All right, for anyone who's still watching, I'm finally back and I'm going to be ordering some last parts to make it look prettier.
I have recently discovered that EK offers white acetal and red plexi tops for their current water blocks, not their new circle ones that are horrible, but for the Supreme HF and gen1 FC7970/FC680s, so I'm definitely going to be grabbing white acetal tops for my two blocks, I just think it'll add some much needed pizzazz to the build! I'm also going to be grabbing some more BitFenix extenders for my SATA cables, case cables, SATA power cables, and my fan controller cables. On top of this I'll be grabbing four more Yate Loon low speeds in red; currently I have push pull (I'll have to upload some pictures), but it's with two Cooler Master Sickle Flow fans, which are medium high speeds, and an Antec red LED fan, also a high speed fan, so it's got the noise up quite a bit. Lastly I'm considering grabbing some red and white Monsoon fittings. Just to make everything easier, here's a list of parts that are up and coming:
-EK Supreme HF white acetal top
-EK FC7970 white acetal top
-4x Yate Loon red low speeds
-BitFenix red extenders for:
-1x 8-pin (for 7970)
-5x 3 pin to 3x3pin for fan controller
-NZXT Phantom door with window (white)
-Monsoon reds/whites (24 total) 3/8" x 5/8"
Next up are some more components. I'm grabbing Corsair low profile Vengeances, 16GB total, 2x4GB red and 2x4GB white. Passed that I'm getting a Corsair Force GT 60GB for Windows and a WD 1TB Caviar Black, and because of this I'm going to have to remount my HDD cage so that they aren't all sitting in the drive bays. I'll most likely have to use a rivet gun to lock the drive bay cage into the case, since there aren't any screw holes that fit, and no other jerry rigging stuff works from what I can tell. So I'll have a 1TB, a 500GB, and a 60GB SSD. That'll be nice. The last thing I will be doing is getting a second 7970 with an EK FC7970 plexi copper, since that's the only one I can find, a white top and a backplate along with an EK dual card bridge in parallel, which will make it look a lot cleaner. Once that's done and I've fixed any visible cables or disorganised looks I am considering grabbing an AX850 and personally sleeving all of the cables with white and red MDCP sleeves, but that will come later, not too sure about that. So now for a list of components that are up and coming:
-Corsair Vengeance 2x4GB white
-Corsair Vengeance 2x4GB red
-Corsair Force GT 60GB SSD
-Western Digital 1TB Caviar Black
-Sapphire 7970 OC reference
-EK FC7970 plexi/copper
-EK FC7970 white acetal top
-EK Dual card bridge w/ 2x links (parallel)
I'm not too sure how quickly everything will be coming in, stick around for updates!