Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Cooling › [Official] NVIDIA GPU Mod Club - AKA "The Mod"
New Posts  All Forums:Forum Nav:

[Official] NVIDIA GPU Mod Club - AKA "The Mod" - Page 5

post #41 of 8626
I'll be putting that theory to the test regarding chip lapping one day. The chip is slightly rounded and is about .5mm thick so i figure I can shave half that away and be safe.....I think. I have a 560ti I will most probably never use again so it will become a test piggy.
post #42 of 8626
The die? or the heat spreader? I'm telling you the die shouldn't be concave at all. It should be perfectly flat, or else it probably wouldn't work.
They should be made on plates like this:
347
So it'd have to be perfectly flat or else it was manufactured wrong... I'm still confused
post #43 of 8626
So I'm considering doing this to my 570.....

So, as long as I leave the stock fan on with it around 50% speed then the vrm's and the ram will be 100% fine even when overclocking the ram and putting the voltage to 1.1v?
Edited by icehotshot - 2/1/12 at 9:35am
SB goodness
(14 items)
 
Core 2 duo
(9 items)
 
folder
(8 items)
 
CPUMotherboardGraphicsRAM
2500k @ 4.6ghz,1.47v 24/7 GIGABYTE GA-P67A-UD4-B3 $200 EVGA GTX 970 SSC @ 1505mhz 16gb 2400 SuperSC DDR3 
Hard DriveCoolingOSPower
960gb Sandisk Ultra II Corsair H100i v2 Windows 7 64-bit SeaSonic X650 Gold 
CaseMouseMouse Pad
Obsidian Series® 750D Airflow Edition Zowie FK 2 Speed by Surface/Steelseries SX/Steelseries 9HD 
CPUMotherboardGraphicsRAM
Core 2 Duo E6750 Asus P5n32-e SLI EVGA 8800gt superclocked @ 750/725 gaming/folding 4gb Fatal!ty ddr2 800 
Hard DriveCoolingOSPower
64gb SSD Stock Win 7 64 bit Corsair CX500 
Case
NZXT 
CPUMotherboardGraphicsRAM
Intel Pentium E6300 MSI G41M4-F GTX 460 2gb A-data ddr2 800 
Hard DriveOSPowerCase
150gb raptor Ubuntu 13.04 64-bit Coolmax 520W NZXT 
  hide details  
Reply
SB goodness
(14 items)
 
Core 2 duo
(9 items)
 
folder
(8 items)
 
CPUMotherboardGraphicsRAM
2500k @ 4.6ghz,1.47v 24/7 GIGABYTE GA-P67A-UD4-B3 $200 EVGA GTX 970 SSC @ 1505mhz 16gb 2400 SuperSC DDR3 
Hard DriveCoolingOSPower
960gb Sandisk Ultra II Corsair H100i v2 Windows 7 64-bit SeaSonic X650 Gold 
CaseMouseMouse Pad
Obsidian Series® 750D Airflow Edition Zowie FK 2 Speed by Surface/Steelseries SX/Steelseries 9HD 
CPUMotherboardGraphicsRAM
Core 2 Duo E6750 Asus P5n32-e SLI EVGA 8800gt superclocked @ 750/725 gaming/folding 4gb Fatal!ty ddr2 800 
Hard DriveCoolingOSPower
64gb SSD Stock Win 7 64 bit Corsair CX500 
Case
NZXT 
CPUMotherboardGraphicsRAM
Intel Pentium E6300 MSI G41M4-F GTX 460 2gb A-data ddr2 800 
Hard DriveOSPowerCase
150gb raptor Ubuntu 13.04 64-bit Coolmax 520W NZXT 
  hide details  
Reply
post #44 of 8626
Quote:
Originally Posted by icehotshot View Post

So I'm considering doing this to my 570.....
So, as long as I leave the stock fan on with it around 50% speed then the vrm's and the ram will be 100% fine even when overclocking the ram and putting the voltage to 1.1v?

is yes? where the problem is feasible
HAF-XB X-EXTREM
(18 items)
 
NZXT switch 810
(14 items)
 
vulcan
(18 items)
 
