Overclock.net › Forums › Overclockers Care › Overclock.net Folding@Home Team › HPCS Folding Setup Guide
New Posts  All Forums:Forum Nav:

HPCS Folding Setup Guide - Page 25  

post #241 of 375
Thanks smile.gif
 
Play Server
(10 items)
 
NAS
(14 items)
 
CPUCPUMotherboardRAM
Intel Xeon L5640 Intel Xeon L5640 Dell R710 Mobo Hynix 144GB DDR3 ECC PC3L-10600R 
Hard DrivePowerCaseOther
Intel X25-M G2 80GB Redundant 840W PSU Dell 710 2.5" - Google Search Appliance Dell Perc H700 Raid Controller 
OtherOther
Dell iDRAC6 Enterprise Mellanox Connectx-2 10Gb SFP+ NIC 
CPUCPUMotherboardRAM
Intel Xeon E5-2670 v1 Intel Xeon E5-2670 v1 SuperMicro X9DRL-iF 64GB Kingston ECC (kvr16r11d4/16HA) 
Hard DriveHard DriveHard DriveCooling
12x 4TB HGST 5K4000 SanDisk SSD 960GB (cache) 6x 8TB WD Red Scythe AP-29 
CoolingOSPowerCase
2x Noctua U9DXi4 FreeNAS Corsair AX750 Norco RPC-4224 
OtherOther
3x LSI 9211-8i (HBA) Mellanox Connectx-2 10Gb NIC 
  hide details  
 
Play Server
(10 items)
 
NAS
(14 items)
 
CPUCPUMotherboardRAM
Intel Xeon L5640 Intel Xeon L5640 Dell R710 Mobo Hynix 144GB DDR3 ECC PC3L-10600R 
Hard DrivePowerCaseOther
Intel X25-M G2 80GB Redundant 840W PSU Dell 710 2.5" - Google Search Appliance Dell Perc H700 Raid Controller 
OtherOther
Dell iDRAC6 Enterprise Mellanox Connectx-2 10Gb SFP+ NIC 
CPUCPUMotherboardRAM
Intel Xeon E5-2670 v1 Intel Xeon E5-2670 v1 SuperMicro X9DRL-iF 64GB Kingston ECC (kvr16r11d4/16HA) 
Hard DriveHard DriveHard DriveCooling
12x 4TB HGST 5K4000 SanDisk SSD 960GB (cache) 6x 8TB WD Red Scythe AP-29 
CoolingOSPowerCase
2x Noctua U9DXi4 FreeNAS Corsair AX750 Norco RPC-4224 
OtherOther
3x LSI 9211-8i (HBA) Mellanox Connectx-2 10Gb NIC 
  hide details  
post #242 of 375
I'm beginning to think these servers can't handle big adv. Another one of them has dropped to 1:20 tpf.
Fearless~
(20 items)
 
The Intel Side
(18 items)
 
 
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1090T @ 3.8 Asus Sabertooth 990FX EVGA GrillForce GTX 465 SLI Mushkin Blackline 2x4gb 1600mhz [1.5v] 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Vertex 3 120GB WD Caviar Black (1002FAEX)1TB Synology DS210J (4tb) Lite-on DVD Rewriter 16x IDE External 
CoolingOSMonitorKeyboard
Noctua NH-D14 Windows 7 Home Premium x64 Samsung Syncmaster E2320 Metadot Das Professional S Silent 
PowerCaseMouseMouse Pad
Corsair TX 850 V1 [Original PSH] NZXT Gamma Classic Series Mid-Tower Logitech VX Revolution Razer Sphex 
AudioAudioAudioAudio
Asus Xonar DX Klipsch Promedia 2.1 Bose Triport/Klipsch S3 Blue Snowball 
CPUMotherboardGraphicsRAM
Intel i3 2100 Gigabyte H61M-S2PV Asus GT430 Corsair XMS3 2x2gb 1333mhz 
Hard DriveHard DriveHard DriveOptical Drive
Intel X-25V 40GB Synology DS210j (4tb) Seagate Barracuda 120gb LG CH12LS28 Blu Ray  
CoolingOSOSMonitor
Thermalright X-Silent 120 Mac OS X 10.8.2 Windows 7 Ultimate x64 Toshiba 46VX700VU 
KeyboardPowerCaseMouse
Microsoft Wireless Optical Desktop 700 XFX 450w Core Edition Silverstone ML03B Microsoft Wireless Optical Desktop 700 
AudioAudio
Realtek Onboard Klipsch Promedia 2.1 
CPUMotherboardGraphicsRAM
Core 2 Duo P8700 2.53ghz Apple Logic Board Nvidia Geforce 9400m 4gb @1066 
Hard DriveHard DriveOptical DriveOS
Western Digital Scorpio Black 320gb Synology DS210j (4tb) Apple SuperDrive Mac OS X 10.8.4/Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
13" 1280x800 Glossy Backlit Apple Keyboard/OCN Ducky Tenkeyless [MX... 65w Magsafe Aluminium Unibody 
MouseAudioAudio
Apple Trackpad/Logitech MX310 Fiio A1 + Sony Bookshelf Blue Snowball 
  hide details  
Fearless~
(20 items)
 
