Overclock.net › Forums › Graphics Cards › AMD/ATI › ATI Cooling › [Official] AMD/ATI GPU Mod Club - AKA "The Red Mod"
New Posts  All Forums:Forum Nav:

[Official] AMD/ATI GPU Mod Club - AKA "The Red Mod" - Page 22

post #211 of 3006
All right here it is...

H-Series cooler v1.0

DSC00601.png

DSC00600.png

Idles
Stock100vsh60furmarkbenchmarkidle.png

Load
Stock100vsh60furmarkbenchmarkLoad.png

H-Series Cooler v2.0

H806970.png

H806970_2.png

v1.0 is gonna go on my other card now that v2.0 is done. Hopefully gonna do it tomorrow. thumb.gif
Edited by dekciW - 4/3/12 at 12:50am
     
CPUMotherboardGraphicsRAM
Intel i7 3770k @ 4.5/1.26v ASUS Maximus Formula V XFX R290X 16GB CORSAIR DOMINATOR GT DDR3 2133Mhz 
Hard DriveOptical DriveCoolingCooling
x2 WD WD2500HHTZ, x2 WD WD5000HHTZ (Raid0), Sea... Samsung SH-222AB Corsair H100 Quad-Fan - CPU Corsair H80/H80 - 6990 
OSMonitorKeyboardPower
7 Ultimate x64 SP1 3x Samsung S27A750D in Eyefinity Microsoft Sidewinder X6 Corsair AX1200 
CaseMouseMouse PadAudio
Cooler Master Haf X (Temp Case) NZXT Avatar S (Black) Xtrac PADS RIPPER XXL Razer Megalodon/Maelstrom Audio Engine 7.1 
AudioAudioAudio
Sony CECHYA-0080 Wireless Headset/Onboard Realt... Harman/Kardon AVR 1600 - Sony SAVS-150H 7.1 Spe... Harman/Kardon 330A - Cinema Acoustics CSX-1200 ... 
CPUMotherboardGraphicsRAM
Intel C2D E6700 (Conroe) @ 3.6Ghz Intel D975XBX2 "Bad Axe 2" ATi Radeon X1950 Pro 4GB DualChan Corsair Dominator PC6400 @ 720Mhz 
Hard DriveOptical DriveCoolingOS
Old 130gb 5400rpm Seagate  SH22AB H60 Dual Fan Intake 
PowerCaseMouse Pad
Corsair TX750v2 NZXT Apollo None 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel i7 3770k @ 4.5/1.26v ASUS Maximus Formula V XFX R290X 16GB CORSAIR DOMINATOR GT DDR3 2133Mhz 
Hard DriveOptical DriveCoolingCooling
x2 WD WD2500HHTZ, x2 WD WD5000HHTZ (Raid0), Sea... Samsung SH-222AB Corsair H100 Quad-Fan - CPU Corsair H80/H80 - 6990 
OSMonitorKeyboardPower
7 Ultimate x64 SP1 3x Samsung S27A750D in Eyefinity Microsoft Sidewinder X6 Corsair AX1200 
CaseMouseMouse PadAudio
Cooler Master Haf X (Temp Case) NZXT Avatar S (Black) Xtrac PADS RIPPER XXL Razer Megalodon/Maelstrom Audio Engine 7.1 
AudioAudioAudio
Sony CECHYA-0080 Wireless Headset/Onboard Realt... Harman/Kardon AVR 1600 - Sony SAVS-150H 7.1 Spe... Harman/Kardon 330A - Cinema Acoustics CSX-1200 ... 
CPUMotherboardGraphicsRAM
Intel C2D E6700 (Conroe) @ 3.6Ghz Intel D975XBX2 "Bad Axe 2" ATi Radeon X1950 Pro 4GB DualChan Corsair Dominator PC6400 @ 720Mhz 
Hard DriveOptical DriveCoolingOS
Old 130gb 5400rpm Seagate  SH22AB H60 Dual Fan Intake 
PowerCaseMouse Pad
Corsair TX750v2 NZXT Apollo None 
  hide details  
Reply
post #212 of 3006
!!
How did you manage to keep the shroud intact?
Did you just cut a hole through both layers?