CPUMotherboardGraphicsGraphics
3770K @ 4.9GHZ MAXIMUS V Formula EVGA GTX 670 EVGA GTX 670 
RAMHard DriveHard DriveOptical Drive
patriot extreme seagate baracuda seagate baracuda SBO5 slot loading 
CoolingCoolingCoolingOS
XSPC EX 240 + EX 360 + reserator mod 600L/H ANTEC 920 + rad 120 ANTEC 920 + rad 180 ( Black Ice Micro Dual 80mm... W7 ultimate 
MonitorKeyboardPowerCase
ASUS ML248H G510 OCZ ZX 1250W CM HAF-XB 
MouseAudio
RAT 7 G35 
CPUMotherboardGraphicsGraphics
2600K oc 4.8GHZ maximus IV extreme TRI-SLI GTX 580 GTX 580 
GraphicsRAMCoolingCooling
GTX 580 corsair dominator corsair H100 antec 620 
CoolingCoolingKeyboardPower
antec 620 antec 620 g510 ocz 1250w 
CaseMouse
nzxt switch 810 g500 
CPUMotherboardGraphicsGraphics
I7 2600K OC 4.8Ghz 1.44V 24/7 ASUS maximus IV-Z gene GTX 580 GTX 580 
RAMHard DriveOptical DriveCooling
Corsair Dominator 4x2 go WD 1T / SSD M4 64gb ASUS DRW 24B1ST corsair H100 
CoolingCoolingOSMonitor
antec 620 GPU antec 620 GPU windows 7 ASUS ML248H 
KeyboardPowerCaseMouse
logitech G510 OCZ 1000w ZX NZXT Switch 810  G500 
Audio
CM sirus 
  hide details  
Reply
HAF-XB X-EXTREM
(18 items)
 
NZXT switch 810
(14 items)
 
vulcan
(18 items)
 
CPUMotherboardGraphicsGraphics
3770K @ 4.9GHZ MAXIMUS V Formula EVGA GTX 670 EVGA GTX 670 
RAMHard DriveHard DriveOptical Drive
patriot extreme seagate baracuda seagate baracuda SBO5 slot loading 
CoolingCoolingCoolingOS
XSPC EX 240 + EX 360 + reserator mod 600L/H ANTEC 920 + rad 120 ANTEC 920 + rad 180 ( Black Ice Micro Dual 80mm... W7 ultimate 
MonitorKeyboardPowerCase
ASUS ML248H G510 OCZ ZX 1250W CM HAF-XB 
MouseAudio
RAT 7 G35 
CPUMotherboardGraphicsGraphics
2600K oc 4.8GHZ maximus IV extreme TRI-SLI GTX 580 GTX 580 
GraphicsRAMCoolingCooling
GTX 580 corsair dominator corsair H100 antec 620 
CoolingCoolingKeyboardPower
antec 620 antec 620 g510 ocz 1250w 
CaseMouse
nzxt switch 810 g500 
CPUMotherboardGraphicsGraphics
I7 2600K OC 4.8Ghz 1.44V 24/7 ASUS maximus IV-Z gene GTX 580 GTX 580 
RAMHard DriveOptical DriveCooling
Corsair Dominator 4x2 go WD 1T / SSD M4 64gb ASUS DRW 24B1ST corsair H100 
CoolingCoolingOSMonitor
antec 620 GPU antec 620 GPU windows 7 ASUS ML248H 
KeyboardPowerCaseMouse
logitech G510 OCZ 1000w ZX NZXT Switch 810  G500 
Audio
CM sirus 
  hide details  
Reply
post #45 of 8626
Ok, I can get the lapping plate within one tenth of a micron.
IC7 particle size is less than 40 micron.
I can't see the reason to apply tim when it will actually be larger than the total variation of the surface.
Also the die cover would only have the very smallest amount removed so there is no risk of the transistors being harmed.
Anyone know of a tim with a smaller particle size?
XPS+
(9 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2500K Asus z68 v-pro MSI N580GTX TF II/OC G. Skill Ripjaws 
Hard DriveCoolingOSPower
WD Caviar Black Hyper 212+ Windows 7 64 Corsair TX 750 
Case
CM HAF 922 
  hide details  
Reply
XPS+
(9 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2500K Asus z68 v-pro MSI N580GTX TF II/OC G. Skill Ripjaws 
Hard DriveCoolingOSPower
WD Caviar Black Hyper 212+ Windows 7 64 Corsair TX 750 
Case
CM HAF 922 
  hide details  
Reply
post #46 of 8626
Quote:
Originally Posted by lucas.vulcan View Post

is yes? where the problem is feasible

I assume that you mean that the VRM's and memory will be sufficiently cooled with the stock fan after modding, even while overclocking and overvolting.
SB goodness
(14 items)
 