The Intel Side
(18 items)
 
 
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1090T @ 3.8 Asus Sabertooth 990FX EVGA GrillForce GTX 465 SLI Mushkin Blackline 2x4gb 1600mhz [1.5v] 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Vertex 3 120GB WD Caviar Black (1002FAEX)1TB Synology DS210J (4tb) Lite-on DVD Rewriter 16x IDE External 
CoolingOSMonitorKeyboard
Noctua NH-D14 Windows 7 Home Premium x64 Samsung Syncmaster E2320 Metadot Das Professional S Silent 
PowerCaseMouseMouse Pad
Corsair TX 850 V1 [Original PSH] NZXT Gamma Classic Series Mid-Tower Logitech VX Revolution Razer Sphex 
AudioAudioAudioAudio
Asus Xonar DX Klipsch Promedia 2.1 Bose Triport/Klipsch S3 Blue Snowball 
CPUMotherboardGraphicsRAM
Intel i3 2100 Gigabyte H61M-S2PV Asus GT430 Corsair XMS3 2x2gb 1333mhz 
Hard DriveHard DriveHard DriveOptical Drive
Intel X-25V 40GB Synology DS210j (4tb) Seagate Barracuda 120gb LG CH12LS28 Blu Ray  
CoolingOSOSMonitor
Thermalright X-Silent 120 Mac OS X 10.8.2 Windows 7 Ultimate x64 Toshiba 46VX700VU 
KeyboardPowerCaseMouse
Microsoft Wireless Optical Desktop 700 XFX 450w Core Edition Silverstone ML03B Microsoft Wireless Optical Desktop 700 
AudioAudio
Realtek Onboard Klipsch Promedia 2.1 
CPUMotherboardGraphicsRAM
Core 2 Duo P8700 2.53ghz Apple Logic Board Nvidia Geforce 9400m 4gb @1066 
Hard DriveHard DriveOptical DriveOS
Western Digital Scorpio Black 320gb Synology DS210j (4tb) Apple SuperDrive Mac OS X 10.8.4/Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
13" 1280x800 Glossy Backlit Apple Keyboard/OCN Ducky Tenkeyless [MX... 65w Magsafe Aluminium Unibody 
MouseAudioAudio
Apple Trackpad/Logitech MX310 Fiio A1 + Sony Bookshelf Blue Snowball 
  hide details  
post #243 of 375
my 8 core servers on az1 are giving an 11min tpf on smp......................the 4 core has a lower tpf than that, might just create a bunch of 4 cores
Scrap
(11 items)
 
  
CPUCPUMotherboardGraphics
Xenon e5-2670 V1 Xenon e5-2670 V1 Lenovo D30 Motherboard Sapphire r9 290 TRI-X OC 
RAMHard DriveHard DriveHard Drive
Hynix PC3-12800R 4x16gb Samsung 850 EVO 500gb FusionIO 320gb PCI-e SSD Seagate Barracuda ST4000 
CoolingPowerCase
Custom Loop OCZ Fatal1ty 750w Thermaltake Core x9 
  hide details  
Scrap
(11 items)
 
