Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Cooling › [Official] NVIDIA GPU Mod Club - AKA "The Mod"
New Posts  All Forums:Forum Nav:

[Official] NVIDIA GPU Mod Club - AKA "The Mod" - Page 74

post #731 of 8626
Quote:
Originally Posted by Sebba513 View Post

I think that the block and gpu chip is on correctly, i have included a picture.450

480

You need to have a ziptie loop around the bracket on the cooler, then run the excess from the ziptie up through the holes then have another ziptie and use it like a nut on a bolt and just pull it tight on the card. You did put down thermal paste right? IT's not the best pic but notice how there's zipties coming up through the mounting holes on the PCB, then there's another set of zipties acting as nuts holding it tight.
450
post #732 of 8626
Ya, taking another look at that picture I agree with the others it doesn't look very tight.
Use some pliers for grip and really tighten the crap out of those things.

What TIM are you using?
Rig 2.0
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Asus P8Z77-V EVGA GTX780 SC ACX Samsung DDR 3 (2 DIMMS) MV-3V4G3D/US 
Hard DriveHard DriveOptical DriveCooling
Samsung 830 SSD WD Caviar Black Asus DVD/RW Xigmatek s-1283 HDT (Air Cooling) 
CoolingCoolingOSMonitor
Scythe Slipstream 1200RPM (x2) Antec 140mm + Antec 120mm + Xigmatek 120mm (x2) Win 7 64bit Acer S243HL bmii - 24" 
PowerCaseMouseAudio
Corsair TX750 Corsair Carbide 300R MX 518 Auzentek X-Fi Forte 7.1 
  hide details  
Reply
Rig 2.0
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Asus P8Z77-V EVGA GTX780 SC ACX Samsung DDR 3 (2 DIMMS) MV-3V4G3D/US 
Hard DriveHard DriveOptical DriveCooling
Samsung 830 SSD WD Caviar Black Asus DVD/RW Xigmatek s-1283 HDT (Air Cooling) 
CoolingCoolingOSMonitor
Scythe Slipstream 1200RPM (x2) Antec 140mm + Antec 120mm + Xigmatek 120mm (x2) Win 7 64bit Acer S243HL bmii - 24" 
PowerCaseMouseAudio
Corsair TX750 Corsair Carbide 300R MX 518 Auzentek X-Fi Forte 7.1 
  hide details  
Reply
post #733 of 8626
Tried the other zip tie method. Idled at 32, improvement. This time furmark stabilized for a while at 75 - 80c. After a minute artifacts appeared, the graphics card made a weird sound so I quit furmark.. it might be the VRM's is my guess, which I am going to cool soon. But why are the temps so high, at 70?

450

Also, the TIM I am using is Arctic Silver 5
Edited by Sebba513 - 4/9/12 at 6:38am
post #734 of 8626
Bad pump me is thinking.
post #735 of 8626
Do the temperatures still spike?
If so I'd consider an RMA and try a new pump.
Rig 2.0
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Asus P8Z77-V EVGA GTX780 SC ACX Samsung DDR 3 (2 DIMMS) MV-3V4G3D/US 
Hard DriveHard DriveOptical DriveCooling
Samsung 830 SSD WD Caviar Black Asus DVD/RW Xigmatek s-1283 HDT (Air Cooling) 
CoolingCoolingOSMonitor
Scythe Slipstream 1200RPM (x2) Antec 140mm + Antec 120mm + Xigmatek 120mm (x2) Win 7 64bit Acer S243HL bmii - 24" 
PowerCaseMouseAudio
Corsair TX750 Corsair Carbide 300R MX 518 Auzentek X-Fi Forte 7.1 
  hide details  
Reply
Rig 2.0
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Asus P8Z77-V EVGA GTX780 SC ACX Samsung DDR 3 (2 DIMMS) MV-3V4G3D/US 
Hard DriveHard DriveOptical DriveCooling
Samsung 830 SSD WD Caviar Black Asus DVD/RW Xigmatek s-1283 HDT (Air Cooling) 
CoolingCoolingOSMonitor
Scythe Slipstream 1200RPM (x2) Antec 140mm + Antec 120mm + Xigmatek 120mm (x2) Win 7 64bit Acer S243HL bmii - 24" 
PowerCaseMouseAudio
Corsair TX750 Corsair Carbide 300R MX 518 Auzentek X-Fi Forte 7.1 
  hide details  
Reply
post #736 of 8626
Just ran furmark for a while now, maybe five minutes with temperatures at 77 c. I guess it was stable there, but still not as impressive as what everyone else here has achieved.

