Overclock.net › Forums › Graphics Cards › AMD/ATI › ATI Cooling › [Official] AMD/ATI GPU Mod Club - AKA "The Red Mod"
New Posts  All Forums:Forum Nav:

[Official] AMD/ATI GPU Mod Club - AKA "The Red Mod" - Page 9

post #81 of 3007
Quote:
Originally Posted by bmgjet View Post

800/1250mhz going by furmark.
Also you might want to test furmark in full screen since it doesnt use cross fire properly in windowed.

Those are the clocks and thanks for the tip thumb.gif I have been using it while trying to dial everything in and have found it eliminated the coil whine I was getting and the load drops.
Quote:
Originally Posted by Krusher33 View Post

Seems rather low then... or is that how it is when crossfiring?

Those are the stock clocks of the 6950's

I have been able to play bf3 on ultra with everything maxed and get temps of low 50's. But the kicker with that is all case fans are running at the minimum and the antecs are set to run at 60% ... the gf's laptop 15ft away is louder than the tower right beside me. When I was still running everything at 100% I had upped the GPU clock to 880 and mem to 1300 ... ended up with gpu 1 with a max of 64c and a average of well 64c gpu 2 rang in at a max of 61c and the same 61c average ... pretty damn stable temps after 15 mins. I haven't bothered to find the upper limit of the cards or the cooling, honestly really don't see the need.

100fan880gpu1300mem1105v.jpg
post #82 of 3007
Meh... the pics on the laptop is terrible. I thought you had 6800 series. But I agree.... there's no need if you can play BF3 at max. That's stink'n awesome!
My gaming desk
(14 items)
 
Miner
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX-8350 ASUS Sabertooth 990FX Sapphire 290x Patriot Viper Extreme Division 4 
Hard DriveHard DriveCoolingCooling
OCZ Vertex 460 WD 1TB Blue Koolance 380A EK-FC R9-290X 
OSMonitorKeyboardPower
Windows 8.1 64-bit Monoprice 27" IPS-Glass Pro Panel DUCKY! Antec HCP 850W 
CaseMouse
Hand built wooden desk Logitech G700S 
CPUMotherboardGraphicsGraphics
AMD A10 7850K ASUS A88X-Pro Sapphire 280x Sapphire 280x 
RAMHard DriveHard DriveCooling
Patriot Viper Xtreme Div4 1866mhz 60GB Vertex2 WD Caviar 500AAKS XSPC Rasa 
OSPowerCase
Windows 7 64 bit EVGA 1000W G2 Thermaltake Level 10 GTS 
  hide details  
Reply
My gaming desk
(14 items)
 
Miner
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX-8350 ASUS Sabertooth 990FX Sapphire 290x Patriot Viper Extreme Division 4 
Hard DriveHard DriveCoolingCooling
OCZ Vertex 460 WD 1TB Blue Koolance 380A EK-FC R9-290X 
OSMonitorKeyboardPower
Windows 8.1 64-bit Monoprice 27" IPS-Glass Pro Panel DUCKY! Antec HCP 850W 
CaseMouse
Hand built wooden desk Logitech G700S 
CPUMotherboardGraphicsGraphics
AMD A10 7850K ASUS A88X-Pro Sapphire 280x Sapphire 280x 
RAMHard DriveHard DriveCooling
Patriot Viper Xtreme Div4 1866mhz 60GB Vertex2 WD Caviar 500AAKS XSPC Rasa 
OSPowerCase
Windows 7 64 bit EVGA 1000W G2 Thermaltake Level 10 GTS 
  hide details  
Reply
post #83 of 3007
You can right click the images and open in new tab, then the images will be full sized.
post #84 of 3007
>Overclock.net
>Doesn't know how to zoom images
>doh.gif
Sorry biggrin.gif
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Asus P8P67-M XFX HD 6970 2x4GB Ripjaws X 1600 9-9-9-24 
Hard DriveHard DriveOptical DriveCooling
Samsung 830, 128 GB Various HDDs Sony NEC Optiarc DVD burner Cooler Master Hyper 212+ (CPU) 
CoolingOSMonitorKeyboard
Accelero Twin Turbo II (GPU) Windows 7 Ultimate 64-bit LG E2360 Microsoft SideWinder X6 
PowerCaseMouseMouse Pad
Corsair 650TX v2 CM HAF 912 Plus Razer DeathAdder Steelseries SX 
AudioAudio
Audio Technica ATH-M50x Fiio E07K 
  hide details  
Reply
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Asus P8P67-M XFX HD 6970 2x4GB Ripjaws X 1600 9-9-9-24 
Hard DriveHard DriveOptical DriveCooling
Samsung 830, 128 GB Various HDDs Sony NEC Optiarc DVD burner Cooler Master Hyper 212+ (CPU) 
CoolingOSMonitorKeyboard
Accelero Twin Turbo II (GPU) Windows 7 Ultimate 64-bit LG E2360 Microsoft SideWinder X6 
PowerCaseMouseMouse Pad
Corsair 650TX v2 CM HAF 912 Plus Razer DeathAdder Steelseries SX 
AudioAudio
Audio Technica ATH-M50x Fiio E07K 
  hide details  
Reply
post #85 of 3007
Ha ha ha, wow. Fail on my part. But in my defense, in the old site, just click the image.
My gaming desk
(14 items)
 