  
CPUCPUMotherboardGraphics
Xenon e5-2670 V1 Xenon e5-2670 V1 Lenovo D30 Motherboard Sapphire r9 290 TRI-X OC 
RAMHard DriveHard DriveHard Drive
Hynix PC3-12800R 4x16gb Samsung 850 EVO 500gb FusionIO 320gb PCI-e SSD Seagate Barracuda ST4000 
CoolingPowerCase
Custom Loop OCZ Fatal1ty 750w Thermaltake Core x9 
  hide details  
post #244 of 375
There are definitely some servers that work better than others.

243
post #245 of 375
Quote:
Originally Posted by Extreme Newbie View Post

There are definitely some servers that work better than others.
243

Seems to be kinda luck of the draw
Scrap
(11 items)
 
  
CPUCPUMotherboardGraphics
Xenon e5-2670 V1 Xenon e5-2670 V1 Lenovo D30 Motherboard Sapphire r9 290 TRI-X OC 
RAMHard DriveHard DriveHard Drive
Hynix PC3-12800R 4x16gb Samsung 850 EVO 500gb FusionIO 320gb PCI-e SSD Seagate Barracuda ST4000 
CoolingPowerCase
Custom Loop OCZ Fatal1ty 750w Thermaltake Core x9 
  hide details  
Scrap
(11 items)
 
  
CPUCPUMotherboardGraphics
Xenon e5-2670 V1 Xenon e5-2670 V1 Lenovo D30 Motherboard Sapphire r9 290 TRI-X OC 
RAMHard DriveHard DriveHard Drive
Hynix PC3-12800R 4x16gb Samsung 850 EVO 500gb FusionIO 320gb PCI-e SSD Seagate Barracuda ST4000 
CoolingPowerCase
Custom Loop OCZ Fatal1ty 750w Thermaltake Core x9 
  hide details  
post #246 of 375
I'm not sure if I have it working. I followed the guide and I got thsi after the last command.
Code:
root@server-50741:~# cd fah
root@server-50741:~/fah# nohup ./fah6 -smp x -bigadv &
[1] 957
root@server-50741:~/fah# nohup: ignoring input and appending output to `nohup.out'

[1]+  Done                    nohup ./fah6 -smp x -bigadv

How can I tell if its working properly?

EDIT: I tried the top command and got this, but it may as well be greek for all I can tell from it.
Code:
top - 06:04:25 up 29 min,  1 user,  load average: 0.00, 0.01, 0.05
Mem:  33014720k total,   683464k used, 32331256k free,     7648k buffers
Swap:        0k total,        0k used,        0k free,    48044k cached

  PID USER      PR  NI  VIRT  RES  SHR S %MEM %CPU    TIME+  COMMAND            
   32 root      20   0     0    0    0 S  0.0    0   0:00.02 events/5           
  966 root      20   0 19276 1312  944 R  0.0    0   0:01.34 top                
    1 root      20   0 23756 1888 1280 S  0.0    0   0:01.05 init               
    2 root      20   0     0    0    0 S  0.0    0   0:00.01 kthreadd           
    3 root      20   0     0    0    0 S  0.0    0   0:00.01 ksoftirqd/0        
    4 root      RT   0     0    0    0 S  0.0    0   0:00.00 migration/0        
    5 root      RT   0     0    0    0 S  0.0    0   0:00.00 watchdog/0         
    6 root      RT   0     0    0    0 S  0.0    0   0:00.01 migration/1        
    7 root      20   0     0    0    0 S  0.0    0   0:00.00 ksoftirqd/1        
    8 root      RT   0     0    0    0 S  0.0    0   0:00.00 watchdog/1         
    9 root      RT   0     0    0    0 S  0.0    0   0:00.01 migration/2        
   10 root      20   0     0    0    0 S  0.0    0   0:00.28 ksoftirqd/2        
   11 root      RT   0     0    0    0 S  0.0    0   0:00.00 watchdog/2         
   12 root      RT   0     0    0    0 S  0.0    0   0:00.07 migration/3        
   13 root      20   0     0    0    0 S  0.0    0   0:00.00 ksoftirqd/3        
   14 root      RT   0     0    0    0 S  0.0    0   0:00.00 watchdog/3         
   15 root      RT   0     0    0    0 S  0.0    0   0:00.01 migration/4        
   16 root      20   0     0    0    0 S  0.0    0   0:00.00 ksoftirqd/4        
   17 root      RT   0     0    0    0 S  0.0    0   0:00.00 watchdog/4