Core 2 duo
(9 items)
 
folder
(8 items)
 
CPUMotherboardGraphicsRAM
2500k @ 4.6ghz,1.47v 24/7 GIGABYTE GA-P67A-UD4-B3 $200 EVGA GTX 970 SSC @ 1505mhz 16gb 2400 SuperSC DDR3 
Hard DriveCoolingOSPower
960gb Sandisk Ultra II Corsair H100i v2 Windows 7 64-bit SeaSonic X650 Gold 
CaseMouseMouse Pad
Obsidian Series® 750D Airflow Edition Zowie FK 2 Speed by Surface/Steelseries SX/Steelseries 9HD 
CPUMotherboardGraphicsRAM
Core 2 Duo E6750 Asus P5n32-e SLI EVGA 8800gt superclocked @ 750/725 gaming/folding 4gb Fatal!ty ddr2 800 
Hard DriveCoolingOSPower
64gb SSD Stock Win 7 64 bit Corsair CX500 
Case
NZXT 
CPUMotherboardGraphicsRAM
Intel Pentium E6300 MSI G41M4-F GTX 460 2gb A-data ddr2 800 
Hard DriveOSPowerCase
150gb raptor Ubuntu 13.04 64-bit Coolmax 520W NZXT 
  hide details  
Reply
SB goodness
(14 items)
 
Core 2 duo
(9 items)
 
folder
(8 items)
 
CPUMotherboardGraphicsRAM
2500k @ 4.6ghz,1.47v 24/7 GIGABYTE GA-P67A-UD4-B3 $200 EVGA GTX 970 SSC @ 1505mhz 16gb 2400 SuperSC DDR3 
Hard DriveCoolingOSPower
960gb Sandisk Ultra II Corsair H100i v2 Windows 7 64-bit SeaSonic X650 Gold 
CaseMouseMouse Pad
Obsidian Series® 750D Airflow Edition Zowie FK 2 Speed by Surface/Steelseries SX/Steelseries 9HD 
CPUMotherboardGraphicsRAM
Core 2 Duo E6750 Asus P5n32-e SLI EVGA 8800gt superclocked @ 750/725 gaming/folding 4gb Fatal!ty ddr2 800 
Hard DriveCoolingOSPower
64gb SSD Stock Win 7 64 bit Corsair CX500 
Case
NZXT 
CPUMotherboardGraphicsRAM
Intel Pentium E6300 MSI G41M4-F GTX 460 2gb A-data ddr2 800 
Hard DriveOSPowerCase
150gb raptor Ubuntu 13.04 64-bit Coolmax 520W NZXT 
  hide details  
Reply
post #47 of 8626
Thread Starter 
Quote:
Originally Posted by Steelbarrage View Post

Ok, I can get the lapping plate within one tenth of a micron.
IC7 particle size is less than 40 micron.
I can't see the reason to apply tim when it will actually be larger than the total variation of the surface.
Also the die cover would only have the very smallest amount removed so there is no risk of the transistors being harmed.
Anyone know of a tim with a smaller particle size?

You will also need to lap the cooler head like I did as as It's not perfectly flat. The TIM would help fill in the gaps.

450

Bypass the IHS lapping all together and connect straight to the die. Like I eventually did here:

http://www.overclock.net/t/1173936/gtx-480-sli-ihs-mod/0_50#post_15777072
Edited by Rage19420 - 2/1/12 at 3:09pm
Me Rig
(15 items)
 
HTPC
(7 items)
 
Phenom
(12 items)
 
CPUMotherboardGraphicsRAM
i7-5820k X99 Extreme4 MSI GTX 1070 SEA HAWK X Corsair Vengeance Series 32GB 
Hard DriveHard DriveOptical DriveCooling
Seagate 1Tb Samsung 840 SSD Sony 22X Dual Format/Double Layer DVD±R/±RW Hydro Series H80i 
OSMonitorPowerCase
Windows 10 Asus VG278H 3D Vision 2  Cooler Master V1000 Corsair Obsidian 450D 
CPUMotherboardGraphicsRAM
i7 920 MSI Pro e x58 4 - Xfx R9 280x Black DD Corsair 1600mhz 12gn 
Hard DriveOSPower
Crucial 128 SSD Windows 8.1 2xCorsair CS750m 
CPUMotherboardGraphicsRAM
i7 2700k Gigabyte Z68MA-D2H-B3 Palit Gtx 480 w/Antec 620 Mod Crucial 16GB Kit DDR3  
Hard DriveHard DriveCoolingOS
Crucial M4 SSD WD Caviar Black Antec 620 W7 Home 
MonitorKeyboardPowerCase
Asus VH222H Saitek Cyborg Antec BP550 Plus 550W  Dont Ask 
  hide details  
Reply
Me Rig
(15 items)
 