Miner
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX-8350 ASUS Sabertooth 990FX Sapphire 290x Patriot Viper Extreme Division 4 
Hard DriveHard DriveCoolingCooling
OCZ Vertex 460 WD 1TB Blue Koolance 380A EK-FC R9-290X 
OSMonitorKeyboardPower
Windows 8.1 64-bit Monoprice 27" IPS-Glass Pro Panel DUCKY! Antec HCP 850W 
CaseMouse
Hand built wooden desk Logitech G700S 
CPUMotherboardGraphicsGraphics
AMD A10 7850K ASUS A88X-Pro Sapphire 280x Sapphire 280x 
RAMHard DriveHard DriveCooling
Patriot Viper Xtreme Div4 1866mhz 60GB Vertex2 WD Caviar 500AAKS XSPC Rasa 
OSPowerCase
Windows 7 64 bit EVGA 1000W G2 Thermaltake Level 10 GTS 
  hide details  
Reply
My gaming desk
(14 items)
 
Miner
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX-8350 ASUS Sabertooth 990FX Sapphire 290x Patriot Viper Extreme Division 4 
Hard DriveHard DriveCoolingCooling
OCZ Vertex 460 WD 1TB Blue Koolance 380A EK-FC R9-290X 
OSMonitorKeyboardPower
Windows 8.1 64-bit Monoprice 27" IPS-Glass Pro Panel DUCKY! Antec HCP 850W 
CaseMouse
Hand built wooden desk Logitech G700S 
CPUMotherboardGraphicsGraphics
AMD A10 7850K ASUS A88X-Pro Sapphire 280x Sapphire 280x 
RAMHard DriveHard DriveCooling
Patriot Viper Xtreme Div4 1866mhz 60GB Vertex2 WD Caviar 500AAKS XSPC Rasa 
OSPowerCase
Windows 7 64 bit EVGA 1000W G2 Thermaltake Level 10 GTS 
  hide details  
Reply
post #86 of 3007
Finally installed my Kuhler on my HD6850. I installed a shroud and lapped the cooler.

Prior to installation, my temp was at 57c on 980/1100.
After installation, my temp is 43c on same clocks.

I'm going to OC it some more tomorrow. biggrin.gif
My gaming desk
(14 items)
 
Miner
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX-8350 ASUS Sabertooth 990FX Sapphire 290x Patriot Viper Extreme Division 4 
Hard DriveHard DriveCoolingCooling
OCZ Vertex 460 WD 1TB Blue Koolance 380A EK-FC R9-290X 
OSMonitorKeyboardPower
Windows 8.1 64-bit Monoprice 27" IPS-Glass Pro Panel DUCKY! Antec HCP 850W 
CaseMouse
Hand built wooden desk Logitech G700S 
CPUMotherboardGraphicsGraphics
AMD A10 7850K ASUS A88X-Pro Sapphire 280x Sapphire 280x 
RAMHard DriveHard DriveCooling
Patriot Viper Xtreme Div4 1866mhz 60GB Vertex2 WD Caviar 500AAKS XSPC Rasa 
OSPowerCase
Windows 7 64 bit EVGA 1000W G2 Thermaltake Level 10 GTS 
  hide details  
Reply
My gaming desk
(14 items)
 
Miner
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX-8350 ASUS Sabertooth 990FX Sapphire 290x Patriot Viper Extreme Division 4 
Hard DriveHard DriveCoolingCooling
OCZ Vertex 460 WD 1TB Blue Koolance 380A EK-FC R9-290X 
OSMonitorKeyboardPower
Windows 8.1 64-bit Monoprice 27" IPS-Glass Pro Panel DUCKY! Antec HCP 850W 
CaseMouse
Hand built wooden desk Logitech G700S 
CPUMotherboardGraphicsGraphics
AMD A10 7850K ASUS A88X-Pro Sapphire 280x Sapphire 280x 
RAMHard DriveHard DriveCooling
Patriot Viper Xtreme Div4 1866mhz 60GB Vertex2 WD Caviar 500AAKS XSPC Rasa 
OSPowerCase
Windows 7 64 bit EVGA 1000W G2 Thermaltake Level 10 GTS 
  hide details  
Reply
post #87 of 3007
bahh.. so i changed my setup a bit (got a new case) and i had to re position the 620. Now im getting temps of 92 on furmark. Re seated twice to no avail. If i use my hand to squeeze the 620 and my 5870 i can get my 55 deg back. I am thinking I don't have enough pressure between the 620 and the die. Am i crazy to think that its my zip ties. I am using different ones then then my original.
post #88 of 3007
try using tools like pliers to tighten the ties if you havent already
zen dream
(14 items)
 
the old nag
(13 items)
 