Edited by Philistine - 1/26/12 at 10:07pm
post #247 of 375
That's what you want to see..

To make sure it's working, two things you can do:
Code:
top

Will list all running processes, you can see fahcore running there, or:
Code:
tail -f FAHlog.txt

which will read and print the FAHlog.txt file over and over again in the terminal for you to see.. ctl-c to exit, but the client will continue to run after you close it.
post #248 of 375
So I put together some time saving bash scripts to greatly reduce the amount of typing to get everything including HFM up and running.

This isnt another instruction thread for actually getting into your servers, there are a few of those already.

Hope this helps some people that are still receiving their invites and setting up new servers. thumb.gif

http://www.overclock.net/t/1206178/hp-cloud-bash-scripts-for-fast-setup-f-h-and-hfm/0_40#post_16300621
Top Heavy
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-3570k ASUS P8z77-I Deluxe MSI GTX 980 Gaming 4G Samsung MV-3V4G3D 
Hard DriveCoolingOSMonitor
Samsung 840 Evo ThermalRight Macho Rev B Windows 7 Professional 64bit Samsung SyncMaster P2450 
KeyboardPowerCaseMouse
Logitech MX 3200 Rosewill GreenPower 630W Custom Built mITX bench made from the carcas of... Logitech M510 
Audio
Onboard 5.1 
  hide details  
Top Heavy
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-3570k ASUS P8z77-I Deluxe MSI GTX 980 Gaming 4G Samsung MV-3V4G3D 
Hard DriveCoolingOSMonitor
Samsung 840 Evo ThermalRight Macho Rev B Windows 7 Professional 64bit Samsung SyncMaster P2450 
KeyboardPowerCaseMouse
Logitech MX 3200 Rosewill GreenPower 630W Custom Built mITX bench made from the carcas of... Logitech M510 
Audio
Onboard 5.1 
  hide details  
post #249 of 375
Quote:
Originally Posted by Digigami View Post

That's what you want to see..

To make sure it's working, two things you can do:
Code:
top

Will list all running processes, you can see fahcore running there, or:
Code:
tail -f FAHlog.txt

which will read and print the FAHlog.txt file over and over again in the terminal for you to see.. ctl-c to exit, but the client will continue to run after you close it.

I tried the top command (see my edit in my first post) and I don't think the client is running.

OK tried the tail command got this
Code:
root@server-50741:~/fah# tail -f FAHlog.txt
[05:49:55] Configuring Folding@Home...


[05:52:03] - Ask before connecting: No
[05:52:03] - User name: Philistine (Team 37726)
[05:52:03] - User ID not found locally
[05:52:03] + Requesting User ID from server
[05:52:03] - Machine ID: 1
[05:52:03] 
[05:52:03] -configonly flag given, so exiting.

Looks like the client didn't start.

When I entered the final command to start the client I had got this
Code:
root@server-50741:~/fah# nohup ./fah6 -smp x -bigadv &
[1] 957
root@server-50741:~/fah# [B]nohup: ignoring input and appending output to `nohup.out'[/B]

[1]+  Done                    nohup ./fah6 -smp x -bigadv

It looks like it didn't like the nohup command.
Edited by Philistine - 1/26/12 at 10:16pm
post #250 of 375
Quote:
Originally Posted by Philistine View Post

