Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Cooling › [Official] NVIDIA GPU Mod Club - AKA "The Mod"
New Posts  All Forums:Forum Nav:

[Official] NVIDIA GPU Mod Club - AKA "The Mod" - Page 139

post #1381 of 8626
Quote:
Originally Posted by waedoe View Post

Quote:
Originally Posted by Xinoxide View Post

They should both reach the front of your Antec 300. Where where you going to put the rads?

So right now i have a H100 in push pull mounted to the front i was thinking i could stack each of these radiators on the 240mm x 120mm h100 rad using 6 fans in push pull pull again im not sure how to sandwich this all together though lol

mount the 620's at a 90 degree angle to the H100.

With the H100 breathing in fresh air it wont warm up too much from your cpu. having the 620s mounted to receive the air fromt he H100 will only increase them a couple of degrees. I wouldnt even have a fan between them, I would imagine with the angle it would fit fine.

how well did the H100 fit the antec 300?
post #1382 of 8626
I know this has already been discussed here, but I just found it on sale on Newegg for 77$, pretty competitive I would say as it includes a fan as well.

Arctic Cooler Fluid Thing

Edit: Seems it's compatible with the GTX 670 as well.
post #1383 of 8626
Quote:
Originally Posted by Xinoxide View Post

mount the 620's at a 90 degree angle to the H100.
With the H100 breathing in fresh air it wont warm up too much from your cpu. having the 620s mounted to receive the air fromt he H100 will only increase them a couple of degrees. I wouldnt even have a fan between them, I would imagine with the angle it would fit fine.
how well did the H100 fit the antec 300?

Eh mounting them at a 90 degree angle would prove to be very trouble some, since theres no where to mount... well atleast on my case modded 300. The h100 fit fine i have a whole thread dedicated to modifying my case! Ive also found that i can use the brackets that came with the 620 to mount the 620 on the 580 smile.gif atleast i think i can. I should be able to get the plastic shroud back on the card as well! I'll document my progress this weekend right now im swamped with school work, good news is if you can make it to frys the 620's are on sale for 29.99 after 10 dollar MIR! regardless they are still 39.99 about 25 dollars cheaper than any where else!

I think this is what it is suppose to look like the link you had on new egg

http://www.arctic.ac/en/p/detail/index/sArticle/569/sCategory/2182

600
Edited by waedoe - 5/23/12 at 1:22am
ROFLCOPTER
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 2600k @ 4.3GHZ Gigabyte GA-Z68XP-UD4 EVGA 580 GTX 1.5GB EVGA 580 GTX 1.5GB 
RAMHard DriveOptical DriveCooling
G.Skill 12 Gig 9-9-9-24-2N 1600 128 Crucial M4 SSD + Samsung 1TB 7200 RPM Asus DVD/RW H100 CPU, H80 X2 GFX Card 
OSMonitorKeyboardPower
Windows 7 64bit Pro HP ZR30W IPS 30 inch I-Rocks kr6260 Antec 1200 Gold PSU 
CaseMouseMouse PadAudio
Antec 300 Logitech Preformance MX Generic Creative Titanium HD 
  hide details  
Reply
ROFLCOPTER
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 2600k @ 4.3GHZ Gigabyte GA-Z68XP-UD4 EVGA 580 GTX 1.5GB EVGA 580 GTX 1.5GB 
RAMHard DriveOptical DriveCooling
G.Skill 12 Gig 9-9-9-24-2N 1600 128 Crucial M4 SSD + Samsung 1TB 7200 RPM Asus DVD/RW H100 CPU, H80 X2 GFX Card 
OSMonitorKeyboardPower
Windows 7 64bit Pro HP ZR30W IPS 30 inch I-Rocks kr6260 Antec 1200 Gold PSU 
CaseMouseMouse PadAudio
Antec 300 Logitech Preformance MX Generic Creative Titanium HD 
  hide details  
Reply
post #1384 of 8626
Quote:
Originally Posted by Dwood View Post