Does the VRM/MOSFET cover still fit with the pump or did that require mods too?
post #213 of 3006
Hi guys, I've just installed my 620 to my unlocked 6950 n temps are at low 30s and I need do a reseat as it was hard to hold the bracket screws and pump on my own,
Anyway my pump is making an awful racket. The rad is higher than the pump
post #214 of 3006
Quote:
Originally Posted by richie_2010 View Post

Hi guys, I've just installed my 620 to my unlocked 6950 n temps are at low 30s and I need do a reseat as it was hard to hold the bracket screws and pump on my own,
Anyway my pump is making an awful racket. The rad is higher than the pump

Hey man that didnt take too long to get there. Did your stock heatsink use springs on the bolts? If so then use them on the backside of the card and it will hold the nut from spinning.
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.8 ghz ASRock Z68 Extreme 3 GTX 680 SLI G Skill Ripjaws 1600 
Hard DriveCoolingMonitorPower
256GB M4 SSD Raystorm CPU block Asus VW246H Nvidia Surround Kingwin Lazer 1kw 
Case
NZXT Switch 810 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.8 ghz ASRock Z68 Extreme 3 GTX 680 SLI G Skill Ripjaws 1600 
Hard DriveCoolingMonitorPower
256GB M4 SSD Raystorm CPU block Asus VW246H Nvidia Surround Kingwin Lazer 1kw 
Case
NZXT Switch 810 
  hide details  
Reply
post #215 of 3006
Ah never thought using them, when I 1st put it on I got artifacts so I took the card out did it up abit more n now it works great except the pump noise, I didn't manage to get loads of pics but will up what I got.

I could say the 4 holes with the corners missing the bolts came straight through them that was my main problem so if you could try n leave a small amount of metal there that would be better or 4 small metal washers to compensate (which is what I used)
My card has a slight flex is that normal
post #216 of 3006
Makes perfect since about the holes being cut all the way out, dang Im dumb, The amd holes are so close together but I think I can sneak a little more metal there and the pump still fit in. If you got a flex then you are probably tightening them too much, it doesnt take that much pressure to hold it.
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.8 ghz ASRock Z68 Extreme 3 GTX 680 SLI G Skill Ripjaws 1600 
Hard DriveCoolingMonitorPower
256GB M4 SSD Raystorm CPU block Asus VW246H Nvidia Surround Kingwin Lazer 1kw 
Case
NZXT Switch 810 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.8 ghz ASRock Z68 Extreme 3 GTX 680 SLI G Skill Ripjaws 1600 
Hard DriveCoolingMonitorPower
256GB M4 SSD Raystorm CPU block Asus VW246H Nvidia Surround Kingwin Lazer 1kw 
Case
NZXT Switch 810 
  hide details  
Reply
post #217 of 3006
I put it on and tightened it up and there was a slight flex so I slacked it off n got the artifacts so did it back up n was good to go. Ive had to take the backplate off so that could be the cause
post #218 of 3006
Quote:
Originally Posted by richie_2010 View Post

Hi guys, I've just installed my 620 to my unlocked 6950 n temps are at low 30s and I need do a reseat as it was hard to hold the bracket screws and pump on my own,
Anyway my pump is making an awful racket. The rad is higher than the pump


What? 6950 unlocked on the low 30's? I'm assuming C's and on idle and what's your ambient? That's pretty low for an unlocked 6950, pics wo9uld be appreciated!