I'm not sure if I have it working. I followed the guide and I got thsi after the last command. Warning: Spoiler! (Click to show)
Code:
root@server-50741:~# cd fah
root@server-50741:~/fah# nohup ./fah6 -smp x -bigadv &
[1] 957
root@server-50741:~/fah# nohup: ignoring input and appending output to `nohup.out'
[1]+  Done                    nohup ./fah6 -smp x -bigadv
How can I tell if its working properly?
EDIT: I tried the top command and got this, but it may as well be greek for all I can tell from it.
Code:
top - 06:04:25 up 29 min,  1 user,  load average: 0.00, 0.01, 0.05
Mem:  33014720k total,   683464k used, 32331256k free,     7648k buffers
Swap:        0k total,        0k used,        0k free,    48044k cached
  PID USER      PR  NI  VIRT  RES  SHR S %MEM %CPU    TIME+  COMMAND            
   32 root      20   0     0    0    0 S  0.0    0   0:00.02 events/5           
  966 root      20   0 19276 1312  944 R  0.0    0   0:01.34 top                
    1 root      20   0 23756 1888 1280 S  0.0    0   0:01.05 init               
    2 root      20   0     0    0    0 S  0.0    0   0:00.01 kthreadd           
    3 root      20   0     0    0    0 S  0.0    0   0:00.01 ksoftirqd/0        
    4 root      RT   0     0    0    0 S  0.0    0   0:00.00 migration/0        
    5 root      RT   0     0    0    0 S  0.0    0   0:00.00 watchdog/0         
    6 root      RT   0     0    0    0 S  0.0    0   0:00.01 migration/1        
    7 root      20   0     0    0    0 S  0.0    0   0:00.00 ksoftirqd/1        
    8 root      RT   0     0    0    0 S  0.0    0   0:00.00 watchdog/1         
    9 root      RT   0     0    0    0 S  0.0    0   0:00.01 migration/2        
   10 root      20   0     0    0    0 S  0.0    0   0:00.28 ksoftirqd/2        
   11 root      RT   0     0    0    0 S  0.0    0   0:00.00 watchdog/2         
   12 root      RT   0     0    0    0 S  0.0    0   0:00.07 migration/3        
   13 root      20   0     0    0    0 S  0.0    0   0:00.00 ksoftirqd/3        
   14 root      RT   0     0    0    0 S  0.0    0   0:00.00 watchdog/3         
   15 root      RT   0     0    0    0 S  0.0    0   0:00.01 migration/4        
   16 root      20   0     0    0    0 S  0.0    0   0:00.00 ksoftirqd/4        
   17 root      RT   0     0    0    0 S  0.0    0   0:00.00 watchdog/4


Stupid question but you did remove the x and replace it with 8 right?

Also try running
Code:
cd /fah
./fah6 -smp 8 -bigadv

That will just run it in the client and then you can see if you are getting any fah errors. Then once it starts you can ctrl+C and run
Code:
nohup ./fah6 -smp 8 -bigadv &
Top Heavy
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-3570k ASUS P8z77-I Deluxe MSI GTX 980 Gaming 4G Samsung MV-3V4G3D 
Hard DriveCoolingOSMonitor
Samsung 840 Evo ThermalRight Macho Rev B Windows 7 Professional 64bit Samsung SyncMaster P2450 
KeyboardPowerCaseMouse
Logitech MX 3200 Rosewill GreenPower 630W Custom Built mITX bench made from the carcas of... Logitech M510 
Audio
Onboard 5.1 
  hide details  
Top Heavy
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-3570k ASUS P8z77-I Deluxe MSI GTX 980 Gaming 4G Samsung MV-3V4G3D 
Hard DriveCoolingOSMonitor
Samsung 840 Evo ThermalRight Macho Rev B Windows 7 Professional 64bit Samsung SyncMaster P2450 
KeyboardPowerCaseMouse
Logitech MX 3200 Rosewill GreenPower 630W Custom Built mITX bench made from the carcas of... Logitech M510 
Audio
Onboard 5.1 
  hide details  
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Overclock.net Folding@Home Team
This thread is locked  
Overclock.net › Forums › Overclockers Care › Overclock.net Folding@Home Team › HPCS Folding Setup Guide