Dang, looks like most everything is on the left
My 680 can hardly break 50c OCed to 1289 core

Any ideas then how i can cool those VRM's if i do the mod?
Intel Gaming PC
(17 items)
 
Playstation 4
(0 items)
 
CPUMotherboardGraphicsRAM
Intel i7 5930k @ 4.5ghz, 1.2v MSI X99A GodLike Gaming Carbon EVGA GTX 980 SC SLI Corsair Dominator Platinum 16GB DDR4 3000Mhz 
Hard DriveCoolingOSMonitor
Samsung EVO 840 250GB SSD, Seagate Barracuda 3T... Full custom watercooling loop Windows 10 Pro 64bit Acer XB271HU  
KeyboardPowerCaseMouse
Razer Blackwidow Chroma TE Corsair HX1050 Professional Series Corsair 760T White Roccat Kone XTD 
Mouse PadAudioAudioOther
Roccat Alumic Asus D2X Sound Card Bose Companion 5 Speakers NZXT Hue+ RGB Lighting  
Other
Logitech G25 Steering Wheel 
  hide details  
Reply
Intel Gaming PC
(17 items)
 
Playstation 4
(0 items)
 
CPUMotherboardGraphicsRAM
Intel i7 5930k @ 4.5ghz, 1.2v MSI X99A GodLike Gaming Carbon EVGA GTX 980 SC SLI Corsair Dominator Platinum 16GB DDR4 3000Mhz 
Hard DriveCoolingOSMonitor
Samsung EVO 840 250GB SSD, Seagate Barracuda 3T... Full custom watercooling loop Windows 10 Pro 64bit Acer XB271HU  
KeyboardPowerCaseMouse
Razer Blackwidow Chroma TE Corsair HX1050 Professional Series Corsair 760T White Roccat Kone XTD 
Mouse PadAudioAudioOther
Roccat Alumic Asus D2X Sound Card Bose Companion 5 Speakers NZXT Hue+ RGB Lighting  
Other
Logitech G25 Steering Wheel 
  hide details  
Reply
post #1385 of 8626
Quote:
Originally Posted by waedoe View Post

Quote:
Originally Posted by Xinoxide View Post

mount the 620's at a 90 degree angle to the H100.
With the H100 breathing in fresh air it wont warm up too much from your cpu. having the 620s mounted to receive the air fromt he H100 will only increase them a couple of degrees. I wouldnt even have a fan between them, I would imagine with the angle it would fit fine.
how well did the H100 fit the antec 300?

Eh mounting them at a 90 degree angle would prove to be very trouble some, since theres no where to mount... well atleast on my case modded 300. The h100 fit fine i have a whole thread dedicated to modifying my case! Ive also found that i can use the brackets that came with the 620 to mount the 620 on the 580 smile.gif atleast i think i can. I should be able to get the plastic shroud back on the card as well! I'll document my progress this weekend right now im swamped with school work, good news is if you can make it to frys the 620's are on sale for 29.99 after 10 dollar MIR! regardless they are still 39.99 about 25 dollars cheaper than any where else!

I took a ;ook t your antec 300 mod thread, very nice.

I am still convinced the 620's can mount right t the H100 at a 90 degree angle. something like what I have depicted in this ms-paint photoshopcoction.

700

even though they will receive the warm air from the H100, the H100 isnt very good, so the 620 temps will only go up a little bit. It will still GREATLY improve your gpu temps.

edit: personally, I would use velcro to hold them to each other.
Edited by Xinoxide - 5/23/12 at 4:22am
post #1386 of 8626
Quote:
Originally Posted by Darylrese View Post

Any ideas then how i can cool those VRM's if i do the mod?

i had them cooled by a 120mm fan on the side of my case, seemed to work fine but i had the shorter pcb 670
Junk
(14 items)
 
