Need some help guys. The screw up with my card is that voltage control via software is impossible due to limitations being custom-set on the card by XFX (yeah they suck). Thus it's impossible to get my card beyond 840Mhz on the core, which sucks because I really need to help rack up a few more points for team OCN on HWbot 
I don't have a multimeter and i just want to know which resistor to shade and how much of it. It'd be a HUGE help if someone could just show me which point to shade (first time doing this and have NO knowledge). Also, i just want to increase the VDD and leave the Vmem alone.
Here's the PCB layout of my card:
http://img6.imageshack.us/img6/7505/dsc0692f.jpg
I don't have a multimeter and i just want to know which resistor to shade and how much of it. It'd be a HUGE help if someone could just show me which point to shade (first time doing this and have NO knowledge). Also, i just want to increase the VDD and leave the Vmem alone.
Here's the PCB layout of my card:
http://img6.imageshack.us/img6/7505/dsc0692f.jpg
Ol' Faithful
(15 items) | 
A pleasant surprise :)
Cooler Master USP 100 Black Edition | 
Value redefined.
Amd Athlon II X3 435 |
|
Ol' Faithful
(15 items) |
A pleasant surprise :)
Cooler Master USP 100 Black Edition |
Value redefined.
Amd Athlon II X3 435 |
Sure you can go ahead and not use one but then you would be guessing. Guessing it not good 
