted of course and no plexi glass) but you will be able to get an idea of what the desk will look like when completeDAY 3
Assembling parts of the desk, still lots of pieced not completed.
Checking if fans fit in desk (Lol i would like to hope so after all that work
Cutting the Wood were the buttons , DVD-ROMs, Touch Screen and HDD Hot swaps are going to be inserted.
Going to rest for a few days, maybe ill work on it in the weekend but don't know yet