Plus, the corsair fans on the H60 as really loud, they are running at max speed going through 3 pin to molex. I don't have a fan controller :/
post #737 of 8626
Did you reapply the TIM when you changed the mount? Next time you have to change it try using more TIM than you did before, it's okay for it to squeeze out the sides.
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
post #738 of 8626
Quote:
Originally Posted by Sebba513 View Post

Just ran furmark for a while now, maybe five minutes with temperatures at 77 c. I guess it was stable there, but still not as impressive as what everyone else here has achieved.
Plus, the corsair fans on the H60 as really loud, they are running at max speed going through 3 pin to molex. I don't have a fan controller :/

Ya something is still up... I am running my GTX 470 at 1.083 volts with the Fan on low/medium (just at whisper speed) and I still don't get above ~61'c.
You should be seeing better numbers with the fan on full speed.
Rig 2.0
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Asus P8Z77-V EVGA GTX780 SC ACX Samsung DDR 3 (2 DIMMS) MV-3V4G3D/US 
Hard DriveHard DriveOptical DriveCooling
Samsung 830 SSD WD Caviar Black Asus DVD/RW Xigmatek s-1283 HDT (Air Cooling) 
CoolingCoolingOSMonitor
Scythe Slipstream 1200RPM (x2) Antec 140mm + Antec 120mm + Xigmatek 120mm (x2) Win 7 64bit Acer S243HL bmii - 24" 
PowerCaseMouseAudio
Corsair TX750 Corsair Carbide 300R MX 518 Auzentek X-Fi Forte 7.1 
  hide details  
Reply
Rig 2.0
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Asus P8Z77-V EVGA GTX780 SC ACX Samsung DDR 3 (2 DIMMS) MV-3V4G3D/US 
Hard DriveHard DriveOptical DriveCooling
Samsung 830 SSD WD Caviar Black Asus DVD/RW Xigmatek s-1283 HDT (Air Cooling) 
CoolingCoolingOSMonitor
Scythe Slipstream 1200RPM (x2) Antec 140mm + Antec 120mm + Xigmatek 120mm (x2) Win 7 64bit Acer S243HL bmii - 24" 
PowerCaseMouseAudio
Corsair TX750 Corsair Carbide 300R MX 518 Auzentek X-Fi Forte 7.1 
  hide details  
Reply
post #739 of 8626
Well, now I'm idling at 62 but now have sound issues.. I hope you can hear them in this video over the loud corsair fans that I have to do something about.
What are those sounds? Before I thought they were coil whines, but I don't have the heatsink on anymore.

Sounds like an airplane in there, but the sound is like a whine from something, maybe the mosfets? I have no idea, but they come on every
like 5 seconds and last about 3. Also, they don't appear when I am not running furmark.
post #740 of 8626
If the sound is only present when the GPU is stressed I'd point a finger at the coils making the sound.
Rig 2.0
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Asus P8Z77-V EVGA GTX780 SC ACX Samsung DDR 3 (2 DIMMS) MV-3V4G3D/US 
Hard DriveHard DriveOptical DriveCooling
Samsung 830 SSD WD Caviar Black Asus DVD/RW Xigmatek s-1283 HDT (Air Cooling) 
CoolingCoolingOSMonitor
Scythe Slipstream 1200RPM (x2) Antec 140mm + Antec 120mm + Xigmatek 120mm (x2) Win 7 64bit Acer S243HL bmii - 24" 
PowerCaseMouseAudio
Corsair TX750 Corsair Carbide 300R MX 518 Auzentek X-Fi Forte 7.1 
  hide details  
Reply
Rig 2.0
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Asus P8Z77-V EVGA GTX780 SC ACX Samsung DDR 3 (2 DIMMS) MV-3V4G3D/US 
Hard DriveHard DriveOptical DriveCooling
Samsung 830 SSD WD Caviar Black Asus DVD/RW Xigmatek s-1283 HDT (Air Cooling) 
CoolingCoolingOSMonitor
Scythe Slipstream 1200RPM (x2) Antec 140mm + Antec 120mm + Xigmatek 120mm (x2) Win 7 64bit Acer S243HL bmii - 24" 
PowerCaseMouseAudio
Corsair TX750 Corsair Carbide 300R MX 518 Auzentek X-Fi Forte 7.1 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA Cooling
Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Cooling › [Official] NVIDIA GPU Mod Club - AKA "The Mod"