HTPC
(7 items)
 
Phenom
(12 items)
 
CPUMotherboardGraphicsRAM
i7-5820k X99 Extreme4 MSI GTX 1070 SEA HAWK X Corsair Vengeance Series 32GB 
Hard DriveHard DriveOptical DriveCooling
Seagate 1Tb Samsung 840 SSD Sony 22X Dual Format/Double Layer DVD±R/±RW Hydro Series H80i 
OSMonitorPowerCase
Windows 10 Asus VG278H 3D Vision 2  Cooler Master V1000 Corsair Obsidian 450D 
CPUMotherboardGraphicsRAM
i7 920 MSI Pro e x58 4 - Xfx R9 280x Black DD Corsair 1600mhz 12gn 
Hard DriveOSPower
Crucial 128 SSD Windows 8.1 2xCorsair CS750m 
CPUMotherboardGraphicsRAM
i7 2700k Gigabyte Z68MA-D2H-B3 Palit Gtx 480 w/Antec 620 Mod Crucial 16GB Kit DDR3  
Hard DriveHard DriveCoolingOS
Crucial M4 SSD WD Caviar Black Antec 620 W7 Home 
MonitorKeyboardPowerCase
Asus VH222H Saitek Cyborg Antec BP550 Plus 550W  Dont Ask 
  hide details  
Reply
post #48 of 8626
Thread Starter 
Quote:
Originally Posted by Cakewalk_S View Post

The die? or the heat spreader? I'm telling you the die shouldn't be concave at all. It should be perfectly flat, or else it probably wouldn't work.
They should be made on plates like this:
347
So it'd have to be perfectly flat or else it was manufactured wrong... I'm still confused

I think what he means is the edge of the die is slightly rounded. Could be due to the process when cutting.
Me Rig
(15 items)
 
HTPC
(7 items)
 
Phenom
(12 items)
 
CPUMotherboardGraphicsRAM
i7-5820k X99 Extreme4 MSI GTX 1070 SEA HAWK X Corsair Vengeance Series 32GB 
Hard DriveHard DriveOptical DriveCooling
Seagate 1Tb Samsung 840 SSD Sony 22X Dual Format/Double Layer DVD±R/±RW Hydro Series H80i 
OSMonitorPowerCase
Windows 10 Asus VG278H 3D Vision 2  Cooler Master V1000 Corsair Obsidian 450D 
CPUMotherboardGraphicsRAM
i7 920 MSI Pro e x58 4 - Xfx R9 280x Black DD Corsair 1600mhz 12gn 
Hard DriveOSPower
Crucial 128 SSD Windows 8.1 2xCorsair CS750m 
CPUMotherboardGraphicsRAM
i7 2700k Gigabyte Z68MA-D2H-B3 Palit Gtx 480 w/Antec 620 Mod Crucial 16GB Kit DDR3  
Hard DriveHard DriveCoolingOS
Crucial M4 SSD WD Caviar Black Antec 620 W7 Home 
MonitorKeyboardPowerCase
Asus VH222H Saitek Cyborg Antec BP550 Plus 550W  Dont Ask 
  hide details  
Reply
Me Rig
(15 items)
 
HTPC
(7 items)
 
Phenom
(12 items)
 