  
CPUMotherboardGraphicsRAM
2700K 4.6 Gigabyte Z68X-UD4 Msi R9 270X 8GB 1333 DDR3 
Hard DriveCoolingOSMonitor
SSD + 7 other drives H100 Windows 7 Ultimate 64-bit Asus 23in 
KeyboardPowerCaseMouse
Rosewill Mech EVGA 750 Rosewill Thor MX518 
Mouse Pad
Steelseries 
  hide details  
Reply
Junk
(14 items)
 
  
CPUMotherboardGraphicsRAM
2700K 4.6 Gigabyte Z68X-UD4 Msi R9 270X 8GB 1333 DDR3 
Hard DriveCoolingOSMonitor
SSD + 7 other drives H100 Windows 7 Ultimate 64-bit Asus 23in 
KeyboardPowerCaseMouse
Rosewill Mech EVGA 750 Rosewill Thor MX518 
Mouse Pad
Steelseries 
  hide details  
Reply
post #1387 of 8626
Quote:
Originally Posted by cyanmcleod View Post

i had them cooled by a 120mm fan on the side of my case, seemed to work fine but i had the shorter pcb 670

You say the mod made no difference to your temps atall??
Intel Gaming PC
(17 items)
 
Playstation 4
(0 items)
 
CPUMotherboardGraphicsRAM
Intel i7 5930k @ 4.5ghz, 1.2v MSI X99A GodLike Gaming Carbon EVGA GTX 980 SC SLI Corsair Dominator Platinum 16GB DDR4 3000Mhz 
Hard DriveCoolingOSMonitor
Samsung EVO 840 250GB SSD, Seagate Barracuda 3T... Full custom watercooling loop Windows 10 Pro 64bit Acer XB271HU  
KeyboardPowerCaseMouse
Razer Blackwidow Chroma TE Corsair HX1050 Professional Series Corsair 760T White Roccat Kone XTD 
Mouse PadAudioAudioOther
Roccat Alumic Asus D2X Sound Card Bose Companion 5 Speakers NZXT Hue+ RGB Lighting  
Other
Logitech G25 Steering Wheel 
  hide details  
Reply
Intel Gaming PC
(17 items)
 
Playstation 4
(0 items)
 
CPUMotherboardGraphicsRAM
Intel i7 5930k @ 4.5ghz, 1.2v MSI X99A GodLike Gaming Carbon EVGA GTX 980 SC SLI Corsair Dominator Platinum 16GB DDR4 3000Mhz 
Hard DriveCoolingOSMonitor
Samsung EVO 840 250GB SSD, Seagate Barracuda 3T... Full custom watercooling loop Windows 10 Pro 64bit Acer XB271HU  
KeyboardPowerCaseMouse
Razer Blackwidow Chroma TE Corsair HX1050 Professional Series Corsair 760T White Roccat Kone XTD 
Mouse PadAudioAudioOther
Roccat Alumic Asus D2X Sound Card Bose Companion 5 Speakers NZXT Hue+ RGB Lighting  
Other
Logitech G25 Steering Wheel 
  hide details  
Reply
post #1388 of 8626
it helped on temps, they went form 70 to around 50 but they max oc stayed the same and the noise level was the same so there was no point in it for me. you might have different results so try it and post back.
Junk
(14 items)
 
  
CPUMotherboardGraphicsRAM
2700K 4.6 Gigabyte Z68X-UD4 Msi R9 270X 8GB 1333 DDR3 
Hard DriveCoolingOSMonitor
SSD + 7 other drives H100 Windows 7 Ultimate 64-bit Asus 23in 
KeyboardPowerCaseMouse
Rosewill Mech EVGA 750 Rosewill Thor MX518 
Mouse Pad
Steelseries 
  hide details  
Reply
Junk
(14 items)
 
  
CPUMotherboardGraphicsRAM
2700K 4.6 Gigabyte Z68X-UD4 Msi R9 270X 8GB 1333 DDR3 
Hard DriveCoolingOSMonitor
SSD + 7 other drives H100 Windows 7 Ultimate 64-bit Asus 23in 
KeyboardPowerCaseMouse
Rosewill Mech EVGA 750 Rosewill Thor MX518 
Mouse Pad
Steelseries 
  hide details  
Reply
post #1389 of 8626
Quote:
Originally Posted by Xinoxide View Post