Intel System 2011
(18 items)
 
AMD System 2009
(14 items)
 
 
CPUMotherboardGraphicsRAM
Athlon II X4 630 Propus @ 3.5Ghz Gigabyte GA-880GM-UD2H Rev.1 ASUS EAH5450 SILENT/DI/512MD2(LP) 4x2GB G.Skill NQ DDR3 PC 1600 
Hard DriveOptical DriveCoolingOS
Seagate Momentus XT LG GSA-H30N Scythe Samurai ZZ Rev.B Win7 x64 Ultimate 
MonitorKeyboardPowerCase
LG CS 460 - 32" LCD TV Microsoft Reclusa Gaming Keyboard Thermaltake TR2 750w Fractal Design Core 1000 
Mouse
Microsoft Comfort Mouse 6000 
  hide details  
Reply
Intel System 2011
(18 items)
 
AMD System 2009
(14 items)
 
 
CPUMotherboardGraphicsRAM
Athlon II X4 630 Propus @ 3.5Ghz Gigabyte GA-880GM-UD2H Rev.1 ASUS EAH5450 SILENT/DI/512MD2(LP) 4x2GB G.Skill NQ DDR3 PC 1600 
Hard DriveOptical DriveCoolingOS
Seagate Momentus XT LG GSA-H30N Scythe Samurai ZZ Rev.B Win7 x64 Ultimate 
MonitorKeyboardPowerCase
LG CS 460 - 32" LCD TV Microsoft Reclusa Gaming Keyboard Thermaltake TR2 750w Fractal Design Core 1000 
Mouse
Microsoft Comfort Mouse 6000 
  hide details  
Reply
post #219 of 3006
I'm on my phone at min so will up pics tomorrow after work, I was at 45c on stock n now low 30s idle that's with a gelid vrm cooler copper heatsinks on ram and just a 200mm side fan at 700 rpm n 1 noctua fan on rad.
post #220 of 3006
Quote:
Originally Posted by richie_2010 View Post

I'm on my phone at min so will up pics tomorrow after work, I was at 45c on stock n now low 30s idle that's with a gelid vrm cooler copper heatsinks on ram and just a 200mm side fan at 700 rpm n 1 noctua fan on rad.



Good stuff! This will be making me think getting that universal GPU block was a waste of money and should have stuck with this mod...

Intel System 2011
(18 items)
 
AMD System 2009
(14 items)
 
 
CPUMotherboardGraphicsRAM
Athlon II X4 630 Propus @ 3.5Ghz Gigabyte GA-880GM-UD2H Rev.1 ASUS EAH5450 SILENT/DI/512MD2(LP) 4x2GB G.Skill NQ DDR3 PC 1600 
Hard DriveOptical DriveCoolingOS
Seagate Momentus XT LG GSA-H30N Scythe Samurai ZZ Rev.B Win7 x64 Ultimate 
MonitorKeyboardPowerCase
LG CS 460 - 32" LCD TV Microsoft Reclusa Gaming Keyboard Thermaltake TR2 750w Fractal Design Core 1000 
Mouse
Microsoft Comfort Mouse 6000 
  hide details  
Reply
Intel System 2011
(18 items)
 
AMD System 2009
(14 items)
 
 
CPUMotherboardGraphicsRAM
Athlon II X4 630 Propus @ 3.5Ghz Gigabyte GA-880GM-UD2H Rev.1 ASUS EAH5450 SILENT/DI/512MD2(LP) 4x2GB G.Skill NQ DDR3 PC 1600 
Hard DriveOptical DriveCoolingOS
Seagate Momentus XT LG GSA-H30N Scythe Samurai ZZ Rev.B Win7 x64 Ultimate 
MonitorKeyboardPowerCase
LG CS 460 - 32" LCD TV Microsoft Reclusa Gaming Keyboard Thermaltake TR2 750w Fractal Design Core 1000 
Mouse
Microsoft Comfort Mouse 6000 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: ATI Cooling
Overclock.net › Forums › Graphics Cards › AMD/ATI › ATI Cooling › [Official] AMD/ATI GPU Mod Club - AKA "The Red Mod"