 
CPUMotherboardGraphicsRAM
Zen 1700 Asrock B350 Pro4 MSI RX 480 4GB Crucial Ballistix DDR4 2400 2x4GB 
Hard DriveCoolingMonitorKeyboard
*ntel 600p 256GB NVMe Thermalright TRUE Spirit 140 Direct Dell SE2717HX Filco Magestouch MX Brown Tenkeyless 
PowerCaseMouseMouse Pad
SeaSonic M12II 620W Antec 300 Logitech G400 Glorious PC Gaming Large 
AudioOther
Sennheiser HD598 CyberPower CP1500 
CPUMotherboardRAMHard Drive
Phenom II x4 955 Asus M3N78 PRO 2GB Corsair XMS2-8500 DDR2 5-5-5-15 (2) OCZ 128GB SSD 
Hard DriveHard DriveHard DriveHard Drive
OCZ 30 GB SSD Samsung 2TB WD Black 2TB  WD Green 2TB 
OSMonitorPowerCase
Windows 10 x64 Dell P2414H Corsair CX430 v2 Fractal Design Define R5 
Other
Linksys EA6350 AC1200+  
  hide details  
Reply
zen dream
(14 items)
 
the old nag
(13 items)
 
 
CPUMotherboardGraphicsRAM
Zen 1700 Asrock B350 Pro4 MSI RX 480 4GB Crucial Ballistix DDR4 2400 2x4GB 
Hard DriveCoolingMonitorKeyboard
*ntel 600p 256GB NVMe Thermalright TRUE Spirit 140 Direct Dell SE2717HX Filco Magestouch MX Brown Tenkeyless 
PowerCaseMouseMouse Pad
SeaSonic M12II 620W Antec 300 Logitech G400 Glorious PC Gaming Large 
AudioOther
Sennheiser HD598 CyberPower CP1500 
CPUMotherboardRAMHard Drive
Phenom II x4 955 Asus M3N78 PRO 2GB Corsair XMS2-8500 DDR2 5-5-5-15 (2) OCZ 128GB SSD 
Hard DriveHard DriveHard DriveHard Drive
OCZ 30 GB SSD Samsung 2TB WD Black 2TB  WD Green 2TB 
OSMonitorPowerCase
Windows 10 x64 Dell P2414H Corsair CX430 v2 Fractal Design Define R5 
Other
Linksys EA6350 AC1200+  
  hide details  
Reply
post #89 of 3007
I used the technique that you would use to tighten lug nuts on a wheel. Start with one, the do opposite corner, then move to next one, then opposite corner, move to next one, opposite corner, etc. Until none of them clicked anymore.

Also, I had to lap mine because the copper plating was scratched to hell. As it turns out... there was a huge convex anyways. It had a pretty good size bulge that it took many rounds of 220 grit to get it down some. Might be something to think about.
My gaming desk
(14 items)
 
Miner
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX-8350 ASUS Sabertooth 990FX Sapphire 290x Patriot Viper Extreme Division 4 
Hard DriveHard DriveCoolingCooling
OCZ Vertex 460 WD 1TB Blue Koolance 380A EK-FC R9-290X 
OSMonitorKeyboardPower
Windows 8.1 64-bit Monoprice 27" IPS-Glass Pro Panel DUCKY! Antec HCP 850W 
CaseMouse
Hand built wooden desk Logitech G700S 
CPUMotherboardGraphicsGraphics
AMD A10 7850K ASUS A88X-Pro Sapphire 280x Sapphire 280x 
RAMHard DriveHard DriveCooling
Patriot Viper Xtreme Div4 1866mhz 60GB Vertex2 WD Caviar 500AAKS XSPC Rasa 
OSPowerCase
Windows 7 64 bit EVGA 1000W G2 Thermaltake Level 10 GTS 
  hide details  
Reply
My gaming desk
(14 items)
 
Miner
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX-8350 ASUS Sabertooth 990FX Sapphire 290x Patriot Viper Extreme Division 4 
Hard DriveHard DriveCoolingCooling
OCZ Vertex 460 WD 1TB Blue Koolance 380A EK-FC R9-290X 
OSMonitorKeyboardPower
Windows 8.1 64-bit Monoprice 27" IPS-Glass Pro Panel DUCKY! Antec HCP 850W 
CaseMouse
Hand built wooden desk Logitech G700S 
CPUMotherboardGraphicsGraphics
AMD A10 7850K ASUS A88X-Pro Sapphire 280x Sapphire 280x 
RAMHard DriveHard DriveCooling
Patriot Viper Xtreme Div4 1866mhz 60GB Vertex2 WD Caviar 500AAKS XSPC Rasa 
OSPowerCase
Windows 7 64 bit EVGA 1000W G2 Thermaltake Level 10 GTS 
  hide details  
Reply
post #90 of 3007
Thread Starter 
Could also be that you havnt used enough thermal compound. As said the the 620 is quite convex, And the die also has a slight convex to it so it wont be much contract with out some thermal compound.
Also if you used smaller cable ties they might have quite a bit of give in them allowing them to stretch slightly.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: ATI Cooling
Overclock.net › Forums › Graphics Cards › AMD/ATI › ATI Cooling › [Official] AMD/ATI GPU Mod Club - AKA "The Red Mod"