CPUMotherboardGraphicsRAM
i7-5820k X99 Extreme4 MSI GTX 1070 SEA HAWK X Corsair Vengeance Series 32GB 
Hard DriveHard DriveOptical DriveCooling
Seagate 1Tb Samsung 840 SSD Sony 22X Dual Format/Double Layer DVD±R/±RW Hydro Series H80i 
OSMonitorPowerCase
Windows 10 Asus VG278H 3D Vision 2  Cooler Master V1000 Corsair Obsidian 450D 
CPUMotherboardGraphicsRAM
i7 920 MSI Pro e x58 4 - Xfx R9 280x Black DD Corsair 1600mhz 12gn 
Hard DriveOSPower
Crucial 128 SSD Windows 8.1 2xCorsair CS750m 
CPUMotherboardGraphicsRAM
i7 2700k Gigabyte Z68MA-D2H-B3 Palit Gtx 480 w/Antec 620 Mod Crucial 16GB Kit DDR3  
Hard DriveHard DriveCoolingOS
Crucial M4 SSD WD Caviar Black Antec 620 W7 Home 
MonitorKeyboardPowerCase
Asus VH222H Saitek Cyborg Antec BP550 Plus 550W  Dont Ask 
  hide details  
Reply
post #49 of 8626
Thread Starter 
Quote:
Originally Posted by icehotshot View Post

I assume that you mean that the VRM's and memory will be sufficiently cooled with the stock fan after modding, even while overclocking and overvolting.

Yes as long as you have decent air flow thru your case you should be fine.
Me Rig
(15 items)
 
HTPC
(7 items)
 
Phenom
(12 items)
 
CPUMotherboardGraphicsRAM
i7-5820k X99 Extreme4 MSI GTX 1070 SEA HAWK X Corsair Vengeance Series 32GB 
Hard DriveHard DriveOptical DriveCooling
Seagate 1Tb Samsung 840 SSD Sony 22X Dual Format/Double Layer DVD±R/±RW Hydro Series H80i 
OSMonitorPowerCase
Windows 10 Asus VG278H 3D Vision 2  Cooler Master V1000 Corsair Obsidian 450D 
CPUMotherboardGraphicsRAM
i7 920 MSI Pro e x58 4 - Xfx R9 280x Black DD Corsair 1600mhz 12gn 
Hard DriveOSPower
Crucial 128 SSD Windows 8.1 2xCorsair CS750m 
CPUMotherboardGraphicsRAM
i7 2700k Gigabyte Z68MA-D2H-B3 Palit Gtx 480 w/Antec 620 Mod Crucial 16GB Kit DDR3  
Hard DriveHard DriveCoolingOS
Crucial M4 SSD WD Caviar Black Antec 620 W7 Home 
MonitorKeyboardPowerCase
Asus VH222H Saitek Cyborg Antec BP550 Plus 550W  Dont Ask 
  hide details  
Reply
Me Rig
(15 items)
 
HTPC
(7 items)
 
Phenom
(12 items)
 
CPUMotherboardGraphicsRAM
i7-5820k X99 Extreme4 MSI GTX 1070 SEA HAWK X Corsair Vengeance Series 32GB 
Hard DriveHard DriveOptical DriveCooling
Seagate 1Tb Samsung 840 SSD Sony 22X Dual Format/Double Layer DVD±R/±RW Hydro Series H80i 
OSMonitorPowerCase
Windows 10 Asus VG278H 3D Vision 2  Cooler Master V1000 Corsair Obsidian 450D 
CPUMotherboardGraphicsRAM
i7 920 MSI Pro e x58 4 - Xfx R9 280x Black DD Corsair 1600mhz 12gn 
Hard DriveOSPower
Crucial 128 SSD Windows 8.1 2xCorsair CS750m 
CPUMotherboardGraphicsRAM
i7 2700k Gigabyte Z68MA-D2H-B3 Palit Gtx 480 w/Antec 620 Mod Crucial 16GB Kit DDR3  
Hard DriveHard DriveCoolingOS
Crucial M4 SSD WD Caviar Black Antec 620 W7 Home 
MonitorKeyboardPowerCase
Asus VH222H Saitek Cyborg Antec BP550 Plus 550W  Dont Ask 
  hide details  
Reply
post #50 of 8626
Quote:
Originally Posted by Rage19420 View Post

I think what he means is the edge of the die is slightly rounded. Could be due to the process when cutting.

LOL, OMG that is HUGE.

If you look at your chip when its exposed after IHS removal and lay the edge of a razer blade to the top of the chip you will notice that the chip does bevel down ever so slightly with the middle of the chip beign the high point. Its extreamly minimal but its still there. I only noticed when i got up close with the bottow of the H70 pump and i could see light on all edges of the chip, i then used a razer and then checked again and yes indeed the chip is raised in the middle slightly. Check for your selfs to confirm. A few dozen whips with 1200grit sandpaper would take it down. VERY RISKY WOOT, me loves it.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA Cooling
Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Cooling › [Official] NVIDIA GPU Mod Club - AKA "The Mod"