I took a ;ook t your antec 300 mod thread, very nice.
I am still convinced the 620's can mount right t the H100 at a 90 degree angle. something like what I have depicted in this ms-paint photoshopcoction.
700
even though they will receive the warm air from the H100, the H100 isnt very good, so the 620 temps will only go up a little bit. It will still GREATLY improve your gpu temps.
edit: personally, I would use velcro to hold them to each other.

actually that velcro idea is a really good idea! i have some of that 3m interlocking stuff that can hold roughly 20 pounds super strong. also i see what you mean by 90 degrees now. at first i thought you meant perpendicular to the h100 not parrallel! thanks for the idea once i have time to work on it this weekend ill show you!
ROFLCOPTER
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 2600k @ 4.3GHZ Gigabyte GA-Z68XP-UD4 EVGA 580 GTX 1.5GB EVGA 580 GTX 1.5GB 
RAMHard DriveOptical DriveCooling
G.Skill 12 Gig 9-9-9-24-2N 1600 128 Crucial M4 SSD + Samsung 1TB 7200 RPM Asus DVD/RW H100 CPU, H80 X2 GFX Card 
OSMonitorKeyboardPower
Windows 7 64bit Pro HP ZR30W IPS 30 inch I-Rocks kr6260 Antec 1200 Gold PSU 
CaseMouseMouse PadAudio
Antec 300 Logitech Preformance MX Generic Creative Titanium HD 
  hide details  
Reply
ROFLCOPTER
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 2600k @ 4.3GHZ Gigabyte GA-Z68XP-UD4 EVGA 580 GTX 1.5GB EVGA 580 GTX 1.5GB 
RAMHard DriveOptical DriveCooling
G.Skill 12 Gig 9-9-9-24-2N 1600 128 Crucial M4 SSD + Samsung 1TB 7200 RPM Asus DVD/RW H100 CPU, H80 X2 GFX Card 
OSMonitorKeyboardPower
Windows 7 64bit Pro HP ZR30W IPS 30 inch I-Rocks kr6260 Antec 1200 Gold PSU 
CaseMouseMouse PadAudio
Antec 300 Logitech Preformance MX Generic Creative Titanium HD 
  hide details  
Reply
post #1390 of 8626
Let's talk fans, for those of you with fans cooling vrm, what fan are you using and how are you controlling it? Also what plugs are u guys using to power your coolers? They make adapters that convert from the stock fan plug on nvidia cards to a normal fan plug, allowing control from msi AF, do you think the cooler draws too much power for this to be safe?

Gathering parts for my mod(sli gtx-580's), and just looking for ideas on how I should go about powering and controlling fans and the cooler.
White Devil
(15 items)
 
  
CPUMotherboardGraphicsGraphics
3770k AsRock Extreme 3 Gen 3 EVGA GTX-580 EVGA GTX-580 
RAMHard DriveHard DriveCooling
GSkill Ripjaws Vertex 4 Mushkin Chronos Delux H100 
CoolingCoolingMonitorKeyboard
H60 H60 Asus 23" 120hz CMStorm Quickfire Pro 
PowerCaseMouse
Seasonic 1250w NZXT Switch 810 Mad Cats MMO7 
  hide details  
Reply
White Devil
(15 items)
 
  
CPUMotherboardGraphicsGraphics
3770k AsRock Extreme 3 Gen 3 EVGA GTX-580 EVGA GTX-580 
RAMHard DriveHard DriveCooling
GSkill Ripjaws Vertex 4 Mushkin Chronos Delux H100 
CoolingCoolingMonitorKeyboard
H60 H60 Asus 23" 120hz CMStorm Quickfire Pro 
PowerCaseMouse
Seasonic 1250w NZXT Switch 810 Mad Cats MMO7 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA Cooling
Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Cooling › [Official] NVIDIA GPU Mod Club - AKA "The Mod"